PT-MZ16K, PT-MZ13K, PT-MZ10K (serv.man2) — Panasonic Projector Service Manual (repair manual). Page 5

View Panasonic PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) Service Manual online

5
PREFACE
<MZ16K/MZ13K/MZ10K>
CONTENTS
1. Safety Precautions
1.1. General Guidelines
1.2. Leakage Current Check
2. Specifications
SECTION 1 SERVICE INFORMATION
1. The name of each part
1.1. Remote controls
1.2. Projector body 
1.3. Control panel
1.4. Connecting terminals
2. Menu Navigation
2.1. On-screen
3. Service Mode
3.1. Setting to Service Mode
3.2. Resetting to User Mode
3.3. Functions of Service Mode
4. Notes on service
4.1. Before service operation
4.2. Service
4.3. Note on the parts replacement work
4.4. Replacement of consumable parts
4.5. Security password
5. Troubleshooting
5.1. LIGHT/TEMP/FILTER indicators
5.2. Information monitor
5.3. Shutdown system
5.4. System log data acquisition method
5.5. Self-diagnosis & error code table
5.6.  Self-diagnosis information acquisition by control 
commands
5.7. Troubleshooting
SECTION 2 DISASSEMBLY PROCEDURES
1. Parts Locations
1.1. Electrical parts location (P.C.Boards)
1.2. Electrical parts location (Fans)
1.3. Mechanical parts location
1.4. Optical parts location
2. Mechanical and Electrical Parts Disassembly
r
 Disassembly flow chart
2.1. Air filter unit, Air filter cover removal
2.2. Projection lens removal
2.3. Top cover removal
2.4. Terminal cover removal
2.5. A-PCB block removal
2.6. K-PCB block removal
2.7. Phosphor wheel block, RK-PCB removal
2.8. Front cover removal
2.9. Power block removal
2.10. Lighting case block removal
2.11. Filter case removal
2.12. Intake duct top, PBS fan removal
2.13. NF-PCB, Radiator fan block removal
2.14. LD exhaust fan removal
2.15. LD case block removal
2.16. PW fan removal
2.17. LCD fans removal
3. Optical Parts Disassembly
r
 Disassembly flow chart
3.1. Prism cover removal
3.2. Optical block removal
3.3. Polarizer (In) removal
3.4. Lighting case top removal
3.5. PBS, Integrator lens removal
3.6. Parts location and direction in the lighting case
<Cable wiring>
SECTION 3 ADJUSTMENTS
1. Adjustment Items and Procedures
1.1. Polarizer adjustment
1.2. Lens calibration
1.3. Electrical convergence adjustment 
1.4. Adjusted data transfer
1.5. Panel type setting
1.6. Flicker adjustment
1.7. Model setting
1.8.  Ghost feedback calibration 
1.9. Clog sensor calibration
1.10. LD unit runtime reset
1.11. Date and time setup
2. Firmware update procedure
Page of 116
Display

Click on the first or last page to see other PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) service manuals if exist.