Panasonic PT-RZ970 / PT-RW930 / PT-RX110 (serv.man4) Service Manual ▷ View online
ADJ-9
SECTION 3 ADJUSTMENTS
< RZ970/RW930/RX110 >
1. 5. Model information setup
1. Enter the service mode, and select submenu [MODEL]
of [EXTRA OPTION] menu.
2. Select the model and press the [ENTER] button.
3. The model information will be applied after the main
power restart.
4. Confirm the model information in the sub menu [STA-
TUS] of the menu [PROJECTOR SETUP].
1. 6. Date and time setup
1. Select the [DATE AND TIME] of [PROJECTOR SETUP]
menu.
2. Set the time zone, date, and time of the built-in clock of
the projector.
• For further instructions, refer to the operating instruc-
tions.
ADJ-10
SECTION 3 ADJUSTMENTS
< RZ970/RW930/RX110 >
1. 7. LD unit runtime reset
1. 7. 1. Equipment to be used
1. Computer : Use it for runtime reset with service tool.
2. Communication cable :
3. Service software : [LDRestTool.exe] Download from the projector service Web (PASS).
1. 7. 2. Connection preparations
1. Check the settings of the projector.
1) The [INPUT SELECT] of sub menu [RS-232C] must be set according to the connection method.
2) The [EMULATE] of sub menu [RS-232C], please set to [DEFAULT]. (in service mode)
3) Check the RS-232C settings (ID, Baudrate and Parity) and take a note.
1) The [DIGITAL LINK MODE] of sub menu [NETWORK], is select to [AUTO] or [ETHERNET].
2) Check the network IP address of the projector and take a note.
3) Set the IP address of computer to approximate value of projector IP address..
[Note]
• If you have changed the each menu settings, please return settings of the original (customers) after work.
2. Connect the projector and the PC by using a communication cable.
1. 7. 3. Reset procedure
1. Switch the projector to "Normal-Standby" mode (Power indicator is lighting in red).
2. Activate a [LDRestTool.exe] Service software.
3. Select the projector model number.
Serial terminal connection
D-sub 9 pin (male/female RS-232C straight)
LAN terminal connection
LAN cable. (When connecting directly, use a cross cable)
Serial terminal connection
LAN terminal connection
LAN cable (straight)
LAN cable (straight)
Hub
Projector
LAN
Computer
Projector
SERIAL IN
Communication cable (straight)
Computer
D-Sub 9P
(male)
Serial terminal connection example
LAN terminal connection example
ADJ-11
SECTION 3 ADJUSTMENTS
< RZ970/RW930/RX110 >
4. Select [Setting] of [Option] menu, then select connection method and enter the setting information of the projector.
• Select [Serial] and setup the port, baud rate and parity.
• Select [LAN] and set up IP Address, Username, Password and Command Port.
[Note] If the Username and Password has been changed, please select serial terminal connection.
5. The status and runtime of each LD unit will be displayed by clicking the [ Get Information ] button.
[Display example] t If the open failure occurs on the LD2-1.
Items
Default
SERIAL
Port
–
Baud Rate
9600bps
Parity
None
LAN
IP Address
192.168.0.8
Username
admin1
Password
panasonic
Command Port
1024
Serial terminal connection
LAN terminal connection
When the open failure occurred,
the text characters becomes red.
In addition, "OFF" is displayed on
status.
ADJ-12
SECTION 3 ADJUSTMENTS
< RZ970/RW930/RX110 >
LD1-3
LD2-2
LD2-3
LD1-2
LD2-4
LD1-4
LD2-1
LD1-1
[Reference] t All LD units location
6. Click the [Reset] button corresponding to the replaced LD unit No.
7. A confirmation window is displayed. If LD No. is correct, click the [OK] button and reset the runtime.
(Display example of LD2-1 reset)
(Display example of LD2-1 reset)
8. Completion screen is displayed, and click the [OK] button. Confirm the runtime is set to 0h.
9. After completing the reset, restart the projector and check the runtime with the [STATUS] screen.
Click on the first or last page to see other PT-RZ970 / PT-RW930 / PT-RX110 (serv.man4) service manuals if exist.