DOWNLOAD Panasonic PT-EZ580 / PT-EZ580L / PT-EZ580D / PT-EZ580LD / PT-EW640 / PT-EW640L / PT-EW640D / PT-EW640LD / PT-EX610 / PT-EX610L / PT-EX610D / PT-EX610LD (serv.man2) Service Manual ↓ Size: 28.65 MB | Pages: 127 in PDF or view online for FREE

Model
PT-EZ580 PT-EZ580L PT-EZ580D PT-EZ580LD PT-EW640 PT-EW640L PT-EW640D PT-EW640LD PT-EX610 PT-EX610L PT-EX610D PT-EX610LD (serv.man2)
Pages
127
Size
28.65 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / LCD PROJECTOR
File
pt-ez580-pt-ez580l-pt-ez580d-pt-ez580ld-pt-ew640-p.pdf
Date

Panasonic PT-EZ580 / PT-EZ580L / PT-EZ580D / PT-EZ580LD / PT-EW640 / PT-EW640L / PT-EW640D / PT-EW640LD / PT-EX610 / PT-EX610L / PT-EX610D / PT-EX610LD (serv.man2) Service Manual ▷ View online

6
PREFACE
Chapter 6 Appendix — 
150 - ENGLISH
Operating 
environment
Operating 
environment 
temperature
*1
0 °C (32 °F) - 45 °C (113 °F)
Operating 
environment 
humidity
10 % - 80 % (No condensation)
Remote 
control
Power supply
DC 3 V (AAA/R03/LR03 battery x 2)
Operating range Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
102 ] (3.6 ozs.) (including batteries)
Dimensions
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
*1  When using the projector at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level), the operating environment 
temperature should be between 0 °C (32 °F) and 40 °C (104 °F).
If the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [LAMP POWER] is set to [AUTO] or [NORMAL], [LAMP POWER] may be set to 
[ECO] forcibly to protect the projector when the operating environment temperature becomes 40 °C (104 °F) or higher (35 °C (95 °F) or higher when 
using the projector at high altitudes).
 
r
Applicable scanning frequency
Refer to “List of compatible signals” (x page 146) for the types of video signals that can be used with the projector.
For video signal
Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz
For Y/C signal
Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz
For RGB signal
Horizontal: 15 kHz - 100 kHz, Vertical: 24 Hz - 120 Hz
PIAS (Panasonic Intelligent Auto Scanning) system
 
f
Dot clock frequency: 162 MHz or less
For YC
B
C
R
/YP
B
P
R
 signal
 
f
525i (480i)
Horizontal: 15.75 kHz, Vertical: 60 Hz
 
f
525p (480p)
Horizontal: 31.5 kHz, Vertical: 60 Hz
 
f
750 (720)/60p
Horizontal: 45 kHz, Vertical: 60 Hz
 
f
1125 (1080)/50i
Horizontal: 28.13 kHz, Vertical: 50 Hz
 
f
1125 (1080)/24sF
Horizontal: 27 kHz, Vertical: 48 Hz
 
f
1125 (1080)/30p
Horizontal: 33.75 kHz, Vertical: 30 Hz
 
f
1125 (1080)/50p
Horizontal: 56.25 kHz, Vertical: 50 Hz
 
f
625i (576i)
Horizontal: 15.63 kHz, Vertical: 50 Hz
 
f
625p (576p)
Horizontal: 31.25 kHz, Vertical: 50 Hz
 
f
750 (720)/50p
Horizontal: 37.5 kHz, Vertical: 50 Hz
 
f
1125 (1080)/60i
Horizontal: 33.75 kHz, Vertical: 60 Hz
 
f
1125 (1080)/24p
Horizontal: 27 kHz, Vertical: 24 Hz
 
f
1125 (1080)/25p
Horizontal: 28.13 kHz, Vertical: 25 Hz
 
f
1125 (1080)/60p
Horizontal: 67.5 kHz, Vertical: 60 Hz
 
f
The SYNC/HD and VD terminals do not support 3 value SYNC.
For DVI-D signal
525i (480i)
*1
, 625i (576i)
*1
, 525p (480p), 625p (576p), 750 (720)/60p,  
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,  
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,  
1125 (1080)/60p, 1125 (1080)/50p
 
f
Displayable resolution: VGA - WUXGA (non-interlaced)
 
f
Dot clock frequency: 25 MHz - 162 MHz
For HDMI signal
525i (480i)
*1
, 625i (576i)
*1
, 525p (480p), 625p (576p), 750 (720)/60p,  
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,  
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,  
1125 (1080)/60p, 1125 (1080)/50p
 
f
Displayable resolution: VGA - WUXGA (non-interlaced)
 
f
Dot clock frequency: 25 MHz - 162 MHz
For DisplayPort signal 
525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,  
1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24p,  
1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p,  
1125 (1080)/60p, 1125 (1080)/50p
 
f
Displayable resolution: VGA - WUXGA (non-interlaced)
 
f
Dot clock frequency: 25 MHz - 162 MHz
*1  Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
 
Note
 
f
DIGITAL LINK input compatible signal is the same as HDMI input compatible signal. 
7
PREFACE
Chapter 6 Appendix — 
ENGLISH - 151
 
r
Terminal
<RGB 1 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<RGB 2 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC/VIDEO x 1))
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
Video signal
Y: 1.0 V [p-p] 75 Ω
<MONITOR OUT> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, positive/negative polarity
VD
TTL high impedance, positive/negative polarity
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 pin, HDCP compatible, Deep Color compatible
Audio signal
Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<VIDEO IN> terminal
1 set, pin jack 1.0 V [p-p] 75 Ω
<DisplayPort IN> terminal 
*1
1 set, DisplayPort 20 pin, HDCP compatible
Audio signal
Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<AUDIO IN 1>/<AUDIO IN 2> 
terminals
1 set each, M3 stereo mini jack 0.5 V [rms], input impedance 22 kΩ or more
<AUDIO IN 3> terminal
1 set, pin jack x 2 (L-R) 0.5 V [rms], input impedance 22 kΩ or more
<VARIABLE AUDIO OUT> 
terminal
1 set, M3 stereo mini jack (monitor output, stereo compatible)
0 V [rms] to 2.0 V [rms] (variable), output impedance 2.2 kΩ or less
<SERIAL IN> terminal
D-Sub 9 p, 1 set, RS-232C compliant, for computer control
<REMOTE 1 IN> terminal
M3 stereo mini jack cable, 1 set, for remote control (wired)
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for external control
<DIGITAL LINK/LAN> terminal  1 set, RJ-45, for network, DIGITAL LINK connection, PJLink compatible, 100Base-TX
 
 
Note
 
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
8
PREFACE
INF-1
CONTENTS
Service Information
 
Model No.  PT-EZ580 series
 
 
PT-EW640 series
 
 
PT-EX610 series
SECTION 1 SERVICE INFORMATION
(2014-04)
SECTION 1 SERVICE INFORMATION
1. The name of each part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-2
1.1 Projector body
1.2 Control panel
1.3 Connecting terminals
1.4 Remote controls
2. Menu Navigation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-6
3. Service Mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-11
3. 1. Setting to Service Mode
3. 2. Resetting to User Mode
3. 3. Functions of Service Mode
4. External Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-16
4. 1. Control through Serial terminal
4. 2. Control through LAN terminal
4. 3. Control commands List
5. Notes on service  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-21
5. 1. Before service operation
5. 2. Service
5. 3. Replacement of consumable parts
5. 4. Initialization for control device password
6. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INF-27
6. 1. Shutdown system
6. 2. System log data acquisition method
6. 3. Troubleshooting
Page of 127
Display

Click on the first or last page to see other PT-EZ580 / PT-EZ580L / PT-EZ580D / PT-EZ580LD / PT-EW640 / PT-EW640L / PT-EW640D / PT-EW640LD / PT-EX610 / PT-EX610L / PT-EX610D / PT-EX610LD (serv.man2) service manuals if exist.