DOWNLOAD Panasonic PT-RZ670 / PT-RW630 (serv.man13) Service Manual ↓ Size: 17.23 MB | Pages: 20 in PDF or view online for FREE

Model
PT-RZ670 PT-RW630 (serv.man13)
Pages
20
Size
17.23 MB
Type
PDF
Document
Service Manual / Other
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz670-pt-rw630-sm13.pdf
Date

Panasonic PT-RZ670 / PT-RW630 (serv.man13) Service Manual / Other ▷ View online

SECTION 2  DISASSEMBLY PROCEDURES
< RZ670/RW630 >
1. Parts Location
  1. 1. Electrical parts location (P.C.Board)
 LD1 Drive / LD2 Drive
  1. 2. Electrical parts location (Fan)
Board Name
Function summary
Board Name
Function summary
A
P
 Image processing system / CPU
 Power supply (DC-DC)
 LD Control
 AC Inlet
 DMD drive
RM
DR
RT
M1
 Temperature sensor (Intake/Exhaust)
 Relay Board (Lens Mounter)
 Relay Board (Lighting block 2)
DG
 Digital signal processing / GEOMETRY
K
S
D
 Control Panel
 Relay Board (Lighting block 1)
 Rear IR Receiver
R
CW
 Wheel sensor (Hhosphor 1/2, Trim)
BR
FM
RB
 Front IR Receiver / Status LED
M3
 Color Sensor
M1(Int)
BR
LD UNIT x8
R
P
FM
M3
M1(Ext)
RT
D(LD1)
D(LD2)
S
DG
A
RM
CW
K
CW
CW
RB
DR
LD DRIVER FAN 
EXHAUST1 FAN 
POWER FAN 
RADIATOR3 FAN 
TRIMING WHEEL 
EXHAUST3 FAN 
EXHAUST2 FAN 
DMD FAN 
PHOSPHOR2 WHEEL 
PHOSPHOR1 WHEEL 
PHOSPHOR2 FAN 
PHOSPHOR1 FAN 
RADIATOR2 FAN 
RADIATOR1 FAN 
DIS-2
SECTION 2  DISASSEMBLY PROCEDURES
< RZ670/RW630 >
  1. 3. Mechanism element parts location
  1. 4. Optical parts location
Power Supply Block
Signal Processing Block
Top Case
Side cover (L)
Front cover
Side cover (R)
Radiator fan
Block
Exhaust fan Block
Rear cover
LD Drive Block
Lens cover
DMD block
Rod cover block
Trim cover block
Rod
Color sensor
Lighting block 2
Lighting block 1
Liquid cooling unit
Liquid cooling unit
LD block
(LD2-3/LD2-4)
LD block
(LD1-3/LD1-4)
LD block
(LD1-1/LD1-2)
LD block
(LD2-1/LD2-2)
DIS-3
SECTION 2  DISASSEMBLY PROCEDURES
< RZ670/RW630 >
2. Disassembly Instructions
・ Hex driver (2.72mm : For Removal of Top case)
- Parts number : TZSH07035
・ Hex driver (3.94mm : For Removal of Lighting block )
- Parts number : TZSH07042
  2. 1. Notes on disassembly and assembly
    2. 1. 1. Disassembly and assembly operation
1. Before disassembly of the projector, turn off the power switch and disconnect the power plug from the wall outlet.
2. During the disassemble work, please wear gloves to protect your hands from metal parts and shield plate.
3. Electrocal parts such as PCBs, may get damaged by electro-statics discharge and/or surges which affects the set
reliability. Please take care for electro-static discharges by using grounded wrist straps to release the electricity from
the body.
4. When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
5. After assembly, make sure that all the connectors are connected completely. 
6. Especially, pay attention for the connection of the connectors on the LD unit. If the projector is turned on in the state
of the connectors disconnected, the LD error will occur and be memorized in the memory. The error information will
not be reset even if the connector is re-connected correctly. In this case, you need to take the runtime reset of its LD
unit by the LD reset software. (The LD error information will also be reset.)
    2. 1. 2. Removal and insert procedure of flexible cable
For connecting or disconnecting the flexible cables *
1
, please perform the following procedure.
 *1  Flexible cables: Connector DG3/DG4 on DG P.C.Board 
 Connector FM1/FM2 on FM P.C.Board
1. Push the unlock buttons of FFC connectors in the direction of arrows.
2. Push and hold the unlock buttons.
Gently pull the flexible cable in parallel to the P.C.Board.
Tools
Removal procedure
< Image>
Push the two unlock buttons at the same time.
Don't push buttons slantingly.
Gently pull the flexible cable
in parallel to the P.C.Board.
Push and hold the unlock buttons.
Gently pull the flexible cable.
DIS-4
SECTION 2  DISASSEMBLY PROCEDURES
< RZ670/RW630 >
1. Keep down the terminal side of the flexible cable. Set the flexible cable to the center of connector.
2. Gently insert the flexible cable in parallel to the P.C.Board.
Please insert the flexible cable until the clicking sound is heard.
In case of not following procedure, the terminal of flexible cable is peeling and loose connection occurs.
Symptom for this issue
・ Does not start. The trim wheel is not rotated and the light sources does not light.
・ Screen noise occur. Vertical line noise etc. 
[Note]
Insert procedure
<Image>
<Sample>
If terminal is peeling, 
please replace the flexible cable to new one.
Set the flexible cable 
to the center of connector.
Do not set the connecting 
pattern up.
Gently insert the flexible cable
in parallel to the P.C.Board.
In the case of diagonal condition,
the flexible cable is not locked.
Loose connection occurs.
DIS-5
Page of 20
Display

Panasonic PT-RZ670 / PT-RW630 (serv.man13) Service Manual / Other ▷ Download

  • DOWNLOAD Panasonic PT-RZ670 / PT-RW630 (serv.man13) Service Manual ↓ Size: 17.23 MB | Pages: 20 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Other for the Panasonic PT-RZ670 / PT-RW630 (serv.man13) in PDF for free, which will help you to disassemble, recover, fix and repair Panasonic PT-RZ670 / PT-RW630 (serv.man13) Projector. Information contained in Panasonic PT-RZ670 / PT-RW630 (serv.man13) Service Manual / Other (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.