Panasonic PT-VW340Z / PT-VW340ZD / PT-VX410Z / PT-VX410ZD / PT-VX46EA / PT-VX406EA Service Manual ▷ View online
INF-5
SECTION 1 SERVICE INFORMATION
1.4 Remote controls
About your projector
Remote control
Attention
Do not drop the remote control.
f
Avoid contact with liquids.
f
Do not attempt to modify or disassemble the remote control.
f
<
1 v/b> Button
Turn the projector on or off. (
pages 36,37)
Input Selection Buttons: <COMPUTER 1>,
2
<COMPUTER 2>, <HDMI>, <VIDEO>, <S-VIDEO>.
These buttons are used to select the input signal.
(
page 40)
asqw
3
Buttons, <ENTER> Button
Navigate the MENU display.
<DEFAULT> Button
<DEFAULT> Button
4
Resets the content of the sub-menu to the factory default.
(
(
page 46)
<MENU> Button
5
Open or close the On-Screen Menu. (
page 45)
<ID SET> Button
6
Sets the ID number of the remote control to use for a
system using multiple projectors.
<FREEZE> Button
<FREEZE> Button
7
Pauses the projected image and mute the audio
temporarily. (
page 40)
<D.ZOOM +/–> Buttons
8
Zoom in and out the images. (
page 41)
<VOL +/–> Buttons
9
Adjust the volume of the speaker. (
page 42)
<KEYSTONE> Button
10
Correct keystone distortion. (
page 39)
<P IN P> Button (
11
Only for PT-VW340Z
)
Operate the P IN P function.
<AV MUTE> Button
<AV MUTE> Button
12
Used to turn off the audio and video temporarily.
(
page 41)
<P-TIMER> Button
13
Operate the P-timer function. (
page 41)
<MUTE> Button
14
Used to mute the audio. (
page 42)
<ID ALL> Button
15
Used to simultaneously control all the projectors with
one remote control for a system using multiple projectors.
<RETURN> Button
<RETURN> Button
16
Return to the previous menu or cancel the setting.
<FUNCTION> Button
<FUNCTION> Button
17
Assigns a frequently used operation as a shortcut button.
<AUTO SETUP> Button
<AUTO SETUP> Button
18
Automatically adjusts the image display position while
projecting the image. (
projecting the image. (
page 39)
Remote control signal emitter
19
1
2
3
5
7
8
9
4
6
10
11
12
13
14
15
16
17
18
19
20 - ENGLISH
Chapter 1 Preparation - About your projector
INF-6
SECTION 1 SERVICE INFORMATION
2. Menu Navigation
Menu Navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
button
Press the <MENU> button
1)
on the remote control or the control panel.
The main menu screen appears.
f
Press
2)
as
to select an item from the main menu.
The selected item is highlighted in yellow.
f
Press the <ENTER> button.
3)
The submenu is displayed, and submenu items become selectable.
f
Press
4)
as
to select the desired sub-menu item, press qw or
the
<ENTER> button to set or adjust
settings.
Some items will switch in order as follows each time you press
f
qw
.
A
B
C
For some items, press
f
qw
to display an individual adjustment screen with a bar scale as shown below.
ENGLISH - 45
Chapter 4 Settings - Menu Navigation
INF-7
SECTION 1 SERVICE INFORMATION
Note
Pressing the <MENU> button or <RETURN> button while the menu screen is displayed returns to the previous menu.
f
Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot
f
be adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME
LOCK] may not be displayed depending on the input signal.
Some items can be adjusted even if signals are not input.
f
Individual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.
f
For menu items, refer to “Main menu” (
f
page
46
) and “Sub-menu” (
page
47
).
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to the factory
default settings.
button
Press the <DEFAULT> button on the remote control.
1)
Note
You cannot reset all the settings to the factory default at a time.
f
To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute [PROJECTOR SETUP]
f
menu → [INITIALIZE ALL] (
page
72
).
Some items cannot be reset by pressing the <DEFAULT> button. Adjust each item manually.
f
Main menu
The main menu consists of the following 7 menu items.
When a main menu item is selected, the screen changes to a submenu selection screen.
Main-menu item
Page
[PICTURE]
49
[POSITION]
54
[LANGUAGE]
59
[DISPLAY OPTION]
60
[PROJECTOR SETUP]
66
[SECURITY]
73
[NETWORK]
76
46 - ENGLISH
Chapter 4 Settings - Menu Navigation
INF-8
SECTION 1 SERVICE INFORMATION
Sub menu
The sub-menu screen of the selected main menu appears, and you can set and adjust the various items in the submenu.
PICTURE [
]
Sub-menu item
Factory default
Page
[PICTURE MODE]
[STANDARD]*
1
49
[CONTRAST]
[0]
49
[BRIGHTNESS]
[0]
50
[COLOR]*
2
[0]
50
[TINT]*
2
[0]
50
[SHARPNESS]
[8]
50
[COLOR TEMPERATURE]
[DEFAULT]
51
[IRIS]
[OFF]*
1
51
[ADVANCED MENU]
-
51
[DAYLIGHT VIEW]
[AUTO]
51
[DIGITAL CINEMA REALITY]
[ON]
52
[NOISE REDUCTION]
*
3
[OFF]
52
[TV-SYSTEM]
*
3
[AUTO]
52
[RGB/YP
B
P
R
]/[RGB/YC
B
C
R
]*
4
[AUTO]
53
It may be different depending on the input signal.
*1
Only for movie-based signals.
*2
Only when the <S-VIDEO IN >/<VIDEO IN> terminal is selected.
*3
Only when the <COMPUTER 1 IN >/<HDMI IN> terminal is selected.
*4
Note
The factory default settings may vary depending on the picture mode.
f
POSITION [
]
Sub-menu item
Factory default
Page
[REALTIME KEYSTONE]
[ON]
54
[KEYSTONE]
-
54
[SHIFT]
-
56
[DOT CLOCK]*
1
[0]
56
[CLOCK PHASE]*
1
[0]
56
[OVER SCAN]
-
57
[ASPECT]
-
57
[FRAME LOCK]*
1
[OFF]
58
Only for still image signals.
*1
LANGUAGE [
]
Details (
page
59
)
DISPLAY OPTION [
]
Sub-menu item
Factory default
Page
[ON-SCREEN DISPLAY]
-
60
[HDMI SIGNAL LEVEL]
[AUTO]
61
[CLOSED CAPTION SETTING]
-
61
[SCREEN SETTING]*
1
-
62
[STARTUP LOGO]
[DEFAULT LOGO]
62
[AUTO SETUP SETTING]
[AUTO]
63
[SIGNAL SEARCH]
[ON]
63
[BACK COLOR]
[BLUE]
63
[WIDE MODE]
-
63
[SXGA MODE]
-
63
[P-TIMER]
-
64
[P IN P]*
1
-
65
[OTHER FUNCTIONS]
-
65
Only for PT-VW340Z.
*1
ENGLISH - 47
Chapter 4 Settings - Menu Navigation
Click on the first or last page to see other PT-VW340Z / PT-VW340ZD / PT-VX410Z / PT-VX410ZD / PT-VX46EA / PT-VX406EA service manuals if exist.