PT-VX505NU, PT-VX505NE, PT-VX505NEA, PT-VW435NU, PT-VW435NE, PT-VW435NEA (serv.man2) — Panasonic Projector Service Manual (repair manual). Page 5

View Panasonic PT-VX505NU / PT-VX505NE / PT-VX505NEA / PT-VW435NU / PT-VW435NE / PT-VW435NEA (serv.man2) Service Manual online

-5-
Specifications
Model No.
PT-VW435NU / E / EA
PT-VX505NU / E / EA
Power supply
AC100 V - 240 V 50 Hz/60 Hz
Power consumption
100 V - 240 V 4.0 A-1.6 A 365 W
When [Standby mode] of [Setting] is set to [ECO]: 0.3 W
When [Standby mode] of [Setting] is set to [Network]: 12.9 W or less
When [Standby MIC out] of [Sound] is set to [On]: Max.26 W
LCD panel
Panel size
1.5 cm(0.59")
(aspect ratio 16 : 10)
1.6 cm(0.63")
(aspect ratio 4 : 3)
Display method
3 transparent LCD panels (RGB)
Drive method
Active matrix method
Pixels
1 024 000
(1 280 x 800) x 3 panels
786 432
(1 024 x 768) x 3 panels
Lens
Manual zoom (1.6x) / Manual focus / Lens shift
F 1.6 to 2.12, f 15.28 mm to 24.62 mm
Luminous lamp
280 W UHM lamp
Light output 
*1
4 300 lm 
5 000 lm
A p p l i c a -
ble  scan-
ning  fre-
quency 
*3
for RGB signal
Horizontal 15 kHz to 100 kHz, Vertical 50 Hz to 100 Hz
Dot clock frequency: 140 MHz or less
for 
YPBPR
 signal
[525i(480i)]  
Horizontal 15.75 kHz, Vertical 60 Hz
[525p(480p)]  
Horizontal 31.5 kHz, Vertical 60 Hz
[750(720)/60p]   Horizontal 45 kHz, Vertical 60 Hz
[1 125(1080)/60i] Horizontal 33.75 kHz, Vertical 60 Hz
[625i(576i)]  
Horizontal 15.63 kHz, Vertical 50 Hz
[625p(576p)]  
Horizontal 31.25 kHz, Vertical 50 Hz
[750(720)/50p]   Horizontal 37.5 kHz, Vertical 50 Hz
[1 125(1080)50i]  Horizontal 28.13 kHz, Vertical 50 Hz
• HD/SYNC and V terminals are not compliant with 3 value composite SYNC
for Video signal (in-
cluding S-Video)
Horizontal 15.75 kHz / 15.63 kHz, Vertical 50 Hz / 60 Hz
for HDMI signal
525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1 125(1 080)/60p, 
1 125(1 080)/50p, 1 125(1 080)/60i, 1 125(1 080)/50i
• Displayable resolution: VGA to WUXGA (non-interlace)
• Dot clock frequency: up to 162 MH
Color system
7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projection size
0.76 m-7.62 m(30"-300")
Screen aspect ratio
16 : 10
4 : 3
Projection scheme
Front / Rear / Mount on Ceiling / Floor (Menu setting system)
Speaker
1 (4.0 cm round-type)
Maximum usable volume 
output
10 W
Contrast ratio 
*2
3 500 : 1 (all white / all black)
4 000 : 1 (all white / all black)
*1: These values of light output are measured under the condition that [Lamp power] is set to [Normal], 
  [Image select] is set to [Dynamic] and [Lens Shift] is adjusted to the lowest level. measurement, measuring 
  conditions and method of notation all comply with ISO21118 international standards.
*2: The value of contrast ratio is measured under the condition that [Lamp power] is set to [Normal], 
  [Image select] is set to [Dynamic], [Lens Shift] is adjusted to the lowest level and [Iris] is set to [On]. 
  Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*3: For details of video signals that can be projected using this projector, refer to “List of compatible signals” on the  
  user's manual.
Page of 127
Display

Click on the first or last page to see other PT-VX505NU / PT-VX505NE / PT-VX505NEA / PT-VW435NU / PT-VW435NE / PT-VW435NEA (serv.man2) service manuals if exist.