Panasonic PT-EZ580 / PT-EZ580L / PT-EZ580D / PT-EZ580LD / PT-EW640 / PT-EW640L / PT-EW640D / PT-EW640LD / PT-EX610 / PT-EX610L / PT-EX610D / PT-EX610LD Service Manual ▷ View online
5
PREFACE
2. Specifications
Power supply
AC 100 V - 240 V, 50 Hz/60 Hz
Power consumption
PT-EZ580
510 W (5.9 A - 2.3 A) or less
PT-EW640, PT-EX610
495 W (5.7 A - 2.2 A) or less
PT-EZ580, PT-EW640, PT-EX610
0.3 W when [STANDBY MODE] is set to [ECO]
10 W when [STANDBY MODE] is set to [NORMAL]
37 W when [IN STANDBY MODE] in [AUDIO SETTING] is set to [ON]
10 W when [STANDBY MODE] is set to [NORMAL]
37 W when [IN STANDBY MODE] in [AUDIO SETTING] is set to [ON]
LCD panel
Size
PT-EZ580
1.9 cm (0.76") (aspect ratio 16:10)
PT-EW640
1.9 cm (0.76") (aspect ratio 16:10)
PT-EX610
2.0 cm (0.79") (aspect ratio 4:3)
Display system
Translucent screen LCD panel 3 panels, 3 primary color system
Drive system
Active matrix
Number of pixels
PT-EZ580
2 304 000 pixels (1 920 x 1 200 dots) x 3 panels
PT-EW640
1 024 000 pixels (1 280 x 800 dots) x 3 panels
PT-EX610
786
432 pixels (1 024 x 786 dots) x 3 panels
Lens
*1
Electric zoom
1.7 - 2.8:1
Electric focus
F = 1.7 - 2.3
f = 26.9 mm - 45.4 mm
f = 26.9 mm - 45.4 mm
Luminous lamp
335 W, UHM lamp
Light output
*2*3
PT-EZ580
5 400 lm
PT-EW640
5 800 lm
PT-EX610
6 200 lm
Contrast ratio
*3
PT-EZ580, PT-EW640
PT-EX610
PT-EX610
5 000:1 (when [IRIS] is set to [ON], [LAMP POWER] is set to [AUTO] and
[PICTURE MODE] is set to [DYNAMIC])
[PICTURE MODE] is set to [DYNAMIC])
Color system
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Projected image size
1.02 m (40") - 10.16 m (400")
Screen aspect ratio
PT-EZ580
16:10
PT-EW640
PT-EX610
4:3
Projection method
[FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR]
Speaker
3.7 cm, round, x 1
Max. effective audio output
10 W (monaural)
Power cord length
3.0 m (118-1/8")
Outer case
Molded plastic
Dimensions
Width
530 mm (20-7/8")
Height
177 mm (6-31/32") (with legs at shortest position)
Depth
PT-EZ580
PT-EW640
PT-EX610
PT-EW640
PT-EX610
445 mm (17-17/32") (including standard zoom lens)
PT-EZ580L
PT-EW640L
PT-EX610L
PT-EW640L
PT-EX610L
385 mm (15-5/32") (excluding optional lens)
Weight
Approx. 10.6 k] (23.4 lbs.)
*4
(including standard zoom lens)
Approx. 9.8 k] (21.6 lbs.)
*4
(excluding optional lens)
Noise level
*3
35 dB when [LAMP POWER] is set to [NORMAL]
29 dB when [LAMP POWER] is set to [ECO]
29 dB when [LAMP POWER] is set to [ECO]
*1 For PT-EZ580L, PT-EW640L, PT-EX610L, the lens is sold separately.
*2 Value is for the supplied standard zoom lens. The value varies depending on the lens.
*3 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*4 Average value. Weight varies for each product.
*2 Value is for the supplied standard zoom lens. The value varies depending on the lens.
*3 Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*4 Average value. Weight varies for each product.
6
PREFACE
Chapter 6
Appendix —
150 - ENGLISH
Operating
environment
environment
Operating
environment
temperature
environment
temperature
*1
0 °C (32 °F) - 45 °C (113 °F)
Operating
environment
humidity
environment
humidity
10 % - 80 % (No condensation)
Remote
control
control
Power supply
DC 3 V (AAA/R03/LR03 battery x 2)
Operating range
Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
102 ] (3.6 ozs.) (including batteries)
Dimensions
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1 When using the projector at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level), the operating environment
temperature should be between 0 °C (32 °F) and 40 °C (104 °F).
If the [PROJECTOR SETUP] menu
If the [PROJECTOR SETUP] menu
→ [ECO MANAGEMENT] → [LAMP POWER] is set to [AUTO] or [NORMAL], [LAMP POWER] may be set to
[ECO] forcibly to protect the projector when the operating environment temperature becomes 40 °C (104 °F) or higher (35 °C (95 °F) or higher when
using the projector at high altitudes).
using the projector at high altitudes).
r Applicable scanning frequency
Refer to “List of compatible signals” (x page 146) for the types of video signals that can be used with the projector.
For video signal
Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz
For Y/C signal
Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz
For RGB signal
Horizontal: 15 kHz - 100 kHz, Vertical: 24 Hz - 120 Hz
PIAS (Panasonic Intelligent Auto Scanning) system
PIAS (Panasonic Intelligent Auto Scanning) system
f Dot clock frequency: 162 MHz or less
For YC
B
C
R
/YP
B
P
R
signal
f 525i (480i)
Horizontal: 15.75 kHz, Vertical: 60 Hz
f 525p (480p)
Horizontal: 31.5 kHz, Vertical: 60 Hz
f 750 (720)/60p
Horizontal: 45 kHz, Vertical: 60 Hz
f 1125 (1080)/50i
Horizontal: 28.13 kHz, Vertical: 50 Hz
f 1125 (1080)/24sF
Horizontal: 27 kHz, Vertical: 48 Hz
f 1125 (1080)/30p
Horizontal: 33.75 kHz, Vertical: 30 Hz
f 1125 (1080)/50p
Horizontal: 56.25 kHz, Vertical: 50 Hz
f 625i (576i)
Horizontal: 15.63 kHz, Vertical: 50 Hz
f 625p (576p)
Horizontal: 31.25 kHz, Vertical: 50 Hz
f 750 (720)/50p
Horizontal: 37.5 kHz, Vertical: 50 Hz
f 1125 (1080)/60i
Horizontal: 33.75 kHz, Vertical: 60 Hz
f 1125 (1080)/24p
Horizontal: 27 kHz, Vertical: 24 Hz
f 1125 (1080)/25p
Horizontal: 28.13 kHz, Vertical: 25 Hz
f 1125 (1080)/60p
Horizontal: 67.5 kHz, Vertical: 60 Hz
f The SYNC/HD and VD terminals do not support 3 value SYNC.
For DVI-D signal
525i (480i)
*1
, 625i (576i)
*1
, 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p
f Displayable resolution: VGA - WUXGA (non-interlaced)
f Dot clock frequency: 25 MHz - 162 MHz
For HDMI signal
525i (480i)
*1
, 625i (576i)
*1
, 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p
f Displayable resolution: VGA - WUXGA (non-interlaced)
f Dot clock frequency: 25 MHz - 162 MHz
For DisplayPort signal
525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,
1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p
1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,
1125 (1080)/60p, 1125 (1080)/50p
f Displayable resolution: VGA - WUXGA (non-interlaced)
f Dot clock frequency: 25 MHz - 162 MHz
*1 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
Note
f DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.
7
PREFACE
Chapter 6
Appendix —
ENGLISH - 151
r Terminal
<RGB 1 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75
Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL
high impedance, automatic positive/negative
polarity compatible
VD
TTL
high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<RGB 2 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC/VIDEO x 1))
RGB signal
0.7 V [p-p] 75
Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL
high impedance, automatic positive/negative
polarity compatible
VD
TTL
high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
Video signal
Y: 1.0 V [p-p] 75 Ω
<MONITOR OUT> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75
Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL
high impedance, positive/negative polarity
VD
TTL
high impedance, positive/negative polarity
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-
D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 pin, HDCP compatible, Deep Color compatible
Audio signal
Audio signal
Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<VIDEO IN> terminal
1 set, pin jack 1.0 V [p-p] 75
Ω
<DisplayPort IN> terminal
*1
1 set, DisplayPort 20 pin, HDCP compatible
Audio signal
Audio signal
Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<AUDIO IN 1>/<AUDIO IN 2>
terminals
terminals
1 set each, M3 stereo mini jack 0.5 V [rms], input impedance 22 kΩ or more
<AUDIO IN 3> terminal
1 set, pin jack x 2 (L-R) 0.5 V [rms], input impedance 22 kΩ or more
<VARIABLE AUDIO OUT>
terminal
terminal
1 set, M3 stereo mini jack (monitor output, stereo compatible)
0
0
V [rms] to 2.0 V [rms] (variable), output impedance 2.2 kΩ or less
<SERIAL IN> terminal
D-Sub 9
p, 1 set, RS-232C compliant, for computer control
<REMOTE 1 IN> terminal
M3 stereo mini jack cable, 1 set, for remote control (wired)
<REMOTE 2 IN> terminal
1 set, D-Sub 9
p, for external control
<DIGITAL LINK/LAN> terminal
1 set, RJ-45, for network, DIGITAL LINK connection, PJLink compatible, 100Base-TX
Note
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
8
PREFACE
Click on the first or last page to see other PT-EZ580 / PT-EZ580L / PT-EZ580D / PT-EZ580LD / PT-EW640 / PT-EW640L / PT-EW640D / PT-EW640LD / PT-EX610 / PT-EX610L / PT-EX610D / PT-EX610LD service manuals if exist.