DOWNLOAD Panasonic PT-RZ670 / PT-RW630 (serv.man3) Service Manual ↓ Size: 3.56 MB | Pages: 14 in PDF or view online for FREE

Model
PT-RZ670 PT-RW630 (serv.man3)
Pages
14
Size
3.56 MB
Type
PDF
Document
Service Manual / Other
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz670-pt-rw630-sm3.pdf
Date

Panasonic PT-RZ670 / PT-RW630 (serv.man3) Service Manual / Other ▷ View online

SECTION 3  ADJUSTMENTS
< RZ670/RW630 >
[Reference]  All LD units location
5. Click the [Reset] button of replaced LD unit No.
6. A confirmation screen is displayed.
    If LD No. is correct, click the [OK] button and reset runtime.
(Display example of LD1-1 reset)
7. Completion screen is displayed, and click the [OK] button.
    Confirm the runtime is set to 0h.
(Display example of LD1-1 reset)
8. After these process successfully completed, reboot the projector and check the runtime by the [STATUS] screen.
LD2-4
LD1-1
LD1-2
LD1-4
LD2-1
LD2-2
LD2-3
LD1-3
ADJ - 10
SECTION 3  ADJUSTMENTS
< RZ670/RW630 >
2. Software Update procedure
* Update the software by connecting to a serial terminal or LAN terminal. (DIGITAL LINK software is serial connection only)
* Usually recommend LAN terminal connection. (quick to update) 
  2. 1. Equipment to be used
1. Computer : Use it for the transfer of software.
2. Communication cable
  D-sub 9pin (male/female RS-232C straight)
  LAN cable. (When connecting directly, use a cross cable)
3. Service Software : [MainSubNet Update Tool.exe] Download from the projector service Web (PASS). 
4. Microprocessor Software: Download the software file from the projector service Web (PASS) to the PC.
  2. 2. Connection Preparations
1. Check the settings of the projector.
1) The [INPUT SELECT] of sub menu [RS-232C] must be set according to the connection method.
2) The [EMULATE] of sub menu [RS-232C], is select to [DEFAULT]. (in service mode)
3) Check the RS-232C settings (ID, Baudrate  and Parity) and take a note.
1) The [DIGITAL LINK MODE] of sub menu [NETWORK], is select to [AUTO] or [ETHERNET].
2) Check the network IP address of the projector and take a note.
3) Set the IP address of computer to approximate value of projector IP address.
・If you have changed the each menu settings, please return settings of the original (customers) after work.
・Set up your computer not to standby or shutdown.
2. Connect the projector and the PC by using a communication cable.
  2. 3. Update procedure
1. Switch the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Activate service software (MainSubNet Update Tool.exe) on a computer, and select Model, then click the [OK] button.
[Note]
Serial terminal connection
LAN terminal connection
Serial terminal connection
LAN terminal connection
Serial terminal connection
LAN terminal connection
ADJ - 11
SECTION 3  ADJUSTMENTS
< RZ670/RW630 >
3. Select the connection method, and enter the setting information of the projector.
・ The factory default setting of the user name is "admin1" and the password is "panasonic".
・If the Username, Password has been changed, please work with serial terminal connection.
4. Connection setup is complete, click the [Connection Check] button.
5. A result of the connection confirmation is displayed.
・ " Check : OK "  ⇒ Click the [OK] button and step to the next.
・ " Check : NG "  ⇒ Check the setting in step 3.
[Note]
LAN terminal connection
ADJ - 12
SECTION 3  ADJUSTMENTS
< RZ670/RW630 >
6. Click the [load] button which you want to update the software.
7. Select the new software, and click [Open] button.
8. After getting the software, a checkmark and path name to the software and a version will be displayed on the window.
    Click the [Update] button to start updating of the software.
・ If you do not want to update the software, uncheck the software.
9. Click [OK] button to start updating if the software version is right.
ADJ - 13
Page of 14
Display

Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man3) service manuals if exist.