Panasonic PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT (serv.man5) Service Manual ▷ View online
INF-6
SECTION 1 SERVICE INFORMATION
2. Menu Navigation
Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
button
1) Press the <MENU> button on the remote control or the control panel.
f The main menu screen appears.
2) Press as to select an item from the main menu.
f The selected item is highlighted in yellow.
3) Press the <ENTER> button.
f The submenu is displayed, and submenu items become selectable.
4) Press as to select the desired sub-menu item, press qw or the <ENTER> button to set or adjust settings.
f Some items will switch in order as follows each time you press qw.
A
B
C
f
For some items, press qw to display an individual adjustment screen with a bar scale as shown below.
ENGLISH
- 53
Chapter 4 Settings - Menu Navigation
Some of the pages on this section are excerpted from the owner's
manual, thus the reference page numbers on pages indicate those
for owner's manual .
manual, thus the reference page numbers on pages indicate those
for owner's manual .
INF-7
SECTION 1 SERVICE INFORMATION
Note
f Pressing the <MENU> button or <RETURN> button while the menu screen is displayed returns to the previous menu.
f Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME
LOCK] may not be displayed depending on the input signal.
f Some items can be adjusted even if signals are not input.
f
Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.
f
For menu items, refer to “Main menu” (
Æ
page 54) and “Sub menu” (
Æ
page 54).
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory
default settings.
default settings.
button
1) Press the <DEFAULT> button on the remote control.
Note
f You cannot reset all the settings to the factory default at a time.
f
To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP]
menu → [INITIALIZE ALL]. (
Æ
page 84)
f
Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
Main menu
The main menu consists of the following 7 menu items.
When a main menu item is selected, the screen changes to a submenu selection screen.
Main-menu item
Page
[PICTURE]
57
[POSITION]
62
[LANGUAGE]
70
[DISPLAY OPTION]
71
[PROJECTOR SETUP]
78
[SECURITY]
85
[NETWORK/USB]
88
Sub menu
The sub-menu screen of the selected main menu appears, and you can set and adjust the various items in the submenu.
[PICTURE]
Sub-menu item
Factory default
Page
[PICTURE MODE]
[STANDARD]*
1
57
54 - ENGLISH
Chapter 4 Settings - Menu Navigation
INF-8
SECTION 1 SERVICE INFORMATION
Sub-menu item
Factory default
Page
[CONTRAST]
[0]
57
[BRIGHTNESS]
[0]
57
[COLOR]*
2
[0]
58
[TINT]*
2
[0]
58
[SHARPNESS]
[8]
58
[COLOR TEMPERATURE]
[DEFAULT]
58
[IRIS]
[ON]
59
[ADVANCED MENU]
-
59
[DAYLIGHT VIEW]
[AUTO]
59
[DIGITAL CINEMA REALITY]*
2
[ON]
60
[NOISE REDUCTION]*
3
[OFF]
60
[TV-SYSTEM]*
3
[AUTO]
60
[RGB/YP
B
P
R
] / [RGB/YC
B
C
R
]*
4
[AUTO]
60
*1 It may be different depending on the input signal.
*2 Only for movie-based signals.
*3 Only when the <VIDEO IN> terminal is selected.
*4 Only when the <COMPUTER 1 IN> / <COMPUTER 2 IN/1 OUT> / <HDMI 1 IN> / <HDMI 2 IN> / <DIGITAL LINK/LAN>
terminal is selected.
Note
f The factory default settings may vary depending on the picture mode.
[POSITION]
Sub-menu item
Factory default
Page
[REALTIME KEYSTONE]
[ON]
62
[SCREEN ADJUSTMENT]
-
62, 64
[SHIFT]
-
67
[DOT CLOCK]*
1
[0]
68
[CLOCK PHASE]*
1
[0]
68
[OVER SCAN]
-
68
[ASPECT]
-
68
[FRAME LOCK]*
1
[OFF]
69
*1 Only for still image signals.
[LANGUAGE]
Details (Æ page 70)
[DISPLAY OPTION]
Sub-menu item
Factory default
Page
[ON-SCREEN DISPLAY]
-
71
[HDMI SIGNAL LEVEL]
[AUTO]
72
[DIGITAL LINK SIGNAL LEVEL]
[AUTO]
72
[CLOSED CAPTION SETTING]
-
73
[SCREEN SETTING]
-
73
[STARTUP LOGO]
[DEFAULT LOGO]
74
[AUTO SETUP SETTING]
[AUTO]
74
[SIGNAL SEARCH]
[ON]
75
[BACK COLOR]
[BLUE]
75
[WIDE MODE]
-
75
[SXGA MODE]
-
75
[P-TIMER]
-
76
[OTHER FUNCTIONS]
-
77
[PROJECTOR SETUP]
Sub-menu item
Factory default
Page
[STATUS]
-
78
ENGLISH
- 55
Chapter 4 Settings - Menu Navigation
INF-9
SECTION 1 SERVICE INFORMATION
Sub-menu item
Factory default
Page
[COMPUTER1 INPUT SETTING]
[RGB/YP
B
P
R
]
78
[COMPUTER2 SELECT]
[COMPUTER2 IN]
78
[PROJECTOR ID]
[ALL]
79
[INITIAL START UP]
[LAST MEMORY]
79
[PROJECTION METHOD]
[FRONT/DESK]
79
[LAMP POWER]
[NORMAL]
79
[ECO MANAGEMENT]
-
80
[RS-232C]
[PROJECTOR]
81
[EMULATE]
[DEFAULT]
81
[FUNCTION BUTTON]
-
82
[AUDIO SETTING]
-
82
[TEST PATTERN]
-
84
[FILTER COUNTER]
-
84
[INITIALIZE ALL]
-
84
[SECURITY]
Sub-menu item
Factory Default
Page
[PASSWORD]
[OFF]
85
[PASSWORD CHANGE]
-
85
[TEXT DISPLAY]
[OFF]
86
[TEXT CHANGE]
-
86
[MENU LOCK]
[OFF]
86
[MENU LOCK PASSWORD]
-
86
[CONTROL DEVICE SETUP]
-
87
[NETWORK/USB]
Sub-menu item
Factory default
Page
[DIGITAL LINK MODE]
[AUTO]
88
[DIGITAL LINK SETUP]
-
88
[DIGITAL LINK STATUS]
-
89
[WIRED LAN]
-
89
[WIRELESS LAN]
[SIMPLE]
90
[CONNECTION LOCK]
[OFF]
93
[NAME CHANGE]
-
94
[PASSWORD]
[OFF]
94
[PASSWORD CHANGE]
-
94
[NETWORK CONTROL]
[ON]
94
[AMX D. D.]
[OFF]
94
[Crestron Connected(TM)]
[OFF]
95
[EXTRON XTP]
[OFF]
95
[DIGITAL INTERFACE BOX]
-
95
[LIVE MODE CUT IN]
[OFF]
95
[MULTI-LIVE]*
1
-
95
[MEMORY VIEWER]
-
96
[VueMagic(TM)]
[OFF]
96
[STATUS]
-
97
[INITIALIZE]
-
97
*1 Only for [Panasonic APPLICATION] signals input.
Note
f Some items may not be adjusted or used for certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.
f
Sub-menu items and factory default settings differ depending on the selected input terminal.
56 - ENGLISH
Chapter 4 Settings - Menu Navigation
Click on the first or last page to see other PT-VZ575N / PT-VZ575ND / PT-VZ575NT / PT-VW535N / PT-VW535ND / PT-VW535NT / PT-VX605N / PT-VX605ND / PT-VX605NT (serv.man5) service manuals if exist.