DOWNLOAD Panasonic PT-RZ120 (serv.man2) Service Manual ↓ Size: 34.64 MB | Pages: 101 in PDF or view online for FREE

Model
PT-RZ120 (serv.man2)
Pages
101
Size
34.64 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / 1-CHIP DLP BASED PROJECTOR
File
pt-rz120-sm2.pdf
Date

Panasonic PT-RZ120 (serv.man2) Service Manual ▷ View online

INF-4
SECTION 1 SERVICE INFORMATION
< RZ120 >
1. 3. Control panel
9
10
11
12
13
14
2
4
3
1
5
6
7
8
1  Power on <b> button
Sets the projector to projection mode when the <MAIN 
POWER> switch on the projector is set to <ON> and the power 
is turned off (standby mode).
2  Power standby <v> button
Sets the projector to the state where the projector is turned 
off (standby mode) when the <MAIN POWER> switch on the 
projector is set to <ON> and in projection mode.
3  <RGB1> button
Switches the input to RGB1.
4  <RGB2> button
Switches the input to RGB2.
5  <DVI-D> button
Switches the input to DVI-D.
6  <HDMI> button
Switches the input to HDMI.
7  <DIGITAL LINK> button
Switches the input to DIGITAL LINK.
8  <SDI> button
Switches the input to SDI.
9  <MENU> button
Displays or hides the main menu. 
Returns to the previous menu when a sub-menu is displayed. 
If you press the <MENU> button on the control panel for at least 
three seconds while the on-screen display is off (hidden), the 
on-screen display is turned on.
10  <LENS> button
Adjusts the focus, zoom, and lens shift.
11  <ENTER> button
Determines and executes an item in the menu screen.
12  <SHUTTER> button
       Used to temporarily turn off the image. 
13  asqw selection buttons
Used to select an item in the menu screen, change the setting, 
and adjust the level.
Also used to enter a password in [SECURITY] or enter 
characters.
14  <AUTO SETUP> button
Automatically adjusts the image display position while the 
image is projected. [PROGRESS] is displayed during the 
automatic adjustment.
INF-5
SECTION 1 SERVICE INFORMATION
< RZ120 >
1. 4. Connecting terminals
1
2
3
4
5
6
7
8
9
10
11
1  <REMOTE 1 IN> terminal/<REMOTE 1 OUT> terminal
These are terminals to connect the remote control for serial 
control in a multiple projector environment.
2  <REMOTE 2 IN> terminal
This is a terminal to remotely control the projector using the 
external control circuit.
3  <SERIAL/MULTI PROJECTOR SYNC IN> terminal
This is the RS-232C compatible terminal to externally control 
the projector by connecting a computer.
This terminal is also used to connect multiple projectors when 
balancing the contrast as a combined screen or synchronizing 
the effects using the shutter function including the fade in/fade 
out with a system using multiple projectors.
4  <SERIAL/MULTI PROJECTOR SYNC OUT> terminal
This is a terminal to output RS-232C compliant signal input to 
the <SERIAL/MULTI PROJECTOR SYNC IN> terminal.
This terminal is also used to connect multiple projectors when 
balancing the contrast as a combined screen or synchronizing 
the effects using the shutter function including the fade in/fade 
out with a system using multiple projectors.
5  <SDI IN> terminal
This is a terminal to input the SDI signal.
6  <RGB 1 IN> terminals (<R/P
R
>, <G/Y>, <B/P
B
>, <SYNC/HD>, 
<VD>)
These are terminals to input the RGB signal or YC
B
C
R
/YP
B
P
R
 
signal.
7  <RGB 2 IN> terminal
This is a terminal to input the RGB signal or YC
B
C
R
/YP
B
P
R
 
signal.
8  <DVI-D IN> terminal
This is a terminal to input the DVI-D signal.
9  <HDMI IN> terminal
This is a terminal to input the HDMI signal.
10  <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network. This is also 
used when connecting a video signal transmission device via 
the LAN terminal.
11  <LAN> terminal
This is a terminal to connect a device that transmits video 
signal or audio signal via the LAN terminal. Also, this is the LAN 
terminal to connect to the network.
Attention
 
f
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
 
f
The <DIGITAL LINK/LAN> terminal and <LAN> terminal are connected inside of the projector. If both the <DIGITAL LINK/LAN> terminal and 
<LAN> terminal are used, configure the system so that these terminals are not directly connected or connected through peripheral devices 
such as a hub or a twisted-pair-cable transmitter to the same network.
INF-6
SECTION 1 SERVICE INFORMATION
< RZ120 >
2. Menu Navigation
Main menu
The following items are in the main menu.
When a main menu item is selected, the screen changes to a sub-menu selection screen.
The menu item with l in the [SIMPLE] mode column indicates that this is displayed in the menu screen (OSD) 
when the [DISPLAY OPTION] menu → [MENU MODE] is set to [SIMPLE].
Main menu item
[SIMPLE] mode
[PICTURE]
l
[POSITION]
l
[ADVANCED MENU]
[DISPLAY LANGUAGE]
l
[DISPLAY OPTION]
l
[PROJECTOR SETUP]
l
[TEST PATTERN]
l
[SIGNAL LIST]
l
[SECURITY]
[NETWORK]
l
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu.
The menu item with l in the [SIMPLE] mode column indicates that this is displayed in the menu screen (OSD) 
when the [DISPLAY OPTION] menu → [MENU MODE] is set to [SIMPLE].
[PICTURE] 
Sub-menu item
Factory default
[SIMPLE] mode
[PICTURE MODE]
[GRAPHIC]
*1
l
[CONTRAST]
[0]
l
[BRIGHTNESS]
[0]
l
[COLOR]
[0]
*2
l
[TINT]
[0]
[COLOR TEMPERATURE]
[DEFAULT]
*2
[WHITE GAIN]
[+10]
[GAMMA]
[DEFAULT]
[SYSTEM DAYLIGHT VIEW]
[OFF]
*2
[SHARPNESS]
[+6]
*2
[NOISE REDUCTION]
[OFF]
*2
[DYNAMIC CONTRAST]
[2]
*2
[SYSTEM SELECTOR]
[YP
B
P
R
]
*1
[DEFAULT PICTURE MODE]
[AUTO]
*1  Depends on the signal input.
*2  Depends on the [PICTURE MODE].
 
INF-7
SECTION 1 SERVICE INFORMATION
< RZ120 >
 [POSITION]
Sub-menu item
Factory default
[SIMPLE] mode
[SHIFT]
[ASPECT]
[DEFAULT]
*1
l
[ZOOM]
[CLOCK PHASE]
[0]
*1
[GEOMETRY]
[OFF]
l
*1  Depends on the signal input.
[ADVANCED MENU]
Sub-menu item
Factory default
[SIMPLE] mode
[DIGITAL CINEMA REALITY]
[AUTO]
*1
[BLANKING]
[INPUT RESOLUTION]
[CLAMP POSITION]
[24]
*1
[EDGE BLENDING]
[OFF]
[FRAME RESPONSE]
[NORMAL]
[RASTER POSITION]
*1  Depends on the signal input.
[DISPLAY LANGUAGE] 
[DISPLAY OPTION] 
Sub-menu item
Factory default
[SIMPLE] mode
[COLOR MATCHING]
[OFF]
l
[COLOR CORRECTION]
[OFF]
[SCREEN SETTING]
l
[AUTO SIGNAL]
[OFF]
[AUTO SETUP]
[BACKUP INPUT SETTING]
[RGB IN]
[DVI-D IN]
[HDMI IN]
[DIGITAL LINK IN]
[SDI IN]
[ON-SCREEN DISPLAY]
l
[MENU MODE]
[NORMAL]
l
[IMAGE ROTATION]
[OFF]
[BACK COLOR]
[BLUE]
[STARTUP LOGO]
[DEFAULT LOGO]
l
[UNIFORMITY]
[SHUTTER SETTING]
[FREEZE]
[WAVEFORM MONITOR]
[OFF]
[CUT OFF]
f
 You can select the language of the on-screen display.
f
 The language can be changed to English, German, French, Spanish, Italian, Portuguese, Japanese, Chinese, 
Russian, or Korean.
Page of 101
Display

Click on the first or last page to see other PT-RZ120 (serv.man2) service manuals if exist.