PT-RQ13K (serv.man2) — Panasonic Projector Service Manual (repair manual). Page 8

View Panasonic PT-RQ13K (serv.man2) Service Manual online

8
PREFACE
< RQ13K >
2.2 Connecting terminal/slot
<SDI IN 1> terminal
<SDI IN 2> terminal
<SDI IN 3> terminal
<SDI IN 4> terminal
Total 4 sets (BNC)
Single link SD-SDI signal
Single link HD-SDI signal
Single link 3G-SDI signal
Dual link HD-SDI signal
SMPTE ST 372 compliant
<SDI IN 1> terminal: LINK-A signal/<SDI IN 2> terminal: LINK-B 
signal/<SDI IN 3> terminal: LINK-A signal/<SDI IN 4> terminal: 
LINK-B signal
Dual link 3G-SDI signal
SMPTE ST 425 compliant
<SDI IN 1> terminal: Link 1 signal/<SDI IN 2> terminal: Link 2 
signal/<SDI IN 3> terminal: Link 1 signal/<SDI IN 4> terminal: Link 
2 signal
Quad link HD-SDI signal
<SDI IN 1> terminal: Link 1 signal/<SDI IN 2> terminal: Link 2 
signal/<SDI IN 3> terminal: Link 3 signal/<SDI IN 4> terminal: Link 
4 signal
Quad link 3G-SDI signal
SMPTE ST 425 compliant
<SDI IN 1> terminal: Link 1 signal/<SDI IN 2> terminal: Link 2 
signal/<SDI IN 3> terminal: Link 3 signal/<SDI IN 4> terminal: Link 
4 signal
<FRAME SYNC 1 IN/OUT> 
terminal
1 set (BNC)
During input setting
TTL high impedance
During output setting
TTL output: Maximum 10 mA
<FRAME SYNC 2 OUT> 
terminal
1 set (BNC)
TTL output: Maximum 10 mA
<SERIAL IN> terminal
<SERIAL OUT> terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN> terminal
<REMOTE 1 OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK/LAN> terminal 1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
TM
 compliant), PJLink compatible, 
100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
<SLOT 1>
<SLOT 2>
Page of 127
Display

Click on the first or last page to see other PT-RQ13K (serv.man2) service manuals if exist.