DOWNLOAD Panasonic PT-RZ670 / PT-RW630 (serv.man6) Service Manual ↓ Size: 2.7 MB | Pages: 10 in PDF or view online for FREE

Model
PT-RZ670 PT-RW630 (serv.man6)
Pages
10
Size
2.7 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz670-pt-rw630-sm6.pdf
Date

Panasonic PT-RZ670 / PT-RW630 (serv.man6) Service Manual ▷ View online

PREFACE
< RZ670/RW630 >
2. Specifications
  2. 1. Specifications
The specifications of the projector are as follows.
Power supply
PT-RZ670B, PT-RZ670W, 
PT-RZ670LB, PT-RZ670LW, 
PT-RW630B, PT-RW630W, 
PT-RW630LB, PT-RW630LW
AC 100 V - 240 V, 50 Hz/60 Hz (9.0 A - 4.0 A)
PT-RZ670BD, PT-RZ670WD, 
PT-RZ670LBD, PT-RZ670LWD, 
PT-RW630BD, PT-RW630WD, 
PT-RW630LBD, PT-RW630LWD
PT-RZ670BT, PT-RW630BT
AC 110 V, 60 Hz (8.0 A)
Power consumption
720 W
PT-RZ670B, PT-RZ670W, 
PT-RZ670LB, PT-RZ670LW, 
PT-RW630B, PT-RW630W, 
PT-RW630LB, PT-RW630LW
Approx. 0.3 W when [STANDBY MODE] is set to [ECO]
PT-RZ670BD, PT-RZ670WD, 
PT-RZ670LBD, PT-RZ670LWD, 
PT-RW630BD, PT-RW630WD, 
PT-RW630LBD, PT-RW630LWD
PT-RZ670BT, PT-RW630BT
Approx. 0.2 W when [STANDBY MODE] is set to [ECO]
Approx. 3 W when [STANDBY MODE] is set to [NORMAL]
DLP chip
Size
PT-RZ670
17 mm (0.67") (aspect ratio 16:10)
PT-RW630
16.5 mm (0.65") (aspect ratio 16:10)
Display system
1-unit DLP chip, DLP type
Number of pixels
PT-RZ670
2 304 000 pixels (1 920 x 1 200 dots)
PT-RW630
1 024 000 pixels (1 280 x 800 dots)
Lens
*1
Electric zoom
1.7 to 2.4:1
Electric focus
F = 1.7 to 1.9
f = 25.6 mm to 35.7 mm
Light source
Laser, 2-bank type
Light output
*2*3
6 500 lm (ANSI)
Contrast ratio
*3
10 000:1 (when [DYNAMIC CONTRAST] is set to [3])
Color system
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Projected image size
*4
1.27 m (50") to 15.24 m (600")
Image aspect ratio
16:10
Projection method
[FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR]
Power cable length
3.0 m (118-1/8")
Outer case
Molded plastic
Outer color
White model
White
Black model
Black
*1  The lens for PT-RZ670L series and PT-RW630L series is sold separately.
*2  Value is for the supplied standard zoom lens. The value varies depending on the lens.
*3  Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*4  When the lens ET-DLE055 is used, the maximum size is 5.08 m (200"). When the lens ET-DLE030 is used, the maximum size is 2.54 m (100") to 
8.89 m (350").
6
PREFACE
< RZ670/RW630 >
Dimensions
Width
498 mm (19-19/32")
Height
200 mm (7-7/8") (with legs at shortest position)
Depth
PT-RZ670, PT-RW630
581 mm (22-7/8") (including standard zoom lens)
PT-RZ670L, PT-RW630L
538 mm (21-3/16") (excluding lens mount cover and optional lens)
Weight
PT-RZ670, PT-RW630
Approx. 23.2 k
] (51.1 lbs.)
*1
 (including standard zoom lens)
PT-RZ670L, PT-RW630L
Approx. 22.5 k
] (49.6 lbs.)
*1
 (excluding lens mount cover and optional 
lens)
Noise level
*2
35 dB
Operating 
environment
Operating 
environment 
temperature
*3
0 °C (32 °F) to 45 °C (113 °F)
Operating 
environment 
humidity
10 % to 80 % (no condensation)
Remote 
control
Power supply
DC 3 V (AAA/R03 battery x 2)
Operating range
Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
102 
] (3.6 ozs.) (including batteries)
Dimensions
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1  Average value. Weight varies for each product.
*2  Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*3  When using the projector at elevations lower than 2 700 m (8 858') above sea level, and the operating environment temperature becomes 35 °C 
(95 °F) or higher, the light output may be reduced to protect the projector. When using the projector at elevations between 2 700 m (8 858') and 
4 200 m (13 780'), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the 
projector.
7
PREFACE
< RZ670/RW630 >
  2. 2. Applicable scanning frequency
Refer to operating instructions “List of compatible signals” for the types of video signals that can be used with the projector.
For video signal
Horizontal: 15.73 kHz, Vertical: 59.94 Hz; Horizontal: 15.63 kHz, Vertical: 50 Hz
For Y/C signal
For RGB signal
Horizontal: 15 kHz to 100 kHz, Vertical: 24 Hz to 120 Hz
PIAS (Panasonic Intelligent Auto Scanning) system
 
f Dot clock frequency: 162 MHz or less
For YC
B
C
R
/YP
B
P
R
 signal
 
f 525i (480i)
Horizontal: 15.73 kHz, Vertical: 59.94 Hz
 
f 525p (480p)
Horizontal: 31.47 kHz, Vertical: 59.94 Hz
 
f 750 (720)/60p
Horizontal: 45 kHz, Vertical: 60 Hz
 
f 1125 (1035)/60i
Horizontal: 33.75 kHz, Vertical: 60 Hz
 
f 1125 (1080)/50i
Horizontal: 28.13 kHz, Vertical: 50 Hz
 
f 1125 (1080)/24sF
Horizontal: 27 kHz, Vertical: 48 Hz
 
f 1125 (1080)/30p
Horizontal: 33.75 kHz, Vertical: 30 Hz
 
f 1125 (1080)/50p
Horizontal: 56.25 kHz, Vertical: 50 Hz
 
f 625i (576i)
Horizontal: 15.63 kHz, Vertical: 50 Hz
 
f 625p (576p)
Horizontal: 31.25 kHz, Vertical: 50 Hz
 
f 750 (720)/50p
Horizontal: 37.5 kHz, Vertical: 50 Hz
 
f 1125 (1080)/60i
Horizontal: 33.75 kHz, Vertical: 60 Hz
 
f 1125 (1080)/24p
Horizontal: 27 kHz, Vertical: 24 Hz
 
f 1125 (1080)/25p
Horizontal: 28.13 kHz, Vertical: 25 Hz
 
f 1125 (1080)/60p
Horizontal: 67.5 kHz, Vertical: 60 Hz
 
f The SYNC/HD and VD terminals do not support 3 value SYNC.
For DVI-D signal
525i (480i)
*1
, 625i (576i)
*1
, 525p (480p), 625p (576p), 750 (720)/60p,  
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,  
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,  
1125 (1080)/60p, 1125 (1080)/50p
 
f Displayable resolution: VGA to WUXGA (non-interlaced)
 
f Dot clock frequency: 25 MHz to 162 MHz
For HDMI signal
525i (480i)
*1
, 625i (576i)
*1
, 525p (480p), 625p (576p), 750 (720)/60p,  
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,  
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,  
1125 (1080)/60p, 1125 (1080)/50p
 
f Displayable resolution: VGA to WUXGA (non-interlaced)
 
f Dot clock frequency: 25 MHz to 162 MHz
For SDI signal
(Only for PT-RZ670)
SD-SDI signal
SMPTE ST 259 compliant
YC
B
C
R
 4:2:2 10-bit
480i, 576i
Single link HD-SDI signal
SMPTE ST 292 compliant
YP
B
P
R
 4:2:2 10-bit
720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 
1080/24p, 1080/24sF, 1080/30p
3G-SDI signal
SMPTE ST 424 compliant
YP
B
P
R
 4:2:2 10-bit
1080/50p, 1080/60p
RGB 4:4:4 12-bit/10-bit
1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
*1  Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
Note
 
f DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.
8
PREFACE
< RZ670/RW630 >
  2. 3. Terminal
<RGB 1 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC x 1))
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
VIDEO signal
BNC: 1.0 V [p-p], 75 Ω
<RGB 2 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP compatible, Deep Color compatible
<SDI IN> terminal
(Only for PT-RZ670)
1 set (BNC)
SD-SDI signal
SMPTE ST 259 compliant
HD-SDI signal
SMPTE ST 292 compliant
3G-SDI signal
SMPTE ST 424 compliant
<SERIAL IN>/<SERIAL OUT> 
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/<REMOTE 1 
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK/LAN> terminal
1 set, RJ-45, for network and DIGITAL LINK connections, PJLink compatible, 100Base-TX, Art-Net 
compatible
Note
 
f The model numbers of accessories and optional accessories are subject to change without prior notice.
9
Page of 10
Display

Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man6) service manuals if exist.