Panasonic PT-VZ570 / PT-VZ570D / PT-VZ570T / PT-VW530 / PT-VW530D / PT-VW530T / PT-VX600 / PT-VX600D / PT-VX600T / PT-VX60 (serv.man2) Service Manual ▷ View online
5
PREFACE
2. Specifications
Power supply
AC 120 V, 50 Hz / 60 Hz (For North America)
AC 100 V - 240 V, 50 Hz / 60 Hz (For other countries)
AC 100 V - 240 V, 50 Hz / 60 Hz (For other countries)
Power consumption
PT-VZ570
372 W (3.5 A) (For North America)
378 W (4.3 A -1.7 A) (For other countries)
378 W (4.3 A -1.7 A) (For other countries)
PT-VW530,
PT-VX600/VX60
PT-VX600/VX60
356 W (3.3 A) (For North America)
362 W (4.1 A -1.6 A) (For other countries)
362 W (4.1 A -1.6 A) (For other countries)
When [STANDBY MODE] of [ECO MANAGEMENT] is set to [ECO] :
0.2 W (For North America), 0.4 W (For other countries)
When [STANDBY MODE] of [ECO MANAGEMENT] is set to [NORMAL] : 8 W
When [STANDBY MODE] of [ECO MANAGEMENT] is set to [NORMAL],
and [IN STANDBY MODE] of [AUDIO SETTING] is set to [ON] : 20 W
0.2 W (For North America), 0.4 W (For other countries)
When [STANDBY MODE] of [ECO MANAGEMENT] is set to [NORMAL] : 8 W
When [STANDBY MODE] of [ECO MANAGEMENT] is set to [NORMAL],
and [IN STANDBY MODE] of [AUDIO SETTING] is set to [ON] : 20 W
LCD panel
Size
PT-VZ570
1.63 cm (0.64") (aspect ratio 16 : 10)
PT-VW530
1.5 cm (0.59") (aspect ratio 16 : 10)
PT-VX600/VX60 1.6 cm (0.63") (aspect ratio 4 : 3)
Display system
Translucent screen LCD panel 3 panels, 3 primary color system
Drive system
Active matrix
Number of pixels
PT-VZ570
2 304 000 pixels (1 920 x 1 200 dots) x 3 panels
PT-VW530
1 024 000 pixels (1 280 x 800 dots) x 3 panels
PT-VX600/VX60 786 432 pixels (1 024 x 768 dots) x 3 panels
Lens
PT-VZ570
Manual zoom : 1.6x
Focus : F 1.6 - 2.12, f 15.30 mm - 24.64 mm
Focus : F 1.6 - 2.12, f 15.30 mm - 24.64 mm
PT-VW530,
PT-VX600/VX60
PT-VX600/VX60
Manual zoom : 1.6x
Focus : F 1.6 - 1.9, f 15.31 mm - 24.64 mm
Focus : F 1.6 - 1.9, f 15.31 mm - 24.64 mm
Luminous lamp
270 W, UHM lamp
Light output *
1
PT-VZ570
4 800 lm
PT-VW530
5 000 lm
PT-VX600/VX60 5 500 lm
Contrast ratio *
1
10 000 : 1
(When [PICTURE MODE] is set to [DYNAMIC], [LAMP POWER] is set to [NORMAL],
[IRIS] is set to [ON], [DAYLIGHT VIEW] is set to [OFF], and [AUTO POWER SAVE] is
set to [OFF])
(When [PICTURE MODE] is set to [DYNAMIC], [LAMP POWER] is set to [NORMAL],
[IRIS] is set to [ON], [DAYLIGHT VIEW] is set to [OFF], and [AUTO POWER SAVE] is
set to [OFF])
Applicable
scanning
frequency
scanning
frequency
For video signal
Horizontal : 15.73 kHz Vertical : 59.94 Hz, Horizontal : 15.63 kHz Vertical : 50 Hz
For Y/C signal
Horizontal : 15.73 kHz Vertical : 59.94 Hz, Horizontal : 15.63 kHz Vertical : 50 Hz
For RGB signal
Horizontal 15 kHz to 91 kHz, Vertical 24 Hz to 100 Hz
Dot clock frequency: 162 MHz or less
For YP
B
P
R
signal
[525i(480i)]
Horizontal 15.73 kHz, Vertical 59.94 Hz
[625i(576i)]
Horizontal 15.63 kHz, Vertical 50 Hz
[525p(480p)]
Horizontal 31.47 kHz, Vertical 59.94 Hz
[625p(576p)]
Horizontal 31.25 kHz, Vertical 50 Hz
[750(720)/60p]
Horizontal 45.00 kHz, Vertical 60 Hz
[750(720)/50p]
Horizontal 37.50 kHz, Vertical 50 Hz
[1125(1080)/60i]
Horizontal 33.75 kHz, Vertical 60 Hz
[1125(1080)/50i]
Horizontal 28.13 kHz, Vertical 50 Hz
[1125(1080)/60p] Horizontal 67.50 kHz, Vertical 60 Hz
[1125(1080)/50p] Horizontal 56.25 kHz, Vertical 50 Hz
[1125(1080)/24p] Horizontal 27.00 kHz, Vertical 24 Hz
[1125(1080)/24sF] Horizontal 27.00 kHz, Vertical 48 Hz
[1125(1080)/25p] Horizontal 28.13 kHz, Vertical 25 Hz
[1125(1080)/30p] Horizontal 33.75 kHz, Vertical 30 Hz
[1125(1080)/50p] Horizontal 56.25 kHz, Vertical 50 Hz
[1125(1080)/24p] Horizontal 27.00 kHz, Vertical 24 Hz
[1125(1080)/24sF] Horizontal 27.00 kHz, Vertical 48 Hz
[1125(1080)/25p] Horizontal 28.13 kHz, Vertical 25 Hz
[1125(1080)/30p] Horizontal 33.75 kHz, Vertical 30 Hz
HD/SYNC and V terminals are not compliant with 3 value composite SYNC
For HDMI signal
525i(480i)*
2
, 625i(576i)*
2
, 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p,
1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/25p, 1125(1080)/30p, 1125(1080)/60p,
1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i
Displayable resolution: VGA to WUXGA (non-interlace)
Dot clock frequency: 25 MHz to 162 MHz
1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i
Displayable resolution: VGA to WUXGA (non-interlace)
Dot clock frequency: 25 MHz to 162 MHz
Color system
7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projection size
0.76 m -7.62 m (30"-300")
ENGLISH - 113
6
PREFACE
Screen aspect ratio
PT-VZ570,
PT-VW530
PT-VW530
16:10
PT-VX600/VX60 4 : 3
Projection scheme
[FRONT/DESK], [FRONT/CEILING], [REAR/DESK], [REAR/CEILING]
(Menu setting system)
(Menu setting system)
Speaker
1 (4.0 cm round-type)
Maximum usable volume output 10 W
Terminals
<COMPUTER 1 IN>
1 set, high-density D-Sub 15 p (female)
[RGB signal]
[RGB signal]
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative polarity
compatible
VD TTL high impedance, automatic positive/negative polarity
compatible
compatible
VD TTL high impedance, automatic positive/negative polarity
compatible
[YP
B
P
R
signal]
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
[Y/C signal]
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
<COMPUTER 2 IN/
1 OUT>
1 OUT>
1 set, high-density D-Sub 15 p (female)
[RGB signal]
[RGB signal]
0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
HD/SYNC TTL high impedance, automatic positive/negative polarity
compatible
VD TTL high impedance, automatic positive/negative polarity
compatible
compatible
VD TTL high impedance, automatic positive/negative polarity
compatible
[YP
B
P
R
signal]
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<VIDEO IN>
1 set, pin jack 1.0 V [p-p] 75 Ω
<HDMI 1 IN> /
<HDMI 2 IN>
<HDMI 2 IN>
2 set (HDMI 19 pin, HDC
P and Deep color compatible)
Audio signals: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<AUDIO IN>
2 set (M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more)
(<AUDIO IN 2 (MIC IN)> terminal support MIC input)
1 set (Pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ and more)
<VARIABLE AU-
DIO OUT>
DIO OUT>
1 set (M3 stereo mini jack, stereo monitor output compatible,
0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less)
<SERIAL IN>
1 set (D-sub 9 pin, RS-232C compliant, for computer control use)
<LAN>
1 set (for RJ-45 network connection, PJLink compatible, 10Base-T/100Base-TX)
Power cable length
2.0 m (78-3/4")
Cabinet
Molded plastic
Dimensions
Width: 389 mm (15-5/16")
Height: 125 mm (4-29/32") (when adjustable feet shortened)
Depth: 332 mm (13-1/16")
Height: 125 mm (4-29/32") (when adjustable feet shortened)
Depth: 332 mm (13-1/16")
Weight
Approx. 4.8 kg (10.58 lbs.) *
3
Noise level *
1
When set to [NORMAL] in [LAM
P POWER] : 37 dB
When set to [ECO] in [LAM
P POWER] : 29 dB
Operating environment
Operating environment temperature *
4
:
0 °C (32 °F) to 40 °C (104 °F) (Elevation: below 1 200 m (3 937'))
0 °C (32 °F) to 30 °C (86 °F) (Elevation: 1 200 m (3 937') ~ 2 700 m (8 858'))
Operating environment humidity: 20 % to 80 % (no condensation)
0 °C (32 °F) to 30 °C (86 °F) (Elevation: 1 200 m (3 937') ~ 2 700 m (8 858'))
Operating environment humidity: 20 % to 80 % (no condensation)
Remote
control
control
Power supply
DC 3 V (AAA/R03/LR03 battery x 2)
Operating range
Approx. 7 m (22'11-5/8") (when operated directly in front of receiver)
Weight
63
g (2.22 ozs.) (including batteries)
Dimensions
Width : 44 mm (1-23/32"), Length : 105 mm (4-1/8"), Height : 20.5 mm (13/16")
*1 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*2
*2
Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*3 This is an average value. It may differ depending on individual product.
*4 [LAM
*4 [LAM
P POWER] will be switched to [ECO] automatically when the operating environment temperature is 35 °C (95 °F) to
40 °C (104 °F).
Note
f The part numbers of accessories and separately sold components are subject to change without notice.
114 -
ENGLISH
INF-1
CONTENTS
Service Information
Model No. PT-VZ570 series
PT-VW530 series
PT-VX600 series
PT-VX60
SECTION 1 SERVICE INFORMATION
Rev.-4 (2016-07)
SECTION 1 SERVICE INFORMATION
1. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-2
1. 1. Projector body
1. 2. Control panel
1. 3. Connecting terminals
1. 4. Remote controls
1. 4. Remote controls
2. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-6
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-10
3. 1. Setting to Service Mode
3. 2. Cancelling the Service Mode
3. 3. Functions of Service Mode
3. 3. Functions of Service Mode
4. External Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-13
4. 1. Control through Serial terminal
4. 2. Control through LAN terminal
4. 3. Control commands List
5. Notes on service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-18
5. 1. Before service operation
5. 2. Service
5. 3. Replacement of consumable parts
5. 3. Replacement of consumable parts
6. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-23
6. 1. Shutdown system
6. 2. Lamp log data acquisition method
6. 3. Displaying the lamp log data
6. 4. Lamp log table
6. 5. Troubleshooting
INF-2
SECTION 1 SERVICE INFORMATION
1. The name of each part
1. 1. Projector body
Attention
f Do not drop the remote control.
f Avoid contact with liquids.
f Do not attempt to modify or disassemble the remote control.
f Please observe the following contents that are described on
the back of the remote control unit (see the right picture).
1. Do not use a new battery together with an old battery.
2. Do not use unspecified batteries.
3. Make sure the polarities (+ and -) are correct when inserting the batteries.
f
In addition, please read the contents that are related to batteries in the “Read this first!”.
Note
f
The remote control can be used within a distance of about 7 m (22'11-5/8") if pointed directly at the remote control signal
receiver. The remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective control
range may be reduced.
f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not
operate correctly.
f
You can operate the projector by reflecting the remote control signal on the screen. The operating range may differ due to
the loss of light caused by the properties of the screen.
f
When the remote control signal receiver is lit with a fluorescent light or other strong light source, the projector may become
inoperative. Set the projector as far from the luminous source as possible.
inoperative. Set the projector as far from the luminous source as possible.
Projector body
6
4
1
2
3
5
4
12
13
6
6
6
7
8
9 10 11
r
Front
r
Side
r
Rear
Projection direction
WARNING
Keep your hands and other objects away from the air exhaust port.
f
Keep your hands and face away.
f
Do not insert your fingers.
f
Keep heat-sensitive objects away.
Heated air from the air exhaust port can cause burns, injury, or deformations.
1 Remote control signal receiver
2 Focus Lever
Ad
justs the focus.
3 Zoom Lever
Adjusts the zoom.
4 Adjustable feet
Adjusts the projection angle.
5 Projection Lens
6 Air exhaust port
7 Speaker
8 <AC IN> terminal
Connects the supplied power cord.
9 Security slot
This security slot is compatible with the Kensington
security cables.
security cables.
10 Connecting terminals (x page 22)
11 Burglar hook port
Attaches a burglar prevention cable, etc.
12
Air filter cover
The air filter unit is inside.
13 Air intake port
1. 请勿把旧电池和新电池一起使用。
2. 请勿使用不合规格的电池。
3. 确保电池安装正确。
原产地：中国
1.Do not use old battery with new one.
2.Do not use batteries other than the
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
3.Be sure the batteries are inserted properly.
Made in China
Chapter 1 Preparation - About your projector
20 - ENGLISH
Some of the pages on this section are excerpted from the owner's
manual, thus the reference page numbers on pages indicate those
for owner's manual .
manual, thus the reference page numbers on pages indicate those
for owner's manual .
Click on the first or last page to see other PT-VZ570 / PT-VZ570D / PT-VZ570T / PT-VW530 / PT-VW530D / PT-VW530T / PT-VX600 / PT-VX600D / PT-VX600T / PT-VX60 (serv.man2) service manuals if exist.