DOWNLOAD Panasonic PT-RZ120 (serv.man2) Service Manual ↓ Size: 34.64 MB | Pages: 101 in PDF or view online for FREE

Model
PT-RZ120 (serv.man2)
Pages
101
Size
34.64 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz120-sm2.pdf
Date

Panasonic PT-RZ120 (serv.man2) Service Manual ▷ View online

ADJ-13
SECTION 3 ADJUSTMENTS
< RZ120 >
6. Click the [Reset] button corresponding to the replaced LD unit No.
7. If the LD unit number to be reset in the confirmation window is correct, click the [OK] button.
8. When the reset completion window is displayed, click the [OK] button.
   Confirm that the runtime of LD unit is "0h".
9.  After completing the work, turn the main switch off and on again. 
Enter the service mode and confirm that its LD unit runtime is reset on the [STATUS] menu.
Display example of LD1-1 reset
Display example of LD1-1 reset
ADJ-14
SECTION 3 ADJUSTMENTS
< RZ120 >
2. Firmware update procedure
f
  Firmware updating can be done via the LAN terminal or the serial terminal. 
   DIGITAL LINK firmware can be done via the serial terminal only.
f
 It is recommended to use the LAN terminal for updating the firmware.(updating speed is faster than serial terminal)
2. 1. Equipment to be used
1. Computer : Use it for firmware transferring
2. Communication cable : 
    
Serial terminal connection
D-sub 9pin (male/female RS-232C straight)
LAN terminal connection
LAN cable. (When connecting directly, use a cross cable)
3. Service Software : [MainSubNtUpdateTool.exe ]      Download from the projector service website.
4. Firmware software : Download the firmware file from the projector service website to the PC.
2. 2. Connection Preparations
1. Check the settings of the projector.
  Serial terminal connection
  1)  The [INPUT SELECT] of sub menu [RS-232C] in [PROJECTOR SETUP] must be set according to the connection meth-
od.
  2) Check the RS-232C settings (ID, Baudrate and Parity) and take a note.
 
 
LAN terminal connection
  1) Set the [DIGITAL LINK MODE] in the submenu [NETWORK] to [AUTO] or [ETHERNET].
  2) Check the projector IP address in [NETWORK STATUS] of the submenu [NETWORK] and take a note.
  3) Set the IP address of computer to approximate (same network group) value of the projector IP address.
  
• If you have changed the each menu settings, please return settings to the original (customers) after work.
2. Connect the projector and the PC by using a communication cable.
 
Serial terminal connection example
LAN terminal connection example
Projector SERIAL IN
Communication cable (straight)
Computer
D-Sub 9P
(male)
D-Sub 9p (female)
LAN cable (straight)
LAN cable (straight)
Projector LAN
Computer
Hub
2. 3. Update procedure
1. Switch the projector to "Normal-Standby" mode (ON/STANDBY indicator is lighting in red).
2. Start up service software [MainSubNet Update Tool.exe] with a computer.
ADJ-15
SECTION 3 ADJUSTMENTS
< RZ120 >
4.  Select connection (LAN or Serial) method and enter the setting information of the projector.
  Serial terminal connection
  • Select [SERIAL] menu and set up the Serial Port, Baudrate and Parity of the PC.
    
 
 
LAN terminal connection
  • Select [LAN] menu and set up the IP address of the projector.
 
•  Setting of Username, Password, Command Port is unnecessary.
3. Select the model number in the following way and click the [OK] button.
  1) Model selection by keyword search
    • Select "Manual Select" and enter all or part of model name in the "Keyword" frame.
  2)  Model selection by network search
    •  Select "Network Selection" and select the IP address of the computer and click the [Search] button to display a list of 
the connected projectors in the network.
Items
Default
SERIAL
Port
Baud Rate
9600bps
Parity
None
LAN
IP Address
192.168.0.8
Username
dispadmin
Password
@Panasonic
Command Port 1024
ADJ-16
SECTION 3 ADJUSTMENTS
< RZ120 >
5. When the connection setup is completed, click the [Connection Check] button and check the connection with projector.
      • If "Check : OK" is displayed, click the [OK] button and proceed to the next step.
      • If "Check : NG" is displayed, check the setting in step 4.
6. Click [load] button which you want to firmware update in the "Select Microcomputer's firmware file" frame.
7. Select the new firmware, and click [Open] button.
• LAN connection
• Serial connection
Page of 101
Display

Click on the first or last page to see other PT-RZ120 (serv.man2) service manuals if exist.