DOWNLOAD Panasonic PT-VX42Z / PT-VX42ZD (serv.man2) Service Manual ↓ Size: 20.46 MB | Pages: 116 in PDF or view online for FREE

Model
PT-VX42Z PT-VX42ZD (serv.man2)
Pages
116
Size
20.46 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / LCD PROJECTOR
File
pt-vx42z-pt-vx42zd-sm2.pdf
Date

Panasonic PT-VX42Z / PT-VX42ZD (serv.man2) Service Manual ▷ View online

INF-6
SECTION 1 SERVICE INFORMATION
2. Menu Navigation
Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 button
Press the <MENU> button on the remote control or the control panel.
1) 
The main menu screen appears.
 
f
Press 
2) 
as
 to select an item from the main menu.
The selected item is highlighted in yellow.
 
f
Press the <ENTER> button.
3) 
The submenu appears so that you can select the sub-menu item.
 
f
Press 
4) 
as
 to select the desired sub-menu item, press qw or the <ENTER> button to set or adjust 
settings.
Some items will switch in order as follows each time you press 
 
f
qw
.
A
B
C
 
For some items, press 
 
f
qw
 to display an individual adjustment screen with a bar scale as shown below.
ENGLISH - 45
Chapter 4   Settings - Menu Navigation
INF-7
SECTION 1 SERVICE INFORMATION
Note
Pressing the <MENU> button or <RETURN> button while the menu screen is displayed returns to the previous menu.
 
f
Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot 
 
f
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME 
LOCK] may not be displayed depending on the input signal.
Some items can be adjusted even if signals are not input.
 
f
Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.
 
f
For menu items, refer to “Main menu” (
 
f
page 
46
) and “Sub-menu” (
page 
47
).
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory 
default settings.
  
button
Press the <DEFAULT> button on the remote control.
1) 
Note
You cannot reset all the settings to the factory default at a time.
 
f
To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute [PROJECTOR SETUP] 
 
f
menu → [INITIALIZE ALL] (
 page 
72
).
Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
 
f
Main menu
The main menu consists of the following 7 menu items.
When a main menu item is selected, the screen changes to a submenu selection screen.
Main-menu item
Page
[PICTURE]
49
[POSITION]
54
[LANGUAGE]
59
[DISPLAY OPTION]
60
[PROJECTOR SETUP]
66
[SECURITY]
73
[NETWORK]
76
46 - ENGLISH
Chapter 4   Settings - Menu Navigation
INF-8
SECTION 1 SERVICE INFORMATION
Sub menu
The sub-menu screen of the selected main menu appears, and you can set and adjust the various items in the submenu.
PICTURE [ 
 ]
Sub-menu item
Factory default
Page
[PICTURE MODE]
[STANDARD]*
1
49
[CONTRAST]
[0]
49
[BRIGHTNESS]
[0]
50
[COLOR]*
2
[0]
50
[TINT]*
2
[0]
50
[SHARPNESS]
[8]
50
[COLOR TEMPERATURE]
[DEFAULT]
51
[IRIS]
[OFF]*
1
51
[ADVANCED MENU]
-
51
[DAYLIGHT VIEW]
[AUTO]
51
[DIGITAL CINEMA REALITY]
[ON]
52
[NOISE REDUCTION]
*
3
[OFF]
52
[TV-SYSTEM]
*
3
[AUTO]
52
[RGB/YP
B
P
R
]/[RGB/YC
B
C
R
]
*
4
[AUTO]
53
It will be different depending on the input signal.
*1 
Only for movie-based signals.
*2 
Only when the <S-VIDEO IN >/<VIDEO IN> terminal is selected.
*3 
Only when the <COMPUTER1 IN> / <HDMI IN> terminal is selected.
*4 
Note
The factory default settings may vary depending on the picture mode.
 
f
POSITION [ 
 ]
Sub-menu item
Factory default
Page
[REALTIME KEYSTONE]
[ON]
54
[KEYSTONE]
[0]
54
[SHIFT]
-
55
[DOT CLOCK]*
1
[0]
55
[CLOCK PHASE]*
1
[0]
56
[OVER SCAN]
-
56
[ASPECT]
-
57
[FRAME LOCK]*
1
[OFF]
58
Only for 
*1 
still image
 signals.
LANGUAGE [ 
 ]
Details (
page 
59
)
DISPLAY OPTION [ 
 ]
Sub-menu item
Factory default
Page
[ON-SCREEN DISPLAY]
-
60
[HDMI SIGNAL LEVEL]
[AUTO]
61
[CLOSED CAPTION SETTING]
-
61
[STARTUP LOGO]
[DEFAULT LOGO]
62
[AUTO SETUP SETTING]
[AUTO]
63
[SIGNAL SEARCH]
[ON]
63
[BACK COLOR]
[BLUE]
63
[WIDE MODE]
-
63
[SXGA MODE]
-
63
[P-TIMER]
-
64
[OTHER FUNCTIONS]
-
65
ENGLISH - 47
Chapter 4   Settings - Menu Navigation
INF-9
SECTION 1 SERVICE INFORMATION
PROJECTOR SETUP [ 
 ]
Sub-menu item
Factory default
Page
[STATUS]
-
66
[COMPUTER2 SELECT]
[COMPUTER2 IN]
66
[PROJECTOR ID]
[ALL]
66
[INITIAL START UP]
[LAST MEMORY]
67
[PROJECTION METHOD]
[FRONT/DESK]
67
[HIGH ALTITUDE MODE]
[OFF]
67
[LAMP POWER]
[NORMAL]
68
[ECO MANAGEMENT]
-
68
[EMULATE]
[DEFAULT]
69
[FUNCTION BUTTON]
-
70
[AUDIO SETTING]
-
70
[TEST PATTERN]
-
72
[FILTER COUNTER]
-
72
[INITIALIZE ALL]
-
72
SECURITY [ 
 ]
Sub-menu item
Factory Default
Page
[PASSWORD]
[OFF]
73
[PASSWORD CHANGE]
-
73
[TEXT DISPLAY]
[OFF]
74
[TEXT CHANGE]
-
74
[MENU LOCK]
[OFF]
74
[MENU LOCK PASSWORD]
-
74
[CONTROL DEVICE SETUP]
-
75
NETWORK [ 
 ]
Sub-menu item
Factory default
Page
[WIRED LAN]
[-]
76
[NAME CHANGE]
[-]
77
[NETWORK CONTROL]
[ON]
77
[AMX D. D.]
[OFF]
77
[Crestron Connected(TM)]
[OFF]
77
[STATUS]
[-]
78
[INITIALIZE]
[-]
78
Note
Some items may not be adjusted or used for certain signal formats to be input to the projector.
 
f
The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.
 
f
Sub-menu items and factory default settings differ depending on the selected input terminal.
 
f
48 - ENGLISH
Chapter 4   Settings - Menu Navigation
Page of 116
Display

Click on the first or last page to see other PT-VX42Z / PT-VX42ZD (serv.man2) service manuals if exist.