DOWNLOAD Panasonic PT-RZ670 / PT-RW630 (serv.man13) Service Manual ↓ Size: 17.23 MB | Pages: 20 in PDF or view online for FREE

Model
PT-RZ670 PT-RW630 (serv.man13)
Pages
20
Size
17.23 MB
Type
PDF
Document
Service Manual / Other
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz670-pt-rw630-sm13.pdf
Date

Panasonic PT-RZ670 / PT-RW630 (serv.man13) Service Manual / Other ▷ View online

SECTION 2  DISASSEMBLY PROCEDURES
< RZ670/RW630 >
  2. 3. Removal of Top Case
1. Remove the projection lens. (* Move the lens to the home position before removing the projection lens.)
1) Turn the Lens Ring counterclockwise and remove.
2) While keep pressing the lens release button, turn the projection lens counterclockwise to the end and remove.
2. Unscrew the 7 screws.
    Slide and remove the top case.
  2. 4. Removal of Side cover (L) / Side cover (R) / Front cover / Rear cover
1. Remove the Top case according to the section 2.3 "Removal of Top Case".
2. Unscrew the 6 screws and remove the side cover (L).
Lens Ring
Lens release button
Projection Lens
Top case
Side cover (L)
6  
1  
6  
DIS-7
SECTION 2  DISASSEMBLY PROCEDURES
< RZ670/RW630 >
3. Unscrew the 3 screws and remove the side cover (R).
4. Release the hooks (4 places), and then remove the front cover.
5. Release the hooks (4 places), and then remove the rear cover.
  2. 5. Removal of Signal Processing Block (DG-P.C.Borad / A-P.C.Board)
1. Remove the side cover (L) according to the section 2.4 "Removal of Side cover (L) / Side cover (R) / Front cover / 
    Rear cover".
2. Unscrew the 3 screws and remove the signal processing block.
  
Side cover (R)
Front cover
Rear cover
Signal Processing Block
3  
3  
DIS-8
SECTION 2  DISASSEMBLY PROCEDURES
< RZ670/RW630 >
3. 1) Remove the fixing screws of the each terminals. (6 screws)
    2) Unscrew the 5 screws and remove the DG-P.C.Board.
The DG-P.C.Board is directly connected to the A-P.C.Board with the connector. Be careful when removing.
    3) Unscrew the 1 screw and remove the M1-P.C.Board.
4. 1) Remove the fixing screws of the each terminals. (8 screws)
    2) Unscrew the 5 screws and remove the A-P.C.Board.
  2. 6. Removal of LD Driver Block (D-P.C.Board / DR-P.C.Board)
1. Remove the signal processing block according to the section 2.5 "Removal of Signal Processing Block
     (DG-P.C.Board / A-P.C.Board)".
2. Unscrew the 3 screws and remove the Exhaust fan block.
Note :
DG-P.C.Board
M1-P.C.Board
Terminal metal panel
Terminal metal panel
A-P.C.Board
Exhaust fan Block
5  
1  
6  
5  
1  
2  
4  
1  
3  
DIS-9
SECTION 2  DISASSEMBLY PROCEDURES
<RZ670J/RW630J>
3. Unscrew the 5 screws and remove the LD drive block.
4. 1) Remove the 2 clamps and remove the Sheet1.
    2) Unscrew the 2 screws and remove the DR-P.C.Board.
5. Unscrew the 4 screws and remove the D-P.C.B top plate.
LD drive block
Sheet1
DR-P.C.Board
D-P.C.B. top plate
5  
2  
4  
DIS-10
Page of 20
Display

Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man13) service manuals if exist.