DOWNLOAD Panasonic PT-VW431DU / PT-VW431DE / PT-VW431DEA Service Manual ↓ Size: 20.29 MB | Pages: 127 in PDF or view online for FREE

Model
PT-VW431DU PT-VW431DE PT-VW431DEA
Pages
127
Size
20.29 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / LCD PROJECTOR
File
pt-vw431du-pt-vw431de-pt-vw431dea.pdf
Date

Panasonic PT-VW431DU / PT-VW431DE / PT-VW431DEA Service Manual ▷ View online

Model No.
 
PT-VW431DU
 
PT-VW431DE
 
PT-VW431DEA
LCD Projector
ORDER NO. VED1210448CE
D10
2012-10
-2-
Contents
Contents ....................................................................... 2
Safety Instructions ...................................................... 3
Safety precautions ...................................................... 4
Specifications .............................................................. 5
Circuit Protections ...................................................... 7
Thermal fuse (SW902) ............................................... 7
Lamp cover switch (SW901) ....................................... 7
Fuse (F601) ................................................................ 7
Warning temperature and power failure protection ..... 8
Maintenance ................................................................. 9
Maintenance ............................................................... 9
Replacing the unit ....................................................... 9
Replacing the lamp unit ............................................ 12
How to check lamp runtime ...................................... 13
Warning message on the non-standard lamp used .. 13
Cleaning ................................................................... 14
Cleaning the projection lens ..................................... 14
Cleaning the projector cabinet .................................. 14
Security Function Notice .......................................... 15
Resetting procedure ................................................. 15
Standby Mode Notice ................................................ 16
Mechanical Disassembly .......................................... 17
Mechanical disassembling flow chart ....................... 17
Optical Parts Disassembly ....................................... 30
LCD panel type check .............................................. 30
Servicing Notice ........................................................ 35
Note on the MAIN board replacement ...................... 35
1.EEPROM data transfer .......................................... 35
2. Adjustment data setting ........................................ 36
3. EDID IC replacement ............................................ 36
Adjustments ............................................................... 37
Optical Adjustments .................................................. 38
Contrast adjustment ................................................. 38
Optical center adjustment ......................................... 39
Electrical Adjustments .............................................. 40
Service adjustment menu operation ......................... 40
Circuit adjustments ................................................... 41
Test points and locations .......................................... 44
Service adjustment data  .......................................... 45
Chassis Block Diagrams........................................... 66
Chassis over view ..................................................... 66
System control .......................................................... 67
Lamp control ............................................................. 68
Audio circuit .............................................................. 69
Power supply & protection circuit ............................. 70
Fan control circuit ..................................................... 71
Troubleshooting ........................................................ 72
Indicators and projector condition ............................. 72
The projector is detecting abnormal condition .......... 72
No power .................................................................. 73
No picture ................................................................. 74
No sound .................................................................. 75
Serial Control ............................................................. 76
Serial terminal ........................................................... 76
Control Port Functions ............................................. 79
Scaler I/O port functions (PW190) ............................ 79
I/O Expander (TE7783) ............................................ 81
IC Block Diagrams ..................................................... 82
Exploded Views & Parts List ..............................SPL-1
Exploded Views ...................................................SPL-2
Mechanical Parts List ........................................SPL-10
Electrical Parts List ...........................................SPL-12
Schematic Diagram & Circuit Boards Diagram .DIA-1
Pin description of diode, transistor and IC ...........DIA-2
Schematic Diagrams ............................................DIA-3
Printed Wiring Board Diagrams ........................DIA-11
-3-
Safety Instructions
The service technician is required to read and follow the “Safety Precautions” and “Important Safety Notice” in this service manual.
CAUTION
Precaution
When using the projector in the elevation of below 1 200 m, make sure [Fan control] is set to [Off].
When using the projector in the elevation of above 1 200 m to below 2 000 m, make sure [Fan control] is set to [On 1].
When using the projector in the elevation of above 2 000 m to below 2 700 m, make sure [Fan control] is set to [On 2].
    About lead free solder (PbF)
WARNING
  This service information is designed for experienced repair technicians only and is not designed for use by the general public.
  It dose not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. 
  Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service.
  or repair the product or products dealt with in this service information by anyone else could result in serious injury or death.
WARNING : Use UV radiation eye and skin protection during servicing
(Refer to “PROJECTOR SETUP menu” in Operating Instructions.)
Failure to observe this may cause malfunctions. Never use this projector at an altitude of 2 700 m or higher above sea level.
Using this projector at high altitude, consult your dealer or Authorized Service Center about preparations.
This projector is using the P.C.Board which applies lead free solder.
Use lead free solder in servicing from the standpoint of antipollution for the global environment.
Notes:
 Lead free solder: Sn-Ag-Cu (tin, silver and copper) has a higher melting point (approx. 217°C) than standard solder. 
 Typically the melting point is 30~40 °C higher. When servicing, use a high temperature soldering iron with temperature
 limitation function and set it to 370 ± 10°C .
 Be precautious about lead free solder. Sn-Ag-Cu (tin, silver and copper) will tend to splash when heated too high.
 (approx. 600 °C or higher)
 Use lead free solder for the P.C.Board (specified on it as “PbF”) which uses lead free solder。(When you unavoidably use  
 lead solder, use lead solder after removing lead free solder. or be sure to heat the lead free solder until it melts completely, 
 before applying lead solder.)
For US
WARNING:
CAUTION : 
Any unauthorized changes or modifications to this equipment will void the users authority to operate.
 There are special parts used in panasonic LCD projectors which are important for safety. These parts are shaded on the schematic
 diagram. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire, or other
 hazards. Do not modify the original design without permission of PANASONIC SOLUTIONS COMPANY.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, The user is encouraged to try to correct the interference by one or more of the following measures.
  - Reorient or relocate the receiving antenna.
  - Increase the separation between the equipment and receiver.
  - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  - Consult the dealer or an experienced radio/TV technician for help.
 After soldering to double layered P.C.Boards, check the component side for excess solder which may flow onto the opposite side.
.
About the identification of the lead free solder P.C.Board
  For the P.C.Board which applies lead free solder, the symbol as shown in the figure below is printed or stamped on the surface
  or the back of P.C.Board.
IMPORTANT SAFETY NOTICE
-4-
Safety Instructions
1. Safety Precautions
  1.1. General Guidelines
  1.2. Leakage Current Check
1. Prepare the measuring circuit as shown in Fig.1.
    Be sure to use a voltmeter having the performance described in Table 1.
2. Assemble the circuit as shown in Fig. 2. Plug the power cord in a power outlet.
3. Connect M1 to T1 according to Fig. 2 and measure the voltage.
4. Change the connection of M1 from T1 to T2 and measure the voltage again.
5. The voltmeter must read 0.375 V or lower in both of steps 3 and 4.(This means that the current must be 0.75mA or less)
6. If the reading is out of the above standard, the projector must be repaired and rechecked before returning to the customer
    because of a possibility of an electric shock.
- For continued safety, no modification of any circuit must be attempted.
- Unplug the power cord from the power outlet before disassembling this projector.
- Use correctly the supplied power cord and must ground it.
- It is advisable to use an isolation transformer in the AC power line before the service.
- Be careful not to touch the rotation part (cooling fan, etc.) of this projector when you service with the upper
  case removed and the power supply turned ON.
- Observe the original lead dress during the service. If a short circuit is found, replace all the parts overheated
  or damaged by the short circuit.
- After the service, all the protective devices such as insulation barriers, insulation papers, shields, and isolation
  R-C combinations must be properly installed.
- After the service, check the leakage current to prevent the customer from getting an electric shock.
4
  1.3. UV Precaution and UHM Lamp Precautions
- Be sure to unplug the power cord from the power outlet when replacing the lamp.
- Because the lamp reaches a very high temperature during its operation, wait until it cools completely when replacing
  the Lamp Unit.
- The lamp emits small amounts of UV-radiation, avoid direct-eye contact with the light.
- The lamp unit has high internal pressure. If improperly handled, explosion might result.
- Because the high pressure lamp involves a risk of failure, never touch the lamp wire lead during the service.
Fig. 1
Fig. 2
Table. 2
Safety precautions
Page of 127
Display

Panasonic PT-VW431DU / PT-VW431DE / PT-VW431DEA Service Manual ▷ Download

  • DOWNLOAD Panasonic PT-VW431DU / PT-VW431DE / PT-VW431DEA Service Manual ↓ Size: 20.29 MB | Pages: 127 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Panasonic PT-VW431DU / PT-VW431DE / PT-VW431DEA in PDF for free, which will help you to disassemble, recover, fix and repair Panasonic PT-VW431DU / PT-VW431DE / PT-VW431DEA Projector. Information contained in Panasonic PT-VW431DU / PT-VW431DE / PT-VW431DEA Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.