Panasonic PT-RZ120 (serv.man2) Service Manual ▷ View online
7
PREFACE
< RZ120 >
2. Specifications
2. 1 Specifications
•
The specifications of the projector are as follows.
Power supply
100 V - 240 V ~ (100 V - 240 V alternating current), 50 Hz/60 Hz
Power consumption
1 100 W (11 A - 4.5 A)
Power consumption (during
standby)
When [STANDBY MODE] is set to [ECO]: Approx. 0.5 W
When [STANDBY MODE] is set to [NORMAL]: Approx. 7 W
When the [QUICK STARTUP] function is enabled: Approx. 100 W
When [STANDBY MODE] is set to [NORMAL]: Approx. 7 W
When the [QUICK STARTUP] function is enabled: Approx. 100 W
DLP chip
Size
17 mm (0.67") (aspect ratio 16:10)
Display system
DLP chip x 1, DLP projection system
Number of pixels 2 304 000 pixels (1 920 x 1 200 dots)
Lens
*1
Electric zoom
1.7 to 2.4:1
Electric focus
F = 1.7 to 1.9
f = 25.6 mm to 35.7 mm
Light source
Laser light source, 2 sets
Light output
*2
12 000 lm
*3
(When [OPERATING MODE] in [OPERATION SETTING] is set to [NORMAL])
Center to corner zone ratio
*3
90 %
Contrast ratio
*3
10 000:1 (when [DYNAMIC CONTRAST] is set to [3])
Projected image size
*4
1.27 m (50") to 15.24 m (600")
Image aspect ratio
16:10
Projection method
[FRONT]/[FLOOR], [FRONT]/[CEILING], [REAR]/[FLOOR], [REAR]/[CEILING]
Power cord length
3.0 m (118-1/8")
Outer case
Molded plastic
Outer color
Black model
Black
White model
White
Dimensions
Width
498 mm (19-19/32")
Height
200 mm (7-7/8") (with legs at shortest position)
Depth
PT-RZ120
581 mm (22-7/8") (including standard zoom lens)
PT-RZ120L
538 mm (21-3/16") (excluding the Lens Mount Cover
and optional lens)
Weight
PT-RZ120
Approx. 23.6 k] (51.9 lbs.)
*5
(including standard zoom
lens)
PT-RZ120L
Approx. 22.8 k] (50.2 lbs.)
*5
(excluding the Lens Mount
Cover and optional lens)
Noise level
*3
44 dB
When [OPERATING MODE] in [OPERATION
SETTING] is set to [NORMAL]
41 dB
When [OPERATING MODE] in [OPERATION
SETTING] is set to [QUIET1]
38 dB
When [OPERATING MODE] in [OPERATION
SETTING] is set to [QUIET2]
Laser
Classification
Laser Class
USA and Canada: Class 3R (IEC 60825-1:2007)
Other countries or regions: Class 1 (IEC/EN 60825-1:2014)
Other countries or regions: Class 1 (IEC/EN 60825-1:2014)
Risk Group
ET-DLE035, ET-DLE055, ET-DLE060,
ET-DLE085, ET-DLE105, ET-DLE150,
ET-DLE170
Risk Group 2 (IEC 62471-5:2015)
ET-DLE250, ET-DLE350, ET-DLE450
Risk Group 3 (IEC 62471-5:2015)
Operating
environment
Operating
environment
temperature
*6
0 °C (32 °F) to 45 °C (113 °F)
Operating
environment
humidity
10 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AAA/R03/LR03 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
Weight
102 ] (3.6 ozs.) (including batteries)
Dimensions
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
8
PREFACE
< RZ120 >
*4 When the lens ET-DLE055 is used, the maximum size is 5.08 m (200"). When the lens ET-DLE035 is used, the maximum size is 2.54 m (100") to
8.89 m (350").
*5 Average value. Weight varies for each product.
*6 When using the projector at an altitude lower than 2 700 m (8 858') above sea level, and the operating environment temperature becomes 30 °C
(86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2 700 m (8 858') and
4 200 m (13 780'), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the
projector.
<RGB 1 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
x 1))
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<RGB 2 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP 2.2 compatible, Deep Color compatible
<SDI IN> terminal
1 set (BNC)
SD-SDI signal
SD-SDI signal
SMPTE ST 259 compliant
HD-SDI signal
SMPTE ST 292 compliant
3G-SDI signal
SMPTE ST 424, 425-2 compliant
<SERIAL/MULTI PROJECTOR
SYNC IN>/ <SERIAL/MULTI
PROJECTOR SYNC OUT>
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/ <REMOTE 1
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK/LAN> terminal 1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
TM
compliant), PJLink (class 2)
compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
<LAN> terminal
1 set, RJ-45, for network connection, PJLink (class 2) compatible, 10Base-T/100Base-TX, Art-Net
compatible
Note
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
*1 The lens for PT-RZ120L series is sold separately.
*2 Value is for the supplied standard zoom lens. The value varies depending on the lens.
*3 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
2. 2 Connecting terminal
9
PREFACE
< RZ120 >
RGB input
f
Resolution: 640 x 400 to 1 920 x 1 200
f
Dot clock frequency: 162 MHz or less
f
PIAS (Panasonic Intelligent Auto Scanning) system
YC
B
C
R
/YP
B
P
R
input
f
Resolution: 480i/576i to 1 920 x 1 080
f
Dot clock frequency: 148.5 MHz or less
f
The HD/SYNC and VD terminals do not support 3 value SYNC.
DVI-D input
f
Moving image signal resolution: 480i
*1
/576i
*1
to 1 920 x 1 080
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f
Dot clock frequency: 25 MHz to 162 MHz
HDMI input
f
Moving image signal resolution: 480i
*1
/576i
*1
to 4 096 x 2 160
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f
Dot clock frequency: 25 MHz to 594 MHz
DIGITAL LINK input
f
Moving image signal resolution: 480i
*1
/576i
*1
to 4 096 x 2 160
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f
Dot clock frequency: 25 MHz to 297 MHz
SDI input
SD-SDI signal
HD-SDI signal
3G-SDI signal
SD-SDI signal
HD-SDI signal
3G-SDI signal
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
2. 3 Compatible signal
• For details of the types of video signals that can be used with the projector, refer to operating Instructions “List of compatible signals”
10
PREFACE
< RZ120 >
2. 4. Dimensions
Unit: mm
221 (8-11/16")
249 (9-13/16")
498 (19-19/32")
457 (18")
442 (17-13/32")
20.5 (13/16")
115.5 (4-9/16")
200 (7-7/8")
43 (1-11/16")
538 (21-3/16")
* The above dimensions are obtained when the standard zoom lens is attached.
* Actual dimensions may differ depending on the product.
Click on the first or last page to see other PT-RZ120 (serv.man2) service manuals if exist.