Panasonic PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT (serv.man5) Service Manual ▷ View online
INF-1
CONTENTS
Service Information
Model No. PT-VZ575N series
PT-VW535N series
PT-VX605N series
SECTION 1 SERVICE INFORMATION
(2017-03)
SECTION 1 SERVICE INFORMATION
1. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-2
1. 1. Projector body
1. 2. Control panel
1. 3. Connecting terminals
1. 4. Remote controls
1. 4. Remote controls
2. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-6
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-10
3. 1. Setting to Service Mode
3. 2. Cancelling the Service Mode
3. 3. Functions of Service Mode
3. 3. Functions of Service Mode
4. External Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-13
4. 1. Control through Serial terminal
4. 2. Control through LAN terminal
4. 3. Control commands List
5. Notes on service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-18
5. 1. Before service operation
5. 2. Service
5. 3. Replacement of consumable parts
5. 4. Security password
5. 3. Replacement of consumable parts
5. 4. Security password
6. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-23
6. 1. Shutdown system
6. 2. Lamp log data acquisition method
6. 3. Displaying the lamp log data
6. 4. Lamp log table
6. 5. Troubleshooting
INF-2
SECTION 1 SERVICE INFORMATION
1. The name of each part
1. 1. Projector body
Attention
f Do not drop the remote control.
f Avoid contact with liquids.
f Do not attempt to modify or disassemble the remote control.
f Please observe the following contents that are described on
the back of the remote control unit (see the right picture).
1. Do not use a new battery together with an old battery.
1. Do not use a new battery together with an old battery.
2. Do not use unspecified batteries.
3. Make sure the polarities (+ and -) are correct when inserting the batteries.
f
In addition, please read the contents that are related to batteries in the "Read this first!".
Note
f
The remote control can be used within a distance of about 7 m (22′11-5/8″) if pointed directly at the remote control signal
receiver. The remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective control
range may be reduced.
range may be reduced.
f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not
operate correctly.
f
You can operate the projector by reflecting the remote control signal on the screen. The operating range may differ due to
the loss of light caused by the properties of the screen.
the loss of light caused by the properties of the screen.
f
When the remote control signal receiver is lit with a fluorescent light or other strong light source, the projector may become
inoperative. Set the projector as far from the luminous source as possible.
inoperative. Set the projector as far from the luminous source as possible.
Projector body
4
1
2
3
5
4
12
13
6
6
6 6
7
8
9 10 11
r
Front
r
Side
r
Rear
Projection direction
WARNING
Keep your hands and other objects away from the air
exhaust port.
exhaust port.
f
Keep your hands and face away.
f
Do not insert your fingers.
f
Keep heat-sensitive objects away.
Heated air from the air exhaust port can cause burns,
injury, or deformations.
injury, or deformations.
1 Remote control signal receiver
2 Focus Lever
Adjusts the focus.
3 Zoom Lever
Adjusts the zoom.
4 Adjustable feet
Adjusts the projection angle.
5 Projection Lens
6 Air exhaust port
7 Speaker
8 <AC IN> terminal
Connects the supplied power cord.
9 Security slot
This security slot is compatible with the Kensington security
cables.
cables.
10 Connecting terminals (
Æ
page 27)
11 Burglar hook port
Attaches a burglar prevention cable, etc.
12
Air filter cover
The air filter unit is inside.
13 Air intake port
1. 请勿把旧电池和新电池一起使用。
2. 请勿使用不合规格的电池。
3. 确保电池安装正确。
原产地：中国
1.Do not use old battery with new one.
2.Do not use batteries other than the
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
3.Be sure the batteries are inserted properly.
Made in China
ENGLISH
- 25
Chapter 1 Preparation - About your projector
Some of the pages on this section are excerpted from the owner's
manual, thus the reference page numbers on pages indicate those
for owner's manual .
manual, thus the reference page numbers on pages indicate those
for owner's manual .
INF-3
SECTION 1 SERVICE INFORMATION
1. 2. Control panel
6
11
14
15
16
Projection direction
r
Bottom
r
Top
14 Control panel and Indicators
15 Lamp cover
The lamp unit is inside.
16 Vertical lens shift dial
Adjusts the vertical position of the projected image.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel and Indicators
1
Power button <v/b>
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
3 Lamp indicator <LAMP>
Displays the status of the lamp.
4 Temperature indicator <TEMP>
Displays the status of the internal temperature.
5 Ambient Luminance sensor
Detects room's light and select proper image quality.
6 <MENU> button
Displays or hides the main menu.
(
Æ
page 53)
7 <ENTER> button
Determines and executes an item in the menu screen.
8 <INPUT SELECT> button
Switches the input signal to project. (
Æ
page 47)
9 asqw buttons
Navigates the menu screen.
And use qw to adjust the volume level, use as to
page up or page down files such as PowerPoint
And use qw to adjust the volume level, use as to
page up or page down files such as PowerPoint
®
through
wireless manager.
10 <AUTO SETUP/CANCEL> button
Automatically adjusts the image display position while
projecting the image.(
projecting the image.(
Æ
page 46)
In addition, it acts as <CANCEL> button when using the
MEMORY VIEWER function.
26 - ENGLISH
Chapter 1 Preparation - About your projector
6
11
14
15
16
Projection direction
r
Bottom
r
Top
14 Control panel and Indicators
15 Lamp cover
The lamp unit is inside.
16 Vertical lens shift dial
Adjusts the vertical position of the projected image.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel and Indicators
1
Power button <v/b>
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
3 Lamp indicator <LAMP>
Displays the status of the lamp.
4 Temperature indicator <TEMP>
Displays the status of the internal temperature.
5 Ambient Luminance sensor
Detects room's light and select proper image quality.
6 <MENU> button
Displays or hides the main menu.
(
Æ
page 53)
7 <ENTER> button
Determines and executes an item in the menu screen.
8 <INPUT SELECT> button
Switches the input signal to project. (
Æ
page 47)
9 asqw buttons
Navigates the menu screen.
And use qw to adjust the volume level, use as to
page up or page down files such as PowerPoint
And use qw to adjust the volume level, use as to
page up or page down files such as PowerPoint
®
through
wireless manager.
10 <AUTO SETUP/CANCEL> button
Automatically adjusts the image display position while
projecting the image.(
projecting the image.(
Æ
page 46)
In addition, it acts as <CANCEL> button when using the
MEMORY VIEWER function.
26 - ENGLISH
Chapter 1 Preparation - About your projector
INF-4
SECTION 1 SERVICE INFORMATION
1. 3. Connecting terminals
r Connecting terminals
1 <COMPUTER 2 IN/1 OUT> terminal
This is the terminal to input RGB signals or YC
B
C
R
/YP
B
P
R
signals. Or output the RGB signals or YC
B
C
R
/YP
B
P
R
signals to an external device.
2 <COMPUTER 1 IN> terminal
This is the terminal to input RGB signals, Y/C signals or
YC
B
C
R
/YP
B
P
R
signals.
3 <HDMI 1 IN> terminal
This is the terminal to input HDMI1 signals.
4 <HDMI 2 IN> terminal
This is the terminal to input HDMI2 signals.
5 <USB B (DISPLAY)> terminal
This terminal is used to connect the projector to the
computer with a USB cable when you want to use the
USB display function of the application software "Wireless
computer with a USB cable when you want to use the
USB display function of the application software "Wireless
Manager ME6.2".
For details, please refer to the "Operating Instructions-
Wireless Manager ME6.2" in CD-ROM.
6 <USB A (VIEWER)> terminal
This terminal is to insert the USB memory directly.
(
(
Æ
page 119)
7 <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network.
This is also used when connecting a device for
transmitting video and audio signals via the LAN terminal.
This is also used when connecting a device for
transmitting video and audio signals via the LAN terminal.
8 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally
control the projector by connecting a computer.
control the projector by connecting a computer.
9 <VIDEO IN> terminal
This is the terminal to input video signals.
10 <AUDIO IN 3 (L/R)> terminal
This is the terminal to input audio signals.
Left input <L> and right input <R> are provided for the
<AUDIO IN 3> terminal.
Left input <L> and right input <R> are provided for the
<AUDIO IN 3> terminal.
11 <AUDIO IN 1> terminal
This is the terminal to input audio signals.
12 <AUDIO IN 2 (MIC IN)> terminal
This is the terminal to input audio signals. Or connect the
MIC to this terminal.
13 <VARIABLE AUDIO OUT> terminal
This is the terminal to output the input audio signal to the
projector.
projector.
Attention
f
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
ENGLISH
- 27
Chapter 1 Preparation - About your projector
Some of the pages on this section are excerpted from the owner's
manual, thus the reference page numbers on pages indicate those
for owner's manual .
manual, thus the reference page numbers on pages indicate those
for owner's manual .
Click on the first or last page to see other PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT (serv.man5) service manuals if exist.