Panasonic PT-RCQ10 / PT-RCQ80 (serv.man3) Service Manual ▷ View online
10
PREFACE
< RCQ10 / RCQ80 >
Remote
control
Power supply
DC 3 V (AAA/R03/LR03 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
Weight
102 ] (3.6 ozs.) (including batteries)
Dimensions
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1 The lens for PT-RCQ10L series and PT-RCQ80L series is sold separately.
*2 Value is for the supplied standard zoom lens. The value varies depending on the lens.
*3 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*4 When the lens ET-DLE055 is used, the maximum size is 5.08 m (200"). When the lens ET-DLE035 is used, the maximum size is 2.54 m (100") to
8.89 m (350").
*5 Average value. Weight varies for each product.
*6 When using the projector at an altitude lower than 2 700 m (8 858') above sea level, and the operating environment temperature becomes 30 °C
(86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2 700 m (8 858') and
4 200 m (13 780'), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the
projector.
Note
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP 2.2 compatible, Deep Color compatible
<SDI IN> terminal
1 set (BNC)
HD-SDI signal
HD-SDI signal
SMPTE ST 292 compliant
3G-SDI signal
SMPTE ST 424, 425-2 compliant
<MULTI PROJECTOR SYNC
IN> terminal
1 set (BNC)
TTL high impedance
<MULTI PROJECTOR SYNC
OUT> terminal
1 set (BNC)
TTL output: Maximum 10 mA
<SERIAL IN>/ <SERIAL OUT>
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/ <REMOTE 1
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK> terminal
1 set, RJ-45, for network and DIGITAL LINK connections (HDBaseT
TM
compliant), PJLink (class 2)
compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible
<LAN> terminal
1 set, RJ-45, for network connection, PJLink (class 2) compatible, 10Base-T/100Base-TX, Art-Net
compatible
Slot
1 set (blank), SLOT NX specification, for installing the Interface Board
<USB> terminal
1 set, USB connector (type A), for connecting the optional Wireless Module (Model No.: AJ-WM50 Series),
for connecting USB memory, for power supply (DC 5 V, maximum 500 mA)
Compliance standards
IEEE802.11b/g/n
Transmission method
DSSS, OFDM
Frequency range
(Channel)
2 412 MHz to 2 462 MHz (1 to 11ch)
Data transfer speed
(Standard value)
IEEE802.11n
Maximum 144 Mbps
IEEE802.11g
Maximum 54 Mbps
IEEE802.11b
Maximum 11 Mbps
Encryption method
WPA2-PSK (AES)
2. 2 Connecting terminal / slot
2. 3 Wireless LAN
To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module (Model No.:
AJ-WM50 Series).
11
PREFACE
< RCQ10 / RCQ80 >
2. 4 Compatible signal
• For details of the types of video signals that can be used with the projector, refer to operating Instructions “List of compatible signals”
HDMI signal input
f
Moving image signal resolution: 480/60p, 576/50p to 4 096 x 2 160
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
f
Dot clock frequency: 25 MHz to 594 MHz
DVI-D signal input
f
Moving image signal resolution: 480/60p, 576/50p to 1 920 x 1 080
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
Still image signal resolution: 640 x 480 to 1 920 x 1 200 (non-interlace)
f
Dot clock frequency: 25 MHz to 162 MHz
SDI signal input
HD-SDI signal
3G-SDI signal
6G-SDI signal
HD-SDI signal
3G-SDI signal
6G-SDI signal
*1
12G-SDI signal
*1
DIGITAL LINK signal input
f
Moving image signal resolution: 480/60p, 576/50p to 4 096 x 2 160
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
f
Dot clock frequency: 25 MHz to 297 MHz
DisplayPort signal input
*2
f
Moving image signal resolution: 720/60p to 4 096 x 2 160
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
Still image signal resolution: 640 x 480 to 3 840 x 2 400 (non-interlace)
f
Dot clock frequency: 25 MHz to 594 MHz
*1 This is supported when the optional Interface Board for 12G-SDI (Model No.: ET-MDN12G10) is installed in the slot.
*2 This is supported when the optional Interface Board for DisplayPort 2 input (Model No.: ET-MDNDP10) is installed in the slot.
12
PREFACE
< RCQ10 / RCQ80 >
2. 5. Dimensions
Unit: mm
498 (19-19/32")
442 (17-13/32")
457 (18")
221 (8-11/16")
20.5 (13/16")
115.5 (4-9/16")
200 (7-7/8")
249 (9-13/16")
43 (1-11/16")
538 (21-3/16")
* The above dimensions are obtained when the standard zoom lens is attached.
* Actual dimensions may differ depending on the product.
SECTION
1
INF-1
CONTENTS
1. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-2
1. 1. Remote controls
1. 2. Projector body
1. 3. Control panel
1. 4. Connecting terminals
1. 5. Interface Board (optional)
1. 2. Projector body
1. 3. Control panel
1. 4. Connecting terminals
1. 5. Interface Board (optional)
2. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-8
3. Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-12
3. 1. Setting to Service Mode
3. 2. Resetting to User Mode
3. 3. Functions of Service Mode
3. 2. Resetting to User Mode
3. 3. Functions of Service Mode
4. Notes on service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-25
4. 1. Before service operation
4. 2. Service
4. 3. Installing the Interface Board (optional)
4. 4. Security password
4. 2. Service
4. 3. Installing the Interface Board (optional)
4. 4. Security password
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-29
5. 1. Power/Light source/Temperature indicators
5. 2. Shutdown system
5. 3. Log data acquisition procedure
5. 4. Log data acquisition procedure using USB memory
5. 5. Self-diagnosis information acquisition by control commands
5. 6. System log error code table
5. 4. Troubleshooting
5. 2. Shutdown system
5. 3. Log data acquisition procedure
5. 4. Log data acquisition procedure using USB memory
5. 5. Self-diagnosis information acquisition by control commands
5. 6. System log error code table
5. 4. Troubleshooting
SECTION 1 SERVICE INFORMATION
Click on the first or last page to see other PT-RCQ10 / PT-RCQ80 (serv.man3) service manuals if exist.