Panasonic PT-VW345NZ / PT-VW345NZD / PT-VX415NZ / PT-VX415NZD Service Manual ▷ View online
INF-1
CONTENTS
Service Information
Model No. PT-VW345NZ
PT-VX415NZ
SECTION 1 SERVICE INFORMATION
(2013-11)
SECTION 1 SERVICE INFORMATION
1. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-2
1.1 Projector body
1.2 Control panel / Indicators
1.3 Connecting terminals
1.4 Remote controls
1.2 Control panel / Indicators
1.3 Connecting terminals
1.4 Remote controls
2. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-6
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-10
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-10
3. 1. Setting to Service Mode
3. 2. Cancelling the Service Mode
3. 3. Functions of Service Mode
3. 2. Cancelling the Service Mode
3. 3. Functions of Service Mode
4. External Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-13
4. 1. Control through Serial terminal
4. 2. Control through LAN terminal
4. 3. Control commands List
4. 2. Control through LAN terminal
4. 3. Control commands List
5. Notes on service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-18
5. 1. Before service operation
5. 2. Service
5. 3. Replacement of consumable parts
5. 2. Service
5. 3. Replacement of consumable parts
6. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-23
6. 1. Shutdown system
6. 2. Troubleshooting
6. 2. Troubleshooting
INF-2
SECTION 1 SERVICE INFORMATION
1. The name of each part
1.1 Projector body
Zoom ring (Back)
1
Adjust the zoom.
Control Panel and Indicators (
Control Panel and Indicators (
2
Æ
page 27)
Lamp cover (
3
Æ
page 118)
The lamp unit is located inside.
Projection Lens
Projection Lens
4
Attention
Do not drop the remote control.
f
Avoid contact with liquids.
f
Do not attempt to modify or disassemble the remote control.
f
Please observe the following contents that are described on
f
the back of the remote control unit (see the right picture).
1. Do not use a new battery together with an old battery.
2. Do not use unspecified batteries.
3. Make sure the polarities (+ and -) are correct when inserting the batteries.
In addition, please read the contents that are related to batteries in the "Read this first!".
f
Note
The remote control can be used within a distance of about 7 m (22.97') if pointed directly at the remote control signal
f
receiver. The remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective control
range may be reduced.
If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not
f
operate correctly.
You can operate the projector by reflecting the remote control signal on the screen. The operating range may differ due to
f
the loss of light caused by the properties of the screen.
When the remote control signal receiver is lit with a fluorescent light or other strong light source, the projector may become
f
inoperative. Set the projector as far from the luminous source as possible.
Projector body
WARNING
Keep your hands and other objects away from the air
exhaust port.
Keep your hand and face away.
f
Do not insert your finger.
f
Keep heat-sensitive articles away.
f
Heated air from the air exhaust port can cause burns or
Heated air from the air exhaust port can cause burns or
external damage.
Focus ring (Front)
5
Adjust the focus.
Remote control signal receiver/Camera
Remote control signal receiver/Camera
6
Air exhaust port
7
Speaker
8
<AC IN> terminal
9
Connect the supplied power cord.
Rear terminals (
Rear terminals (
10
Æ
page 28)
Air intake port / Air filter cover (
11
Æ
page 116)
The air filter unit is inside.
Adjustable feet
Adjustable feet
12
Adjust the projection angle.
Security Chain Hook
Security Chain Hook
13
Attaches a burglar prevention cable, etc.
Attention
Do not block the ventilation ports (intake and exhaust) of the projector.
f
1
2
3
4
6
7
8
9
10
11
12
5
13
1. 请勿把旧电池和新电池一起使用。
2. 请勿使用不合规格的电池。
3. 确保电池安装正确。
原产地：中国
1.Do not use old battery with new one.
2.Do not use batteries other than the
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
3.Be sure the batteries are inserted properly.
Made in China
26 - ENGLISH
Chapter 1 Preparation - About your projector
Some of the pages on this section are excerpted from the owner's
manual, thus the reference page numbers on pages indicate those
for owner's manual .
INF-3
SECTION 1 SERVICE INFORMATION
1.2 Control panel / Indicators
Control panel and Indicators
r
<
1 v/b> button
Turns the projector on/off.
<ON(G)/STANDBY(R)> indicator
<ON(G)/STANDBY(R)> indicator
2
Displays the status of the power.
<LAMP> indicator
<LAMP> indicator
3
Lights red when the projection lamp reaches its end of
life.
<WARNING> indicator
<WARNING> indicator
4
Indicates the abnormal conditions of the projector.
Ambient Luminance sensor
Ambient Luminance sensor
5
Detects room's light and select proper image quality.
<MENU> button
<MENU> button
6
Displays the menu screen. (
Æ
page 54)
<ENTER> button
7
Executes the selected item.
asqw
asqw
8
buttons
Navigates the menu screen.
Adjusts the volume level (qw).
<INPUT SELECT> button
<INPUT SELECT> button
9
Selects the input signal for projection. (
Æ
page 48)
<EASY SETTING/CANCEL> button
10
Executes the EASY SETTING function.
In addition, it acts as <CANCEL> button when using the
MEMORY VIEWER function.
1
2
3
4
5
6
7
8
9
10
ENGLISH - 27
Chapter 1 Preparation - About your projector
INF-4
SECTION 1 SERVICE INFORMATION
1.3 Connecting terminals
Rear terminals
r
Attention
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
f
<COMPUTER 1 IN> terminal
1
This is the terminal to input RGB or YP
B
P
R
/YC
B
C
R
signals.
<COMPUTER 2 IN/
<COMPUTER 2 IN/
2
1 OUT> terminal
This is the terminal to input RGB signals or output the
RGB/YC
B
C
R
/YP
B
P
R
signals to external monitor.
<HDMI IN> terminal
3
This is the terminal to input HDMI signals.
<USB B (DISPLAY)> terminal
<USB B (DISPLAY)> terminal
4
This terminal is used to connect the projector to the
computer with a USB cable when you want to use
the "USB diaplay" function of the application software
"Wireless Manager ME6.0".
For details, please refer to the "Operating Instructions-
Wireless Manager ME6.0" in CD-ROM.
<USB A (VIEWER)> terminal
<USB A (VIEWER)> terminal
5
This terminal is to insert the USB memory directly.
<LAN> terminal
<LAN> terminal
6
This is the LAN terminal to connect to the network.
<SERIAL IN> terminal
7
This is the RS-232C compatible terminal to externally
control the projector by connecting a computer.
<VIDEO IN> terminal
<VIDEO IN> terminal
8
This is the terminal to input video signals.
<AUDIO IN 3 (L/R)> terminal
<AUDIO IN 3 (L/R)> terminal
9
This is the terminal to input audio signals.
There are a left (L) terminal and a right (R) terminal.
<AUDIO IN 1> terminal
<AUDIO IN 1> terminal
10
This is the terminal to input audio signals.
<AUDIO IN 2 (MIC IN)> terminal
<AUDIO IN 2 (MIC IN)> terminal
11
This is the terminal to input audio signals. Or connect the
MIC to this terminal.
<VARIABLE AUDIO OUT> terminal
<VARIABLE AUDIO OUT> terminal
12
This is the terminal to output audio signals input to the
projector.
<S-VIDEO IN> terminal
<S-VIDEO IN> terminal
13
This is the terminal to input s-video signals.
Security slot
Security slot
14
Attach the commercial shackle lock, manufactured by
Kensington, to protect your projector. Compatible with
the Kensington MicroSaver Security System.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
28 - ENGLISH
Chapter 1 Preparation - About your projector
Click on the first or last page to see other PT-VW345NZ / PT-VW345NZD / PT-VX415NZ / PT-VX415NZD service manuals if exist.