DOWNLOAD Panasonic PT-RZ970 / PT-RW930 / PT-RX110 (serv.man6) Service Manual ↓ Size: 35.32 MB | Pages: 125 in PDF or view online for FREE

Model
PT-RZ970 PT-RW930 PT-RX110 (serv.man6)
Pages
125
Size
35.32 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz970-pt-rw930-pt-rx110-sm6.pdf
Date

Panasonic PT-RZ970 / PT-RW930 / PT-RX110 (serv.man6) Service Manual ▷ View online

9
PREFACE
< RZ970/RW930/RX110 >
Color system
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Projected image size
*5
1.27 m (50") to 15.24 m (600")
Image aspect ratio
PT‑RZ970, PT‑RW930
16:10
PT-RX110
4:3
Projection method
[FRONT/REAR]/[FLOOR/CEILING]
Power cord length
3.0 m (118-1/8")
Outer case
Molded plastic
Outer color
Black model
Black
White model
White
Dimensions
Width
498 mm (19-19/32")
Height
200 mm (7-7/8") (with legs at shortest position)
Depth
PT‑RZ970, PT‑RW930, PT‑RX110
581 mm (22-7/8") (including standard zoom lens)
PT‑RZ970L, PT‑RW930L, PT‑RX110L
538 mm (21-3/16") (excluding the Lens Mount Cover 
and optional lens)
Weight
PT‑RZ970, PT‑RW930, PT‑RX110
Approx. 23.2 k] (51.1 lbs.)
*6
 (including standard zoom 
lens)
PT‑RZ970L, PT‑RW930L, PT‑RX110L
Approx. 22.4 k] (49.4 lbs.)
*6
 (excluding the Lens Mount 
Cover and optional lens)
Noise level
*3
41 dB
Operating 
environment
Operating 
environment 
temperature
*7
0 °C (32 °F) to 45 °C (113 °F)
Operating 
environment 
humidity
10 % to 80 % (no condensation)
Remote 
control
Power supply
DC 3 V (AAA/R03 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
102 ] (3.6 ozs.) (including batteries)
Dimensions
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1  The lens for PT-RZ970L series, PT-RW930L series, and PT-RX110L series is sold separately.
*2  Value is for the supplied standard zoom lens. The value varies depending on the lens.
*3  Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*4  The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the
ISO/IEC 21118:2012 international standards.
*5  When the lens ET-DLE055 is used, the maximum size is 5.08 m (200"). When the lens ET-DLE030 is used, the maximum size is 2.54 m (100") to
8.89 m (350").
*6  Average value. Weight varies for each product.
*7  When using the projector at an altitude lower than 2 700 m (8 858') above sea level, and the operating environment temperature becomes 30 °C
(86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2 700 m (8 858') and 
4 200 m (13 780'), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the 
projector.
Contrast ratio
*3
10 000:1 (when [DYNAMIC CONTRAST] is set to [3])
10
PREFACE
< RZ970/RW930/RX110 >
<RGB 1 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC/VIDEO x 1))
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
VIDEO signal
BNC 1.0 V [p-p], 75 Ω
<RGB 2 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP compatible, Deep Color compatible
<SDI IN> terminal
(Only for PT-RZ970)
1 set (BNC)
SD-SDI signal
SMPTE ST 259 compliant
HD-SDI signal
SMPTE ST 292 compliant
3G-SDI signal
SMPTE ST 424 compliant
<SERIAL/MULTI PROJECTOR 
SYNC IN>/ <SERIAL/MULTI 
PROJECTOR SYNC OUT> 
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/ <REMOTE 1 
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK/LAN> terminal 1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
TM
 compliant), PJLink compatible, 
100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
Note
 
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
2. 2 Connecting terminal
11
PREFACE
< RZ970/RW930/RX110 >
2.
 3. Compatible signal
<RGB 1 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC/VIDEO x 1))
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
VIDEO signal
BNC 1.0 V [p-p], 75 Ω
<RGB 2 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP compatible, Deep Color compatible
<SDI IN> terminal
(Only for PT-RZ970)
1 set (BNC)
SD-SDI signal
SMPTE ST 259 compliant
HD-SDI signal
SMPTE ST 292 compliant
3G-SDI signal
SMPTE ST 424 compliant
<SERIAL/MULTI PROJECTOR 
SYNC IN>/ <SERIAL/MULTI 
PROJECTOR SYNC OUT> 
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/ <REMOTE 1 
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK/LAN> terminal 1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
TM
 compliant), PJLink compatible, 
100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
Note
 
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
f
For details of the types of video signals that can be used with the projector, refer to “List of compatible signals” in Operating   
  Instructions.
12
PREFACE
< RZ970/RW930/RX110 >
2. 4. Dimensions
Unit: mm
221 (8-11/16)
249 (9-13/16)
498 (19-19/32)
457 (18)
442 (17-13/32)
20.5 (13/16)
115.5 (4-9/16)
200 (7-7/8)
43 (1-11/16)
538 (21-3/16)
* The above dimensions are obtained when the standard zoom lens is attached.
* Actual dimensions may differ depending on the product.
Page of 125
Display

Click on the first or last page to see other PT-RZ970 / PT-RW930 / PT-RX110 (serv.man6) service manuals if exist.