DOWNLOAD Panasonic PT-RZ670 / PT-RW630 (serv.man5) Service Manual ↓ Size: 5.41 MB | Pages: 23 in PDF or view online for FREE

SECTION 1  SERVICE  INFORMATION

< RZ670/RW630 >

[PROJECTOR ID]

[ALL]

[PROJECTION METHOD]

[FRONT/FLOOR]

[COOLING CONDITION]

[AUTO]

[HIGH ALTITUDE MODE]

[UNDER 2700m]

[OPERATION SETTING]

―

[LIGHT OUTPUT]

[100.0%]

[BRIGHTNESS CONTROL]

―

[STANDBY MODE]

[NORMAL]

[SCHEDULE]

[OFF]

[STARTUP INPUT SELECT]

[LAST USED]

[RS-232C]

―

[STATUS]

―

[NO SIGNAL SHUT-OFF]

[DISABLE]

[REMOTE2 MODE]

[DEFAULT]

[FUNCTION BUTTON]

―

[DATE AND TIME]

―

[LENS CALIBRATION]

―

[SAVE ALL USER DATA]

―

[LOAD ALL USER DATA]

―

[INITIALIZE]

―

[SERVICE PASSWORD]

―

f Locate a separate, small sub screen in the main screen to project two images simultaneously.

 

 

f Display the test pattern built-in to the projector.
    All white, All black, Window, Window(inversion), Color bar(vertical), Color bar(horizontal), 16:9/4:3aspect frame,  Focus

 

 

f Registered signal list is displayed.
    Registering new signals, Renaming the registered signal, Deleting the registered signal, Protecting the registered signal,
    Expanding signal lock-in range, Registering to the sub memory, Deleting the sub memory

 

 

[SECURITY PASSWORD]

[OFF]

[SECURITY PASSWORD CHANGE]

―

[DISPLAY SETTING]

[OFF]

[TEXT CHANGE]

―

[CONTROL DEVICE SETUP]

―

[CONTROL DEVICE PASSWORD CHANGE]

―

INF - 7

SECTION 1  SERVICE  INFORMATION

< RZ670/RW630 >

[DIGITAL LINK MODE]

[AUTO]

[DIGITAL LINK SETUP]

―

[DIGITAL LINK STATUS]

―

[NETWORK SETUP]

―

[NETWORK CONTROL]

―

[NETWORK STATUS]

―

[DIGITAL INTERFACE BOX]

―

[Art-Net SETUP]

[OFF]

 

f Some items may not be adjusted or used for certain signal formats to be input to the projector.

The menu items that cannot be adjusted or used are shown in black characters, and they cannot be selected.

 

f Sub-menu items and factory default settings vary depending on the selected input terminal.

INF - 8

SECTION 1  SERVICE  INFORMATION

< RZ670/RW630 >

This projector has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu settings for the service operation.

1. Select the sub menu [service password] of the main menu [projector setup] and push the enter (ENTER) button.
2. Input the password "1565" by remote control and press the ENTER button.
3. Press the MENU button. Service mode menu will be displayed.

1. Select the sub menu [service password] of the main menu [projector setup] and push the enter (ENTER) button.
2. Input the password "0000" by remote control and press the ENTER button.
3. Press the MENU button. User mode menu will be displayed.

[EXTRA OPTION] is added to bottom in the main menu at the time of service mode.

1. DYNAMIC GAMMA MODE

・

Setting of the DYNAMIC GAMMA operation. 

- ON : Enables Dynamic gamma. (default)

OFF : Disables Dynamic gamma.

2. 3DCMS

・

Setting of the 3D Color Management System operation.

- ON : Enables 3D Color Management system. (default)
- OFF : Disables 3D Color Management system.

Function specification varies according to a version of the main microcomputer software.

INF - 9

SECTION 1  SERVICE  INFORMATION

< RZ670/RW630 >

3. SELF CHECK

・

Self-diagnosing information Displays.

 SELF CHECK

(1)-

 MAIN         : 1.00

(1) Main microprocessor software version

(2)-

 SUB          : 1.00

(2) Sub microprocessor software version

(3)-

 DIGITAL LINK : 1.30.20.5

(3) DIGITAL LINK microprocessor software version

(4)-

 DDP          : 00.0400.00 

(4) Formatter microprocessor software version

(5)-

 LD           : 1.00 / 1.00

(5) LD driver main software version (LD1/LD2)

(6)-

 LD SUB       : 1.00

(6) LD driver sub software version

(7)-

 EMULATE      : DEFAULT

(7) Emulate setting state

(8)-

 OK  AIR TEMP 123/456   OK  DMD TEMP 123/456

(8) Intake air temperature (Celsius/Fahrenheit)

(9)-

 OK  OUT TEMP 123/456   OK  LD 123/456

DMD temperature (Celsius/Fahrenheit)

(10)-

 OK  FAN 1111 1111 1111 1

(9) Exhaust air temperature (Celsius/Fahrenheit)

(11)-

 OK  LD1 1111  LD2 1111

LD temperature (Celsius/Fahrenheit)

(12)-

 OK  PHOTO  123456/123456/123456/123456

(13)-

 OK  ANGLE SENSOR H -12.34/V +12.34

(14)-

 OK  ATM SENSOR  1234/567

(10) Fan condition (1: normal / 0:stop)

  OK   FAN

(11) LD units condition (1: normal / 0:stop)

  OK   LD1

LD2

(12) Color sensor condition (Red / Green / Blue / Yellow)
(13) Angle sensor condition (Horizontal angle / Vertical angle)
(14) Atmosphere sensor condition (hPa / Celsius)

4. AUTO INDEX CALIBRATION

・

When replaced the phosphor wheel and trimming wheel, perform automatic adjustment of each wheel rotational phase.

* Please refer to SECTION 3 (Adjustments) for the procedure.

5. PW1 INDEX
6. PW2 INDEX
7. CW INDEX

8. POWER OFF MESSAGE

・

Operation setting of shutter at turning off the projector

- SHUTTER KEEP: When pushing the standby key while the shutter mode is on, the projector keeps the shutter

mode on and sets into standby mode.

- SHUTTER OPEN: When pushing the standby key while the shutter mode is on, the projector opens the shutter

and displays the "Power OFF confirmation message". (Default setting)

9. ERROR OSD

・

The screen display setting of the light source error. (for rear projection)

- ON: "Lamp error message" is displayed on OSD.
- OFF: Does not display the "Lamp error message" in OSD. (Default setting)

10. MODEL

・

Set this when the A-P.C.Board is replaced.

* If you can copy EEPROM data from the old A-P.C.Board, this setting is unnecessary.
* This model setting is changed after turn power  restart.

L

D

1-1

L

D

1-2

L

D

1-3

L

D

1-4

L

D

2-1

L

D

2-2

L

D

2-3

L

D

2-4

Make the rotation phase adjustment of the wheels individually.

(Please do not change the setting, usually.)

・

1  1  1  1      1  1  1  1      1  1  1  1     1 

RADIATOR3

PW1

PW2

POWER

LD DRIVER

EXHAUST3

DMD

EXHAUST1

EXHAUST2

RADIATOR2

RADIATOR1

PUMP1

PUMP2

1 1 1 1

1 1 1 1

* When [OK] item is abnormal last time and shuts it down, font of [OK] becomes red.

INF - 10