DOWNLOAD Panasonic PT-VZ570 / PT-VZ570D / PT-VZ570T / PT-VW530 / PT-VW530D / PT-VW530T / PT-VX600 / PT-VX600D / PT-VX600T / PT-VX60 Service Manual ↓ Size: 36.48 MB | Pages: 108 in PDF or view online for FREE

Model
PT-VZ570 PT-VZ570D PT-VZ570T PT-VW530 PT-VW530D PT-VW530T PT-VX600 PT-VX600D PT-VX600T PT-VX60
Pages
108
Size
36.48 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / LCD PROJECTOR
File
pt-vz570-pt-vz570d-pt-vz570t-pt-vw530-pt-vw530d-pt.pdf
Date

Panasonic PT-VZ570 / PT-VZ570D / PT-VZ570T / PT-VW530 / PT-VW530D / PT-VW530T / PT-VX600 / PT-VX600D / PT-VX600T / PT-VX60 Service Manual ▷ View online

INF-4
SECTION 1 SERVICE INFORMATION
1. 3. Connecting terminals
 
r
Connecting terminals
1  <COMPUTER 2 IN/1 OUT> terminal
This is the terminal to input RGB signals or YC
B
C
R
/YP
B
P
R
 
signals.
Or output the RGB signals or YC
B
C
R
/YP
B
P
R
 
signals to an 
external device.
2  <COMPUTER 1 IN> terminal
This is the terminal to input RGB signals, Y/C signals or 
YC
B
C
R
/YP
B
P
R
 signals.
3  <HDMI 1 IN> terminal
This is the terminal to input HDMI1 signals.
4  <HDMI 2 IN> terminal
This is the terminal to input HDMI2 signals.
5  <LAN> terminal
This is the LAN terminal to connect to the network. 
6  <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally 
control the projector by connecting a computer.
7  <VIDEO IN> terminal
This is the terminal to input video signals.
8  <AUDIO IN 3 (L/R)> terminal
This is the terminal to input audio signals.
Left input <L> and right input <R> are provided for the 
<AUDIO IN 3> terminal.
9  <AUDIO IN 1> terminal
This is the terminal to input audio signals.
10  <AUDIO IN 2 (MIC IN)> terminal
This is the terminal to input audio signals. Or connect the 
MIC to this terminal.
11  <VARIABLE AUDIO OUT> terminal
This is the terminal to output the input audio signal to the 
projector. 
 
 
 
Attention
 
f
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Chapter 1   Preparation - About your projector
22 - ENGLISH
Some of the pages on this section are excerpted from the owner's 
manual, thus the reference page numbers on pages indicate those 
for owner's manual .
INF-5
SECTION 1 SERVICE INFORMATION
1. 4. Remote controls
About your projector
Remote control
1
2
4
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
1  Power button <v/b
Sets the projector to the state where the projector is 
switched off (standby mode). Also starts projection when 
the power is switched off (standby mode).
2  <COMPUTER 1> button
Switches the COMPUTER1 signal to project.
3  <COMPUTER 2> button
Switches the COMPUTER2 signal to project.
4  <HDMI 1> button
Switches the HDMI1 signal to project.
5  <HDMI 2> button
Switches the HDMI2 signal to project.
6  <ENTER> button/asq w buttons
Navigate the menu display. 
7  <MENU> button
Displays or hides the main menu. (x page 46)
8  <DEFAULT> button
Resets the content of the sub-menu to the factory 
default. (x page 47)
9  <FREEZE> button
Pauses the projected image and mute the audio 
temporarily. (x page 42)
10  <ID SET> button
Sets the ID number of the remote control to use for a 
system using multiple projectors. (x page 43)
11  Number buttons
Act as number buttons. Use these buttons when setting 
the remote control codes or entering the password.
12  Remote control signal transmitter
13  <AUTO SETUP> button
Automatically adjusts the image display position while 
projecting the image. (x page 40)
14  <VIDEO> button
Switches the VIDEO signal to project.
15  <RETURN> button
Return to the previous menu or cancel the setting.
16  <FUNCTION> button
Assigns a frequently used operation as a shortcut button. 
(x page 41)
17  <MUTE> button
Used to mute the audio. (x page 43)
18  <ID ALL> button
Used to simultaneously control all the projectors with one 
remote control for a system using multiple projectors. 
(x page 43)
19  <AV MUTE> button
Used to turn off the audio and video temporarily. 
(x page 43)
20  <D.ZOOM +/-> buttons
Zoom in and out the images. (x page 42)
21  <VOL +/-> buttons
Adjusts the volume of the built-in speaker or audio 
output. 
22  <P-TIMER> button
Operate the P-TIMER function. (x page 43)
23  <SCREEN ADJ> button
You can correct various types of distortion in a projected 
image. (x page 40)
Chapter 1   Preparation - About your projector
ENGLISH - 19
INF-6
SECTION 1 SERVICE INFORMATION
2. Menu Navigation
Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 
button
1)  Press the <MENU> button on the remote control or the control panel.
 
f
The main menu screen appears.
2)  Press as to select an item from the main menu.
 
f
The selected item is highlighted in yellow.
3)  Press the <ENTER> button.
 
f
The submenu is displayed, and submenu items become selectable.
4)  Press as to select the desired sub-menu item, press qw or the <ENTER> button to set or adjust settings.
 
f
Some items will switch in order as follows each time you press 
qw
.
A
B
C
 
f
For some items, press qw to display an individual adjustment screen with a bar scale as shown below.
Chapter 4   Settings - Menu Navigation
46 - ENGLISH
Some of the pages on this section are excerpted from the owner's 
manual, thus the reference page numbers on pages indicate those 
for owner's manual .
INF-7
SECTION 1 SERVICE INFORMATION
Note
 
f
Pressing the <MENU> button or <RETURN> button while the menu screen is displayed returns to the previous menu.
 
f
Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot 
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME 
LOCK] may not be displayed depending on the input signal.
 
f
Some items can be adjusted even if signals are not input.
 
f
Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.
 
f
For menu items, refer to “Main menu” (
Æ
 page 47) and “Sub menu” (
Æ
 page 47).
Resetting adjustment values to the factory default 
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory 
default settings.
button
1)  Press the <DEFAULT> button on the remote control.
Note
 
f
You cannot reset all the settings to the factory default at a time.
 
f
To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP] 
menu → [INITIALIZE ALL]. (
Æ
 page 76)
 
f
Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
Main menu
The main menu consists of the following 7 menu items.
When a main menu item is selected, the screen changes to a submenu selection screen.
Main-menu item
Page
[PICTURE]
50
[POSITION]
55
[LANGUAGE]
63
[DISPLAY OPTION]
64
[PROJECTOR SETUP]
70
[SECURITY]
77
[NETWORK]
80
Sub menu
The sub-menu screen of the selected main menu appears, and you can set and adjust the various items in the submenu.
[PICTURE] 
Sub-menu item
Factory default
Page
[PICTURE MODE]
[STANDARD]*
1
50
[CONTRAST]
[0]
50
Chapter 4   Settings - Menu Navigation
ENGLISH - 47
Page of 108
Display

Click on the first or last page to see other PT-VZ570 / PT-VZ570D / PT-VZ570T / PT-VW530 / PT-VW530D / PT-VW530T / PT-VX600 / PT-VX600D / PT-VX600T / PT-VX60 service manuals if exist.