DOWNLOAD Panasonic PT-RZ670 / PT-RW630 (serv.man18) Service Manual ↓ Size: 62.77 MB | Pages: 115 in PDF or view online for FREE

Model
PT-RZ670 PT-RW630 (serv.man18)
Pages
115
Size
62.77 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz670-pt-rw630-sm18.pdf
Date

Panasonic PT-RZ670 / PT-RW630 (serv.man18) Service Manual ▷ View online

PREFACE
< RZ670/RW630 >
  2. 3. Terminal
<RGB 1 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC x 1))
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
VIDEO signal
BNC: 1.0 V [p-p], 75 Ω
<RGB 2 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP compatible, Deep Color compatible
<SDI IN> terminal
(Only for PT-RZ670)
1 set (BNC)
SD-SDI signal
SMPTE ST 259 compliant
HD-SDI signal
SMPTE ST 292 compliant
3G-SDI signal
SMPTE ST 424 compliant
<SERIAL IN>/<SERIAL OUT> 
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/<REMOTE 1 
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK/LAN> terminal
1 set, RJ-45, for network and DIGITAL LINK connections, PJLink compatible, 100Base-TX, Art-Net 
compatible
Note
 
f The model numbers of accessories and optional accessories are subject to change without prior notice.
9
1. The name of each part  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 INF-2
1. 1. Projector body
1. 2. Control panel
1. 3. Connecting terminals
1. 4. Remote control
2. OSD Menu Navigation  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 INF-5
3. Service Mode  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 INF-9
3. 1. Setting to Service Mode
3. 2. Resetting to User Mode
3. 3. Functions in Service Mode
4. External control  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 INF-14
4. 1. Control through Serial terminal
4. 2. Control through LAN terminal
4. 3. Control commands List
5. Notification for service operation  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 INF-20
5. 1. Before service operation
5. 2  Service
6 Troubleshooting  ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
 
INF-22
6. 1. Shutdown system
6. 2. System log data acquisition method
6. 3. Troubleshooting
CONTENTS
SECTION 1
SERVICE  INFORMATION
Model No.
PT-RZ670
PT-RW630
SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
1. The name of each part
  1. 1. Projector body
1
2
3
4
5
6
7
7
10
8
8
11
9
16
17
14
13
15
7
7
7
Front
Side
Rear
8
8
8
12
Projection direction
Bottom
1  Remote control signal receiver (front)
2  Power indicator <ON (G)/STANDBY (R)>
Displays the status of the power.
3  Light source indicator <LIGHT1>
Displays the status of light source 1.
4  Light source indicator <LIGHT2>
Displays the status of light source 2.
5  Temperature indicator <TEMP>
Displays the internal temperature status.
6  (Not available with this projector)
7 Adjustable 
feet
Adjusts the projection angle.
8  Air intake port
9 Projection 
lens
(Only models with lens)
10  Remote control signal receiver (rear)
11  Air exhaust port
12  Burglar hook port
Attaches a burglar prevention cable, etc.
13 Control 
panel
 
 
14 Connecting 
terminals
 
 
15 Security 
slot
This security slot is compatible with the Kensington security 
cables.
16  <MAIN POWER> switch
Turns on/off the main power.
17  <AC IN> terminal
Connect the supplied power cord.
Attention
 
f Do not block the ventilation ports (intake and exhaust) of the projector.
INF - 2
SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
  1. 2. Control panel
  1. 3. Connecting terminals
9
10
11
12
13
14
2
4
3
1
5
6
7
8
1  Power on <
b> button
Starts projection when the <MAIN POWER> switch on the 
projector is set to <ON> when the power is switched off 
(standby mode).
2  Power standby <
v> button
Sets the projector to the state where the projector is switched 
off (standby mode) when the <MAIN POWER> switch on the 
projector is set to <ON> and in projection mode.
3 <RGB1> 
button
Switches the input to RGB1.
4 <RGB2> 
button
Switches the input to RGB2.
5 <DVI-D> 
button
Switches the input to DVI-D.
6 <HDMI> 
button
Switches the input to HDMI.
7  <DIGITAL LINK> button
Switches the input to DIGITAL LINK.
8 <SDI> 
button
Switches the input to SDI.
(Only for PT-RZ670)
9 <MENU> 
button
Displays or hides the main menu. 
 
 
Returns to the previous menu when a sub-menu is displayed.
If you press the <MENU> button on the control panel for at least 
three seconds while the on-screen display is off (hidden), the 
on-screen display is turned on.
10 <LENS> 
button
Adjusts the focus, zoom, and shift (position) of the lens.
11 <ENTER> 
button
Determines and executes an item in the menu screen.
12 <SHUTTER> 
button
Used to temporarily turn off the image. 
 
 
13 
asqw buttons
Used to select items in the menu screen, change settings, and 
adjust levels.
Also used to enter a password in [SECURITY] or enter 
characters.
14  <AUTO SETUP> button
Automatically adjusts the image display position while projecting 
the image. [PROGRESS] is displayed while in automatic 
adjustment.
  
1
2
3
4
5
6
7
8
9
10
1  <REMOTE 1 IN> terminal/<REMOTE 1 OUT> terminal
These are the terminals to connect the remote control for serial 
control in a multiple projector environment.
2  <REMOTE 2 IN> terminal
This is a terminal to remotely control the projector using the 
external control circuit.
3  <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control 
the projector by connecting a computer.
4  <SERIAL OUT> terminal
This is a terminal to output the signal connected to the <SERIAL 
IN> terminal.
5  <SDI IN> terminal
This is the terminal to input SDI signals.
(Only for PT-RZ670)
6  <RGB 1 IN> (<R/P
R
/VIDEO>, <G/Y>, <B/P
B
/C>, <SYNC/HD>, 
<VD>) terminals
These are terminals to input RGB signals, YC
B
C
R
/YP
B
P
R
 
signals, Y/C signals, or video signals.
7  <RGB 2 IN> terminal
This is a terminal to input RGB signals or YC
B
C
R
/YP
B
P
R
 signals.
8  <DVI-D IN> terminal
This is the terminal to input DVI-D signals.
9  <HDMI IN> terminal
This is the terminal to input HDMI signals.
10  <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network. This is also 
used when connecting a video signal transmission device via 
the LAN terminal.
Attention
 
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
INF - 3
Page of 115
Display

Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man18) service manuals if exist.