DOWNLOAD Panasonic PT-VW345NZ / PT-VW345NZD / PT-VX415NZ / PT-VX415NZD Service Manual ↓ Size: 20.02 MB | Pages: 127 in PDF or view online for FREE

5

AC100 V - 240 V, 50 Hz/60 Hz

100 V - 240 V, 3.5 A-1.3 A, 300 W
When [STANDBY MODE] of [PROJECTOR SETUP] is set to [ECO]: 0.4 W
When [STANDBY MODE] of [PROJECTOR SETUP] is set to [NORMAL]: 14 W 

1.5 cm (0.59")
(aspect ratio 16 : 10)

1.6 cm (0.63")
(aspect ratio 4 : 3)

3 transparent LCD panels (RGB)

Active matrix method

1 024 000
(1 280 x 800) x 3 panels

786 432
(1 024 x 768) x 3 panels

Manual zoom : 1.6x / Manual focus : F 1.6 to 2.12, f 15.30 mm to 24.64 mm

230 W UHM lamp 

3 700 lm 

4 200 lm

3 000 : 1 (all white / all black)
([LAMP POWER] is set to [NORMAL], 
meanwhile [IRIS] is set to [ON])

4 000 : 1 (all white / all black)
([LAMP POWER] is set to [NORMAL],  
meanwhile [IRIS] is set to [ON])

Horizontal 15.75 kHz / 15.63 kHz, Vertical 60 Hz / 50 Hz

Horizontal 15 kHz to 100 kHz, Vertical 50 Hz to 100 Hz
Dot clock frequency: 140 MHz or less

[525i(480i)] 

Horizontal 15.75 kHz, Vertical 60 Hz

[525p(480p)] 

Horizontal 31.50 kHz, Vertical 60 Hz

[750(720)/60p] 

Horizontal 45.00 kHz, Vertical 60 Hz

[1125(1080)/60i]  Horizontal 33.75 kHz, Vertical 60 Hz
[625i(576i)] 

Horizontal 15.63 kHz, Vertical 50 Hz

[625p(576p)] 

Horizontal 31.25 kHz, Vertical 50 Hz

[750(720)/50p] 

Horizontal 37.50 kHz, Vertical 50 Hz

[1125(1080)50i] 

Horizontal 28.13 kHz, Vertical 50 Hz

HD/SYNC and V terminals are not compliant with 3 value composite SYNC

525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/24p, 1125(1080)/24sF, 
1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i
Displayable resolution: VGA to WUXGA (non-interlace)
Dot clock frequency: up to 162 MHz

7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)

0.76 m -7.62 m (30"-300")

16 : 10

4 : 3

[FRONT/DESK], [FRONT/CEILING], [REAR/DESK], [REAR/CEILING] (Menu setting system)

1 (4.0 cm round-type)

10 W

*1  These values of light output are measured under the condition that [LAMP POWER] is set to [NORMAL], [PICTURE 

MODE] is set to [DYNAMIC]. Measurement, measuring conditions and method of notation all comply with ISO21118 
international standards.

*2  The value of contrast ratio is measured under the condition that [LAMP POWER] is set to [NORMAL], [PICTURE MODE] 

is set to [DYNAMIC] and [IRIS] is set to [ON]. Measurement, measuring conditions and method of notation all comply with 
ISO21118 international standards. 

*3  For details of video signals that can be projected using this projector, refer to “List of compatible signals”.  

(

Æ

pages 130-131)

132 - ENGLISH

6

1 (High-density D-sub 15 pin female)

[RGB signal] 

0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)

 

HD/SYNC TTL high impedance, automatic positive/negative polarity compatible

 

VD TTL high impedance, automatic positive/negative polarity compatible

[YP

B

P

R

 signal]  Y: 1.0 V [p-p] including synchronization signal, P

B

P

R

: 0.7 V [p-p] 75 Ω

1 (High-density D-sub 15 pin female)

[RGB signal] 

0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)

 

HD/SYNC TTL high impedance, automatic positive/negative polarity compatible

 

VD TTL high impedance, automatic positive/negative polarity compatible

1 (Pin jack 1.0 V [p-p] 75 Ω)

1 (Mini DIN 4 pin, Y 1.0 V [p-p], C 0.286 V [p-p] 75 Ω, S1 signal compatible)

1 (HDMI 19 pin, HDCP and Deep color compatible)

Audio signals: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)

2 (M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more)

(<AUDIO IN 2 (MIC IN)> terminal support MIC input)

1 (Pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ and more)

1 (M3 stereo mini jack, stereo monitor output compatible,

0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less)

<USB A/VIEWER> USB connector (type A x 1)
<USB B/DISPLAY> USB connector (type B x 1)
<SERIAL IN>

1 (D-sub 9 pin, RS-232C compliant, for computer control use)

1 (for RJ-45 network connection, PJLink compatible,)

IEEE 802.11a/n : 5.180 GHz - 5.850 GHz

IEEE 802.11b/g/n : 2.412 GHz - 2.472 GHz

For Europe, U.K. and USA: 2.0 m (78 3/4") 

For India: 3.0 m (118 1/8")

Molded plastic

Width: 352 mm (13.86")

Height: 98 mm (3.86") (when adjustable feet shortened)

Depth: 279.4 mm (11") 

Approx.3.4 kg (7.5 lbs.) *

4

When set to [NORMAL] in [LAMP POWER] : 35 dB

When set to [ECO1] or [ECO2] in [LAMP POWER] : 29 dB

Operating environment temperature *

6

:

0 °C (32 °F) to 40 °C (104 °F) 

 (Elevation: below 1 400 m; [HIGH ALTITUDE MODE]: [OFF])

0 °C (32 °F) to 30 °C (86 °F)  

(Elevation: 1 400 m ~ 2 000 m; [HIGH ALTITUDE MODE]: [HIGH1])

0 °C (32 °F) to 30 °C (86 °F) 

 (Elevation: 2 000 m ~ 2 700 m; [HIGH ALTITUDE MODE]: [HIGH2])

Operating environment humidity: 10 % to 80 % (no condensation)

DC 3 V (battery (AAA/R03 or AAA/LR03 Type ) x 2)

Operating range Approx. 7 m (275.6") (when operated directly in front of receptor)
Weight

102 g (3.60 ozs.) (including batteries)

Width : 48 mm (1.89"), Length : 145 mm (5.71"), Height : 27 mm (1.06")

*4  This is an average value. It may differ depending on individual product.

*5  Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.

*6  [LAMP POWER] will be switched to [ECO1] automatically when the operating environment temperature is 35 °C to 40 °C.

 

f

The part numbers of accessories and separately sold components are subject to change without notice.

ENGLISH - 133

INF-1

(2013-11)

1.1 Projector body
1.2 Control panel / Indicators
1.3 Connecting terminals
1.4 Remote controls

2. Menu Navigation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-6
3. Service Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-10

4. 1. Control through Serial terminal
4. 2. Control through LAN terminal
4. 3. Control commands List

5. 1. Before service operation
5. 2. Service
5. 3. Replacement of consumable parts

6. 1. Shutdown system
6. 2. Troubleshooting

INF-2

Adjust the zoom.
Control Panel and Indicators (

Æ

 

Æ

 

The lamp unit is located inside.
Projection Lens 

Do not drop the remote control.

 

f

Avoid contact with liquids.

 

f

Do not attempt to modify or disassemble the remote control.

 

f

Please observe the following contents that are described on  

 

f

the back of the remote control unit (see the right picture). 

1. Do not use a new battery together with an old battery. 

2. Do not use unspecified batteries. 

3. Make sure the polarities (+ and -) are correct when inserting the batteries.

In addition, please read the contents that are related to batteries in the "Read this first!".

 

f

The remote control can be used within a distance of about 7 m (22.97') if pointed directly at the remote control signal 

 

f

receiver. The remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective control 

range may be reduced.

If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not 

 

f

operate correctly.

You can operate the projector by reflecting the remote control signal on the screen. The operating range may differ due to 

 

f

the loss of light caused by the properties of the screen.

When the remote control signal receiver is lit with a fluorescent light or other strong light source, the projector may become 

 

f

inoperative. Set the projector as far from the luminous source as possible.

Keep your hand and face away.

 

f

Do not insert your finger.

 

f

Keep heat-sensitive articles away.

 

f
Heated air from the air exhaust port can cause burns or 

external damage.

Adjust the focus.
Remote control signal receiver/Camera

 

Connect the supplied power cord.
Rear terminals (

Æ

 

Æ

 

The air filter unit is inside.
Adjustable feet

Adjust the projection angle.
Security Chain Hook 

Attaches a burglar prevention cable, etc.

Do not block the ventilation ports (intake and exhaust) of the projector.

 

f

1

2

3

4

6

7

8

9

10

11

12

5

13

1. 请勿把旧电池和新电池一起使用。

2. 请勿使用不合规格的电池。

3. 确保电池安装正确。

原产地：中国

1.Do not use old battery with new one.
2.Do not use batteries other than the

   type specified.
3.Be sure the batteries are inserted properly.

Made in China

26 - ENGLISH

Some of the pages on this section are excerpted from the owner's 

manual, thus the reference page numbers on pages indicate those 

for owner's manual .