Panasonic PT-VW340Z / PT-VW340ZD / PT-VX410Z / PT-VX410ZD / PT-VX46EA / PT-VX406EA Service Manual ▷ View online
INF-3
SECTION 1 SERVICE INFORMATION
1.2 Control panel / Indicators
Control panel and Indicators
r
r
Rear terminals
Attention
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
f
<COMPUTER 1 IN> terminal
1
This is the terminal to input RGB or YP
B
P
R
/YC
B
C
R
signals.
<COMPUTER 2 IN/
2
1 OUT> terminal
This is the terminal to input RGB signals or output
the RGB/YC
B
C
R
/YP
B
P
R
signals to external monitor.
<HDMI IN> terminal
3
This is the terminal to input HDMI signals.
<LAN> terminal
4
This is the LAN terminal to connect to the network.
<SERIAL IN> terminal
5
This is the RS-232C compatible terminal to
externally control the projector by connecting a
computer.
<VIDEO IN> terminal
6
This is the terminal to input video signals.
<AUDIO IN 3 (L/R)> terminal
7
This is the terminal to input audio signals.
There are a left (L) terminal and a right (R)
terminal.
<AUDIO IN 1> terminal
8
This is the terminal to input audio signals.
<AUDIO IN 2 (MIC IN)> terminal
9
This is the terminal to input audio signals. Or
connect the MIC to this terminal.
<VARIABLE AUDIO OUT> terminal
10
This is the terminal to output audio signals input to
the projector.
<S-VIDEO IN> terminal
11
This is the terminal to input s-video signals.
Security slot
12
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector.
Compatible with the Kensington MicroSaver
Security System.
<
1 v/b> button
Turns the projector on/off.
<ON(G)/STANDBY(R)> indicator
2
Displays the status of the power.
<LAMP> indicator
3
Lights
red w
hen the projection lamp reaches its
end of life.
<WARNING> indicator
4
Indicates the abnormal conditions of the projector.
Ambient Luminance sensor
5
Detects room's light and select proper image
quality.
<MENU> button
6
Displays the menu screen. (
page 45)
<ENTER> button
7
Executes the selected item.
asqw
asqw
8
buttons
Navigate the MENU screen.
Adjust the volume level (qw
).
<INPUT SELEC
9
T> button
Select the input signal for projection. (
page 38)
<AUTO SETUP> button
10
Executes the auto setup function.
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
22 - ENGLISH
Chapter 1 Preparation - About your projector
INF-4
SECTION 1 SERVICE INFORMATION
1.3 Connecting terminals
Control panel and Indicators
r
r
Rear terminals
Attention
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
f
<COMPUTER 1 IN> terminal
1
This is the terminal to input RGB or YP
B
P
R
/YC
B
C
R
signals.
<COMPUTER 2 IN/
2
1 OUT> terminal
This is the terminal to input RGB signals or output
the RGB/YC
B
C
R
/YP
B
P
R
signals to external monitor.
<HDMI IN> terminal
3
This is the terminal to input HDMI signals.
<LAN> terminal
4
This is the LAN terminal to connect to the network.
<SERIAL IN> terminal
5
This is the RS-232C compatible terminal to
externally control the projector by connecting a
computer.
<VIDEO IN> terminal
6
This is the terminal to input video signals.
<AUDIO IN 3 (L/R)> terminal
7
This is the terminal to input audio signals.
There are a left (L) terminal and a right (R)
terminal.
<AUDIO IN 1> terminal
8
This is the terminal to input audio signals.
<AUDIO IN 2 (MIC IN)> terminal
9
This is the terminal to input audio signals. Or
connect the MIC to this terminal.
<VARIABLE AUDIO OUT> terminal
10
This is the terminal to output audio signals input to
the projector.
<S-VIDEO IN> terminal
11
This is the terminal to input s-video signals.
Security slot
12
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector.
Compatible with the Kensington MicroSaver
Security System.
<
1 v/b> button
Turns the projector on/off.
<ON(G)/STANDBY(R)> indicator
2
Displays the status of the power.
<LAMP> indicator
3
Lights
red w
hen the projection lamp reaches its
end of life.
<WARNING> indicator
4
Indicates the abnormal conditions of the projector.
Ambient Luminance sensor
5
Detects room's light and select proper image
quality.
<MENU> button
6
Displays the menu screen. (
page 45)
<ENTER> button
7
Executes the selected item.
asqw
asqw
8
buttons
Navigate the MENU screen.
Adjust the volume level (qw
).
<INPUT SELEC
9
T> button
Select the input signal for projection. (
page 38)
<AUTO SETUP> button
10
Executes the auto setup function.
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
22 - ENGLISH
Chapter 1 Preparation - About your projector
INF-5
SECTION 1 SERVICE INFORMATION
1.4 Remote controls
About your projector
Remote control
Attention
Do not drop the remote control.
f
Avoid contact with liquids.
f
Do not attempt to modify or disassemble the remote control.
f
<
1 v/b> Button
Turn the projector on or off. (
pages 36,37)
Input Selection Buttons: <COMPUTER 1>,
2
<COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>.
These buttons are used to select the input signal.
(
page 40)
asqw
3
Buttons, <ENTER> Button
Navigate the MENU display.
<DEFAULT> Button
<DEFAULT> Button
4
Resets the content of the sub-menu to the factory default.
(
(
page 46)
<MENU> Button
5
Open or close the On-Screen Menu. (
page 45)
<ID SET> Button
6
Sets the ID number of the remote control to use for a
system using multiple projectors.
<FREEZE> Button
<FREEZE> Button
7
Pauses the projected image and mute the audio
temporarily. (
page 40)
<D.ZOOM +/–> Buttons
8
Zoom in and out the images. (
page 41)
<VOL +/–> Buttons
9
Adjust the volume of the speaker. (
page 42)
<KEYSTONE> Button
10
Correct keystone distortion. (
page 39)
<P IN P> Button (
11
Only for PT-VW340Z
)
Operate the P IN P function.
<AV MUTE> Button
<AV MUTE> Button
12
Used to turn off the audio and video temporarily.
(
page 41)
<P-TIMER> Button
13
Operate the P-timer function. (
page 41)
<MUTE> Button
14
Used to mute the audio. (
page 42)
<ID ALL> Button
15
Used to simultaneously control all the projectors with
one remote control for a system using multiple projectors.
<RETURN> Button
<RETURN> Button
16
Return to the previous menu or cancel the setting.
<FUNCTION> Button
<FUNCTION> Button
17
Assigns a frequently used operation as a shortcut button.
<AUTO SETUP> Button
<AUTO SETUP> Button
18
Automatically adjusts the image display position while
projecting the image. (
projecting the image. (
page 39)
Remote control signal emitter
19
1
2
3
5
7
8
9
4
6
10
11
12
13
14
15
16
17
18
19
20 - ENGLISH
Chapter 1 Preparation - About your projector
INF-6
SECTION 1 SERVICE INFORMATION
2. Menu Navigation
Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
button
Press the <MENU> button
1)
on the remote control or the control panel.
The main menu screen appears.
f
Press
2)
as
to select an item from the main menu.
The selected item is highlighted in yellow.
f
Press the <ENTER> button.
3)
The submenu is displayed, and submenu items become selectable.
f
Press
4)
as
to select the desired sub-menu item, press qw or
the
<ENTER> button to set or adjust
settings.
Some items will switch in order as follows each time you press
f
qw
.
A
B
C
For some items, press
f
qw
to display an individual adjustment screen with a bar scale as shown below.
ENGLISH - 45
Chapter 4 Settings - Menu Navigation
Click on the first or last page to see other PT-VW340Z / PT-VW340ZD / PT-VX410Z / PT-VX410ZD / PT-VX46EA / PT-VX406EA service manuals if exist.