DOWNLOAD Panasonic PT-TX301RU / PT-TX301RE / PT-TX301REA / PT-TW331RU / PT-TW331RE / PT-TW331REA (serv.man2) Service Manual ↓ Size: 10.85 MB | Pages: 92 in PDF or view online for FREE

Model
PT-TX301RU PT-TX301RE PT-TX301REA PT-TW331RU PT-TW331RE PT-TW331REA (serv.man2)
Pages
92
Size
10.85 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / DLP BASED PROJECTOR
File
pt-tx301ru-pt-tx301re-pt-tx301rea-pt-tw331ru-pt-tw.pdf
Date

Panasonic PT-TX301RU / PT-TX301RE / PT-TX301REA / PT-TW331RU / PT-TW331RE / PT-TW331REA (serv.man2) Service Manual ▷ View online

PT-TW331R / PT-TX301R series
2-3
2-3  Disassemble Filter and 
Focus Ring
1. Pull down the tenon(as red square) to  
disassemble the Left Filter.
2. Pull down the tenon(as yellow square)  
    to disassemble the Right Filter.
3. Disassembled the Left Filter and the  
     Right Filter.
The Left Filter
The Right Filter
5.  Rotate the Focus Ring to move outward 
so as to take out the focus ring easily.
6. Pull out the Focus Ring.
    Note: - When you assemble the Focus   
                Ring, ensure the 3 card slot (as  
                green square) placed in the 3  
                double-screw bolt (as red circle)  
                properly, and the Focus Ring can  
                be well adjusted.
Focus Ring
PT-TW331R / PT-TX301R series
2-4
Lamp Cover
Lamp Module
3. Loosen 2 screws (as yellow circle) on the
Lamp Module.
4. Take off the Lamp Module.
2-4  Disassemble Lamp 
Module
1. Loosen 1 screw(as red circle) on the  
Lamp Cover.
2. Disassembled the Lamp Cover.
PT-TW331R / PT-TX301R series
2-5
3.Unplug 1 connector (as blue square),then
remove the Top Cover Module.
4. Disassemble the Top Cover Module.
2-5  Disassemble Top Cover 
Module
1.  Unscrew 2 screws (as red circle) from 
the Top Cover and unscrew 8 screws (as 
green circle) from the Bottom Cover
2. Pull upward the Top Cover Module.
PT-TW331R / PT-TX301R series
2-6
2-6   Disassemble IR Sensor 
 
and IR Sensor Board
1. Unscrew 2 screws(as red circle) and tear    
    off the Tape (as yellow square) to   
disassemble the IR Sensor Module.
2.Tear off the Mylar(as blue square).
3. Separate the IR Holder and IR Sensor  
    Board.
4.Tear off the Tape (as red square) to   
    disassemble the IR Sensor Board.
IR Sensor Module
IR  Holder
IR Sensor Board
Page of 92
Display

Click on the first or last page to see other PT-TX301RU / PT-TX301RE / PT-TX301REA / PT-TW331RU / PT-TW331RE / PT-TW331REA (serv.man2) service manuals if exist.