DOWNLOAD Panasonic PT-RZ670 / PT-RW630 (serv.man5) Service Manual ↓ Size: 5.41 MB | Pages: 23 in PDF or view online for FREE

Model
PT-RZ670 PT-RW630 (serv.man5)
Pages
23
Size
5.41 MB
Type
PDF
Document
Service Manual / Other
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz670-pt-rw630-sm5.pdf
Date

Panasonic PT-RZ670 / PT-RW630 (serv.man5) Service Manual / Other ▷ View online

SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
[NETWORK] 
Sub-menu item
Factory default
[DIGITAL LINK MODE]
[AUTO]
[DIGITAL LINK SETUP]
[DIGITAL LINK STATUS]
[NETWORK SETUP]
[NETWORK CONTROL]
[NETWORK STATUS]
[DIGITAL INTERFACE BOX]
[Art-Net SETUP]
[OFF]
Note
 
f Some items may not be adjusted or used for certain signal formats to be input to the projector.
The menu items that cannot be adjusted or used are shown in black characters, and they cannot be selected.
 
f Sub-menu items and factory default settings vary depending on the selected input terminal.
INF - 8
SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
3. Service Mode
This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.
  3. 1. Setting to Service Mode
1. Select the sub menu [service password] of the main menu [projector setup] and push the enter (ENTER) button.
2. Input the password "1565" by remote control and press the ENTER button.
3. Press the MENU button. Service mode menu will be displayed.
  3. 2. Resetting to User Mode
1. Select the sub menu [service password] of the main menu [projector setup] and push the enter (ENTER) button.
2. Input the password "0000" by remote control and press the ENTER button.
3. Press the MENU button. User mode menu will be displayed.
  3. 3. Functions in Service Mode
    3. 3. 1. EXTRA OPTION
[EXTRA OPTION] is added to bottom in the main menu at the time of service mode.
1. DYNAMIC GAMMA MODE
Setting of the DYNAMIC GAMMA operation. 
- ON : Enables Dynamic gamma. (default)
OFF : Disables Dynamic gamma.
2. 3DCMS
Setting of the 3D Color Management System operation.
- ON : Enables 3D Color Management system. (default)
- OFF : Disables 3D Color Management system.
[ Note ]
Function specification varies according to a version of the main microcomputer software.
INF - 9
SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
3. SELF CHECK
Self-diagnosing information Displays.
 SELF CHECK
(1)-
 MAIN         : 1.00
(1) Main microprocessor software version
(2)-
 SUB          : 1.00
(2) Sub microprocessor software version
(3)-
 DIGITAL LINK : 1.30.20.5
(3) DIGITAL LINK microprocessor software version
(4)-
 DDP          : 00.0400.00 
(4) Formatter microprocessor software version
(5)-
 LD           : 1.00 / 1.00
(5) LD driver main software version (LD1/LD2)
(6)-
 LD SUB       : 1.00
(6) LD driver sub software version
(7)-
 EMULATE      : DEFAULT
(7) Emulate setting state
(8)-
 OK  AIR TEMP 123/456   OK  DMD TEMP 123/456
(8) Intake air temperature (Celsius/Fahrenheit)
(9)-
 OK  OUT TEMP 123/456   OK  LD 123/456
DMD temperature (Celsius/Fahrenheit)
(10)-
 OK  FAN 1111 1111 1111 1
(9) Exhaust air temperature (Celsius/Fahrenheit)
(11)-
 OK  LD1 1111  LD2 1111
LD temperature (Celsius/Fahrenheit)
(12)-
 OK  PHOTO  123456/123456/123456/123456
(13)-
 OK  ANGLE SENSOR H -12.34/V +12.34
(14)-
 OK  ATM SENSOR  1234/567
(10) Fan condition (1: normal / 0:stop)
  OK   FAN
(11) LD units condition (1: normal / 0:stop)
  OK   LD1
LD2
(12) Color sensor condition (Red / Green / Blue / Yellow)
(13) Angle sensor condition (Horizontal angle / Vertical angle)
(14) Atmosphere sensor condition (hPa / Celsius)
4. AUTO INDEX CALIBRATION
When replaced the phosphor wheel and trimming wheel, perform automatic adjustment of each wheel rotational phase.
* Please refer to SECTION 3 (Adjustments) for the procedure.
5. PW1 INDEX
6. PW2 INDEX
7. CW INDEX
8. POWER OFF MESSAGE
Operation setting of shutter at turning off the projector
- SHUTTER KEEP: When pushing the standby key while the shutter mode is on, the projector keeps the shutter
mode on and sets into standby mode.
- SHUTTER OPEN: When pushing the standby key while the shutter mode is on, the projector opens the shutter
and displays the "Power OFF confirmation message". (Default setting)
9. ERROR OSD
The screen display setting of the light source error. (for rear projection)
- ON: "Lamp error message" is displayed on OSD.
- OFF: Does not display the "Lamp error message" in OSD. (Default setting)
10. MODEL
Set this when the A-P.C.Board is replaced.
* If you can copy EEPROM data from the old A-P.C.Board, this setting is unnecessary.
* This model setting is changed after turn power  restart.
L
D
1-1
L
D
1-2
L
D
1-3
L
D
1-4
L
D
2-1
L
D
2-2
L
D
2-3
L
D
2-4
Make the rotation phase adjustment of the wheels individually.
(Please do not change the setting, usually.)
1  1  1  1      1  1  1  1      1  1  1  1     1 
RADIATOR3
PW1
PW2
POWER
LD DRIVER
EXHAUST3
DMD
EXHAUST1
EXHAUST2
RADIATOR2
RADIATOR1
PUMP1
PUMP2
1 1 1 1
1 1 1 1
* When [OK] item is abnormal last time and shuts it down, font of [OK] becomes red.
INF - 10
SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
11. LIGHT SELECT
Select the LD to be turned on from the two blocks LD according to the use conditions or purposes.
Switch by pressing the Enter button after selected.
- ALL: Two LD blocks will light. (Default setting)
- LD1: LD1 block will light.
- LD2: LD2 block will light.
* To return ALL When turn off the power.
    3. 3. 2. Additional function of each menu
1. [PICTURE] menu
Press the ENTER button at "PICTURE MODE", the [Ye MODULATE] items is added.
- ON: Enable the yellow correction function.
- OFF: Disable the yellow correction function.
When selected [USER] of sub menu [DYNAMIC CONTRAST],  [AI WINDOW] will be added in the adjusting desired
correction amount items.
- Setting the [AUTO] or [MANUAL] of APL detection area. ([MANUAL] is possible a detailed setting.) 
2. [POSITION] menu
[DVI EQUALIZER] is added to a sub menu.
- When noise contamination to DVI input caused by long cable or external device, set this item so that the 
noise decreases. (AUTO/LOW/MID/HIGH)
Please set to [AUTO] usually.
3. [PROJECTOR SETUP] menu
・ 「DETAILED INFORMATION」is added to [BRIGHTNESS CONTROL STATUS] of sub menu [BRIGHTNESS CONTROL].
- Detailed information of BRIGHTNESS CONTROL can be confirmed.
[EMULATE] is added to sub menu [RS232C], and following other company model items are added.
- MODE_HI
- MODE_NE
- MODE_EP
- MODE_SA
- MODE_SH
- MODE_MI
- MODE_SO
- MODE_CH
- OTHER
The following items or page are added to the sub menu [STATUS].
1) Page 2 (Add Items)
- VERTICAL TILT
Vertical angle
- HORIZONTAL TILT
Horizontal angle
2) Page 3 (Add Items)
- DIGITAL LINK VERSION
DIGITAL LINK microprocessor software version
- FPGA VERSION
FPGA software version (FPGA1/FPGA2)
- DDP VERSION
Formatter microprocessor software version
- LD DRIVER VERSION
LD driver main software version (LD1/LD2)
- LD SUB VERSION
LD driver sub software version
- EMULATE
Emulate setting state
- VERSION
Emulate version
3) Page 5 (Add Page)
- MAIN VER.
Main microprocessor software version
- FPGA VER.
FPGA software version (FPGA1/FPGA2)
- BMP VER.
Bitmap data version
- ENG VER. ~CC VER.
Version of the each font data
 (English/Russian/Korean/Chinese/Japanese/Closed caption)
4) Page 6 (Add Page)
- TEMP(℃)
Intake air temperature (IN) / Optical module temperature (OPT) /
Exhaust air temperature (OUT) / LD1 temperature (LD1) / 
LD2 temperature (LD2)
- FAN MODE
FAN control mode (TYPE A~TYPE J)
- atm
Atmosphere sensor [hPa]
INF - 11
Page of 23
Display

Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man5) service manuals if exist.