DOWNLOAD Panasonic PT-RZ670 / PT-RW630 (serv.man18) Service Manual ↓ Size: 62.77 MB | Pages: 115 in PDF or view online for FREE

Model
PT-RZ670 PT-RW630 (serv.man18)
Pages
115
Size
62.77 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz670-pt-rw630-sm18.pdf
Date

Panasonic PT-RZ670 / PT-RW630 (serv.man18) Service Manual ▷ View online

SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
  1. 4. Remote control
1
3
2
4
5
7
6
8
9
10
15
12
11
13
14
16
17
Front
Top
Bottom
1  Power standby <
v> button
Sets the projector to the state where the projector is switched 
off (standby mode) when the <MAIN POWER> switch on the 
projector is set to <ON> and in projection mode.
2  Power on <
b> button
Starts projection when the <MAIN POWER> switch on the 
projector is set to <ON> when the power is switched off 
(standby mode).
3  Remote control indicator
Blinks if any button in the remote control is pressed.
4  Lens (<FOCUS>, <ZOOM>, <SHIFT>) buttons
Adjusts the projection lens. 
 
 
5  <MENU> button/<ENTER> button/
asqw buttons
Used to navigate through the menu screen. 
 
 
6  <ON SCREEN> button
Switches the on-screen display function on (display) or off 
(hide).  
 
7  Input selection (<RGB1/2>, <DIGITAL LINK>, <DVI-D>, 
<VIDEO>, <SDI>, <HDMI>) buttons
Switches the input signal to project. 
 
 
(SDI input is supported only for PT-RZ670.)
8 <FUNCTION> 
button
Assigns a frequently used operation as a shortcut button. 
 
 
9  Number (<0> - <9>) buttons
Used for entering an ID number or a password in a multiple 
projector environment.
10  <AUTO SETUP> button
Automatically adjusts the image display position while projecting 
the image.
[PROGRESS] is displayed while in automatic adjustment. 
11 <SHUTTER> 
button
Used to temporarily turn off the image.
 
12  <TEST PATTERN> button
Displays the test pattern. 
 
 
13 <STATUS> 
button
Displays the projector information.
14 <DEFAULT> 
button
Resets the content of the sub-menu to the factory default. 
15  <ID SET> button
Sets the ID number of the remote control in a multiple projector 
environment.  
 
16  Remote control signal transmitter
17  Remote control wired terminal
This is the terminal used to connect to the projector via a cable 
when used as a wired remote control.
 
 
Attention
 
f Do not drop the remote control.
 
f Avoid contact with liquids or moisture.
 
f Do not attempt to modify or disassemble the remote control.
Note
 
f When operating the remote control by directly pointing at the remote control signal receiver of the projector body, operate the remote 
control within a distance approx. 30 m (98'5") from the remote control signal receiver. The remote control can control at angles of up to ±30° 
vertically and horizontally, but the effective control range may be reduced.
 
f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.
 
f
 
f
. Use 
it in a place distant from the light source.
 
f The power indicator <ON (G)/STANDBY (R)> will blink if the projector receives a remote control signal.
 
f The operation of the <VIDEO> button is disabled in the factory default settings. The operation is enabled when [REMOTE CONTROL] is set 
to [USER] and [VIDEO BUTTON] of [INPUT SELECT BUTTON] is set to other than [DISABLE], from the [SECURITY] menu 
→ [CONTROL 
DEVICE SETUP]
 
 
INF - 4
SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
2. OSD Menu Navigation
Main menu
The following items are in the main menu.
When a main menu item is selected, the screen changes to a sub-menu selection screen.
Main menu item
[PICTURE]
[POSITION]
[ADVANCED MENU]
[DISPLAY LANGUAGE]
[DISPLAY OPTION]
[PROJECTOR SETUP]
[P IN P]
[TEST PATTERN]
[SIGNAL LIST]
[SECURITY]
[NETWORK]
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
[PICTURE] 
Sub-menu item
Factory default
[PICTURE MODE]
[STANDARD]
*1
[CONTRAST]
[0]
[BRIGHTNESS]
[0]
[COLOR]
[0]
[TINT]
[0]
[COLOR TEMPERATURE]
[DEFAULT]
[WHITE GAIN]
[+10]
[GAMMA]
[DEFAULT]
[SYSTEM DAYLIGHT VIEW]
[OFF]
[SHARPNESS]
[+6]
[NOISE REDUCTION]
[OFF]
[DYNAMIC CONTRAST]
[2]
[SYSTEM SELECTOR]
[YP
B
P
R
]
*1
*1  Depends on the signal input.
Note
 
f The factory default settings may vary depending on the picture mode.
INF - 5
SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
[POSITION] 
Sub-menu item
Factory default
[SHIFT]
[ASPECT]
[DEFAULT]
*1
[ZOOM]
[CLOCK PHASE]
[0]
*1
[GEOMETRY]
*2
[OFF]
[KEYSTONE]
*3
*1  Depends on the signal input.
*2 Only 
for 
PT-RZ670
*3 Only 
for 
PT-RW630
[ADVANCED MENU] 
Sub-menu item
Factory default
[DIGITAL CINEMA REALITY]
[AUTO]
*1
[BLANKING]
[INPUT RESOLUTION]
[CLAMP POSITION]
[24]
*1
[EDGE BLENDING]
[OFF]
[FRAME RESPONSE]
[NORMAL]
[RASTER POSITION]
*1  Depends on the signal input.
Note
 
f Sub-menu items and factory default settings vary depending on the selected input terminal.
[DISPLAY LANGUAGE] 
f Select the language of the on-screen display.
    The language can be changed to English, German, French, Spanish, Italian, Portuguese, Japanese, Chinese, Russian, or Korean.
 
 
[DISPLAY OPTION] 
Sub-menu item
Factory default
[COLOR MATCHING]
[OFF]
[COLOR CORRECTION]
[OFF]
[SCREEN SETTING]
[AUTO SIGNAL]
[OFF]
[AUTO SETUP]
[BACKUP INPUT SETTING]
[RGB IN]
[DVI-D IN]
[HDMI IN]
[DIGITAL LINK IN]
[SDI IN]
*1
[ON-SCREEN DISPLAY]
[CLOSED CAPTION SETTING]
[IMAGE ROTATION]
[OFF]
[BACK COLOR]
[BLUE]
[STARTUP LOGO]
[DEFAULT LOGO]
[UNIFORMITY]
[SHUTTER SETTING]
[FREEZE]
[WAVEFORM MONITOR]
[OFF]
[CUT OFF]
*1 Only 
for 
PT-RZ670
INF - 6
SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
[PROJECTOR SETUP] 
Sub-menu item
Factory default
[PROJECTOR ID]
[ALL]
[PROJECTION METHOD]
[FRONT/FLOOR]
[COOLING CONDITION]
[AUTO]
[HIGH ALTITUDE MODE]
[UNDER 2700m]
[OPERATION SETTING]
[LIGHT OUTPUT]
[100.0%]
[BRIGHTNESS CONTROL]
[STANDBY MODE]
[NORMAL]
[SCHEDULE]
[OFF]
[STARTUP INPUT SELECT]
[LAST USED]
[RS-232C]
[STATUS]
[NO SIGNAL SHUT-OFF]
[DISABLE]
[REMOTE2 MODE]
[DEFAULT]
[FUNCTION BUTTON]
[DATE AND TIME]
[LENS CALIBRATION]
[SAVE ALL USER DATA]
[LOAD ALL USER DATA]
[INITIALIZE]
[SERVICE PASSWORD]
[P IN P] 
f Locate a separate, small sub screen in the main screen to project two images simultaneously.
 
 
[TEST PATTERN] 
f Display the test pattern built-in to the projector.
    All white, All black, Window, Window(inversion), Color bar(vertical), Color bar(horizontal), 16:9/4:3aspect frame,  Focus
 
 
[SIGNAL LIST] 
f Registered signal list is displayed.
    Registering new signals, Renaming the registered signal, Deleting the registered signal, Protecting the registered signal,
    Expanding signal lock-in range, Registering to the sub memory, Deleting the sub memory
 
 
[SECURITY] 
Sub-menu item
Factory default
[SECURITY PASSWORD]
[OFF]
[SECURITY PASSWORD CHANGE]
[DISPLAY SETTING]
[OFF]
[TEXT CHANGE]
[CONTROL DEVICE SETUP]
[CONTROL DEVICE PASSWORD CHANGE]
INF - 7
Page of 115
Display

Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man18) service manuals if exist.