Panasonic PT-RZ970 / PT-RW930 / PT-RX110 (serv.man6) Service Manual ▷ View online
8
PREFACE
< RZ970/RW930/RX110 >
2. Specifications
2. 1. Specifications
f
The specifications of the projector are as follows.
Power supply
PT‑RZ970B, PT‑RZ970W, PT‑RZ970LB,
PT‑RZ970LW, PT‑RZ970BD, PT‑RZ970WD,
PT‑RZ970LBD, PT‑RZ970LWD, PT‑RZ970BA,
PT‑RZ970WA, PT‑RZ970LBA, PT‑RZ970LWA,
PT‑RW930B, PT‑RW930W, PT‑RW930LB,
PT‑RW930LW, PT‑RW930BD, PT‑RW930WD,
PT‑RW930LBD, PT‑RW930LWD,
PT‑RW930BA, PT‑RW930WA, PT‑RW930LBA,
PT‑RW930LWA, PT‑RX110B, PT‑RX110W,
PT‑RX110LB, PT‑RX110LW, PT‑RX110BD,
PT‑RX110WD, PT‑RX110LBD, PT‑RX110LWD,
PT‑RX110BA, PT‑RX110WA, PT‑RX110LBA,
PT-RX110LWA
100 V - 240 V ~ (100 V - 240 V alternating current),
50 Hz/60 Hz
PT‑RZ970BT, PT‑RW930BT, PT‑RX110BT
110 V ~ (110 V alternating current), 60 Hz
Power consumption
PT‑RZ970B, PT‑RZ970W, PT‑RZ970LB,
PT‑RZ970LW, PT‑RZ970BD, PT‑RZ970WD,
PT‑RZ970LBD, PT‑RZ970LWD, PT‑RZ970BA,
PT‑RZ970WA, PT‑RZ970LBA, PT‑RZ970LWA,
PT‑RW930B, PT‑RW930W, PT‑RW930LB,
PT‑RW930LW, PT‑RW930BD, PT‑RW930WD,
PT‑RW930LBD, PT‑RW930LWD,
PT‑RW930BA, PT‑RW930WA, PT‑RW930LBA,
PT‑RW930LWA, PT‑RX110B, PT‑RX110W,
PT‑RX110LB, PT‑RX110LW, PT‑RX110BD,
PT‑RX110WD, PT‑RX110LBD, PT‑RX110LWD,
PT‑RX110BA, PT‑RX110WA, PT‑RX110LBA,
PT-RX110LWA
1 050 W (10.4 A - 5.0 A)
PT‑RZ970BT, PT‑RW930BT, PT‑RX110BT
1 050 W (9.5 A)
Power consumption (during
standby)
PT‑RZ970B, PT‑RZ970W, PT‑RZ970LB,
PT‑RZ970LW, PT‑RZ970BD, PT‑RZ970WD,
PT‑RZ970LBD, PT‑RZ970LWD, PT‑RZ970BA,
PT‑RZ970WA, PT‑RZ970LBA, PT‑RZ970LWA,
PT‑RW930B, PT‑RW930W, PT‑RW930LB,
PT‑RW930LW, PT‑RW930BD, PT‑RW930WD,
PT‑RW930LBD, PT‑RW930LWD,
PT‑RW930BA, PT‑RW930WA, PT‑RW930LBA,
PT‑RW930LWA, PT‑RX110B, PT‑RX110W,
PT‑RX110LB, PT‑RX110LW, PT‑RX110BD,
PT‑RX110WD, PT‑RX110LBD, PT‑RX110LWD,
PT‑RX110BA, PT‑RX110WA, PT‑RX110LBA,
PT-RX110LWA
When [STANDBY MODE] is set to [ECO]: Approx.
0.3 W
PT‑RZ970BT, PT‑RW930BT, PT‑RX110BT
When [STANDBY MODE] is set to [ECO]: Approx.
0.2 W
When [STANDBY MODE] is set to [NORMAL]: Approx. 3 W
When the [QUICK STARTUP] function is enabled: Approx. 85 W
When the [QUICK STARTUP] function is enabled: Approx. 85 W
DLP chip
Size
PT-RZ970
17 mm (0.67") (aspect ratio 16:10)
PT-RW930
16.5 mm (0.65") (aspect ratio 16:10)
PT-RX110
17.8 mm (0.7") (aspect ratio 4:3)
Display system
DLP chip x 1, DLP projection system
Number of pixels
PT-RZ970
2 304 000 pixels (1 920 x 1 200 dots)
PT-RW930
1 024 000 pixels (1 280 x 800 dots)
PT-RX110
786 432 pixels (1 024 x 768 dots)
Lens
*1
Electric zoom
PT-RZ970
1.7 to 2.4:1
PT‑RW930, PT‑RX110
1.8 to 2.5:1
Electric focus
F = 1.7 to 1.9
f = 25.6 mm to 35.7 mm
Light source
Laser light source, 2 sets
Light output
*2
PT‑RZ970, PT‑RW930
9 400 lm
*3
, 10 000 lm (center)
*4
(Both values are measured when [OPERATING MODE]
is set to [NORMAL].)
PT-RX110
10 000 lm
*3
, 10 400 lm (center)
*4
(Both values are measured when [OPERATING MODE]
is set to [NORMAL].)
9
PREFACE
< RZ970/RW930/RX110 >
Color system
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Projected image size
*5
1.27 m (50") to 15.24 m (600")
Image aspect ratio
PT‑RZ970, PT‑RW930
16:10
PT-RX110
4:3
Projection method
[FRONT/REAR]/[FLOOR/CEILING]
Power cord length
3.0 m (118-1/8")
Outer case
Molded plastic
Outer color
Black model
Black
White model
White
Dimensions
Width
498 mm (19-19/32")
Height
200 mm (7-7/8") (with legs at shortest position)
Depth
PT‑RZ970, PT‑RW930, PT‑RX110
581 mm (22-7/8") (including standard zoom lens)
PT‑RZ970L, PT‑RW930L, PT‑RX110L
538 mm (21-3/16") (excluding the Lens Mount Cover
and optional lens)
Weight
PT‑RZ970, PT‑RW930, PT‑RX110
Approx. 23.2 k] (51.1 lbs.)
*6
(including standard zoom
lens)
PT‑RZ970L, PT‑RW930L, PT‑RX110L
Approx. 22.4 k] (49.4 lbs.)
*6
(excluding the Lens Mount
Cover and optional lens)
Noise level
*3
41 dB
Operating
environment
Operating
environment
temperature
*7
0 °C (32 °F) to 45 °C (113 °F)
Operating
environment
humidity
10 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AAA/R03 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
Weight
102 ] (3.6 ozs.) (including batteries)
Dimensions
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1 The lens for PT-RZ970L series, PT-RW930L series, and PT-RX110L series is sold separately.
*2 Value is for the supplied standard zoom lens. The value varies depending on the lens.
*3 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*4 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the
ISO/IEC 21118:2012 international standards.
*5 When the lens ET-DLE055 is used, the maximum size is 5.08 m (200"). When the lens ET-DLE030 is used, the maximum size is 2.54 m (100") to
8.89 m (350").
*6 Average value. Weight varies for each product.
*7 When using the projector at an altitude lower than 2 700 m (8 858') above sea level, and the operating environment temperature becomes 30 °C
(86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2 700 m (8 858') and
4 200 m (13 780'), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the
projector.
Contrast ratio
*3
10 000:1 (when [DYNAMIC CONTRAST] is set to [3])
10
PREFACE
< RZ970/RW930/RX110 >
<RGB 1 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC/VIDEO x 1))
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
VIDEO signal
BNC 1.0 V [p-p], 75 Ω
<RGB 2 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP compatible, Deep Color compatible
<SDI IN> terminal
(Only for PT-RZ970)
1 set (BNC)
SD-SDI signal
SD-SDI signal
SMPTE ST 259 compliant
HD-SDI signal
SMPTE ST 292 compliant
3G-SDI signal
SMPTE ST 424 compliant
<SERIAL/MULTI PROJECTOR
SYNC IN>/ <SERIAL/MULTI
PROJECTOR SYNC OUT>
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/ <REMOTE 1
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK/LAN> terminal 1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
TM
compliant), PJLink compatible,
100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
Note
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
2. 2 Connecting terminal
11
PREFACE
< RZ970/RW930/RX110 >
2.
3. Compatible signal
<RGB 1 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC/VIDEO x 1))
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
VIDEO signal
BNC 1.0 V [p-p], 75 Ω
<RGB 2 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP compatible, Deep Color compatible
<SDI IN> terminal
(Only for PT-RZ970)
1 set (BNC)
SD-SDI signal
SD-SDI signal
SMPTE ST 259 compliant
HD-SDI signal
SMPTE ST 292 compliant
3G-SDI signal
SMPTE ST 424 compliant
<SERIAL/MULTI PROJECTOR
SYNC IN>/ <SERIAL/MULTI
PROJECTOR SYNC OUT>
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/ <REMOTE 1
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK/LAN> terminal 1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
TM
compliant), PJLink compatible,
100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
Note
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
f
For details of the types of video signals that can be used with the projector, refer to “List of compatible signals” in Operating
Instructions.
Click on the first or last page to see other PT-RZ970 / PT-RW930 / PT-RX110 (serv.man6) service manuals if exist.