DOWNLOAD Panasonic PT-F100NTU / PT-F100NTE / PT-F100NTEA / PT-F100U / PT-F100E / PT-F100EA Service Manual ↓ Size: 9.25 MB | Pages: 97 in PDF or view online for FREE

Model
PT-F100NTU PT-F100NTE PT-F100NTEA PT-F100U PT-F100E PT-F100EA
Pages
97
Size
9.25 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / LCD PROJECTOR
File
pt-f100ntu-pt-f100nte-pt-f100ntea-pt-f100u-pt-f100.pdf
Date

Panasonic PT-F100NTU / PT-F100NTE / PT-F100NTEA / PT-F100U / PT-F100E / PT-F100EA Service Manual ▷ View online

2 Ext Option
This projector has EXT OPTION in addition to standard on-screen menus.
     ·    
There are SELF CHECK and TEST PATTERN for service, etc.
2.1. Procedure to enter EXT OPTION
 1. Press "MENU" button on the main unit or remote control unit to display "MENU" screen, then select "OPTION" and press
"ENTER" button.
 2. Select "INPUT GUIDE" on "OPTION" menu and press "ENTER" button 3 seconds or longer.
MENU
OPTION
INPUT GUIDE
2.2. EXT OPTION Menu and Functions
     ·    
FREEZE MESSAGE
Switching ON/OFF "FREEZE" on-screen display
     ·    
FAN FULL MODE
Setting the cooling fan motor rotation speed
     − 
− 
− 
− 
Switching ON "FAN FULL MODE", the rotation level of the fan becomes high-speed rotation (fixed). Moreover, when "FAN
FULL MODE" is ON, changing "HIGHLAND" in OPTION becomes impossible (setting "FAN FULL MODE" is given priority
more than "HIGHLAND").
     ·    
AUTOSETUP
Setting AUTO SETUP mode
     − 
− 
− 
− 
STANDARD: To set the normal mode (the dot clock is adjusted strictly))
     − 
− 
− 
− 
SPECIAL: To set the special mode (the dot clock is adjusted roughly)
Note:
     − 
− 
− 
− 
Do not change the initial setting (STANDARD).
     ·    
SYNC
Setting SYNC processing mode
     − 
− 
− 
− 
STANDARD: To set the normal mode
     − 
− 
− 
− 
SPECIAL: To set the special mode (noise reduction mode)
Note:
     − 
− 
− 
− 
Do not change the setting when it is possible to receive normally.
Change the setting only when the image is not displayed normally because of the sync signal noise of connected
equipment.
     ·    
VGA60/480p
     − 
− 
− 
− 
AUTO: Switching RGB of VGA60 and 480p automatically
     − 
− 
− 
− 
VGA60: Inputting signals in 59.9Hz / VGA480
     − 
− 
− 
− 
480p: Inputting signals in RGB of 480p
     ·    
HPLL
6
PT-F100NTU / PT-F100NTE / PT-F100NTEA / PT-F100U / PT-F100E / PT-F100EA
When non-standard signal of VIDEO/S-VIDEO is inputted (VTR, VHD, etc.), horizontal synchronization might be disordered
according to connected equipment. In this case, set HPLL to OFF.
     ·    
EMULATE
Switching the operation of RS-232C command to communicate with models other than F100 series.
     − 
− 
− 
− 
DEFAULT: F100/F100NT standard, D3500
     − 
− 
− 
− 
TYPE1: L730/L780/L735/LB/LC series
     − 
− 
− 
− 
TYPE2: L785
     − 
− 
− 
− 
OTHER: Models other than the above-mentioned (Consult your dealer or Authorized Service Center for details.)
     ·    
ARF ROLL
Rolling the ARF (Auto Rolling Filter) compulsorily.
     ·    
SELF CHECK
To enter the self-check mode
     ·    
TEST PATTERN
To display test patterns
     ·    
FLICKER ADJUST
To enter the flicker adjustment mode
2.3. Canceling EXT OPTION
Press "MENU" button on the main unit or remote control unit.
3 Self-Check Mode
This mode is used to narrow down the location of the failure.
3.1. Procedure to enter the self-check mode
Select "SELF CHECK" on "EXT OPTION" menu and press "ENTER" button on the main unit or remote control unit.
7
PT-F100NTU / PT-F100NTE / PT-F100NTEA / PT-F100U / PT-F100E / PT-F100EA
3.2. Self Check Display and Contents
8
PT-F100NTU / PT-F100NTE / PT-F100NTEA / PT-F100U / PT-F100E / PT-F100EA
3.3. Canceling the self-check mode
Press "MENU" button on the main unit or remote control unit.
4 Test Pattern
This projector displays seven kinds of test patterns [Horizontal lines, Vertical lines, Dots, Crosshatch, White cross, Black cross and
White (No pattern)] in the four colors (White, Red, Green and Blue).
Note:
     ·    
Because the above patterns can be displayed by each color without test equipment such as PC or SG, use it for simplified
adjustments by your eyes and so on.
4.1. Procedure to display test patterns
Select "TEST PATTERN" on "EXT OPTION" menu and press "ENTER" button on the main unit or remote control unit.
Note:
     ·    
On the test pattern screen, pressing the up-arrow "
" or down-arrow "
" button allows the test pattern selection and
the left-arrow "
" or right-arrow "
" button the color selection (White / Red / Green / Blue).
4.2. Canceling the test pattern display
Press "MENU" button on the main unit or remote control unit.
5 Flicker Adjustment Mode
If replacing the optical parts (LCD Panel / LCD block) of this projector and/or A-P.C.Board (assembly), enter the flicker adjustment
mode and minimize the flicker.
5.1. Procedure to enter the adjustment mode
Select "FLICKER ADJUST" on "EXT OPTION" menu and press "ENTER" button on the main unit or remote control unit.
Note:
"DESK setting (blue)" is displayed when entering the adjustment mode.
5.2. Adjustment Display and Contents
     ·    
Setting value is increased and decreased with the right-arrow "
" and left-arrow "
" buttons.
"
": Decrease, "
": Increase
     − 
− 
− 
− 
Adjust the setting value to minimize the flicker on the screen.
     − 
− 
− 
− 
Execute the adjustment by 6 patterns below.
     ·    
The pattern (adjustment display) is switched with the up-arrow "
" and down-arrow "
" buttons.
"
": Forward direction, "
": Reverse direction
     − 
− 
− 
− 
There are 6 patterns of "DESK setting (blue)", "DESK setting (red)", "DESK setting (green)", "CEILING setting (blue)",
"CEILING setting (red)" and "CEILING setting (green)".
     − 
− 
− 
− 
The setting value is saved into this projector when the pattern is switched.
5.3. Canceling the flicker adjustment mode
Press "MENU" button on the main unit or remote control unit.
Note:
When "MENU" button is pressed, the setting value at that time is saved into this projector and the adjustment mode is canceled.
9
PT-F100NTU / PT-F100NTE / PT-F100NTEA / PT-F100U / PT-F100E / PT-F100EA
Page of 97
Display

Click on the first or last page to see other PT-F100NTU / PT-F100NTE / PT-F100NTEA / PT-F100U / PT-F100E / PT-F100EA service manuals if exist.