DOWNLOAD Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man4) Service Manual ↓ Size: 5.17 MB | Pages: 24 in PDF or view online for FREE

SECTION 2  DISASSEMBLY  PROCEDURES

<PT-DZ16K>

・ Before Disassembly the projector, turn off the POWER switch and disconnect the power plug from the wall outlet.
・ Please wear protective gloves, not to be hurt with a metal part or a shield board.
・ To assemble, reverse the disassembly procedures.
・ When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
・ The illustration of the explanation is sample model. By a model, there is slightly a different case.

<R3/M1/R/RM/RL/TL/SL/BR/M2 -P.C.Board>

<WF/G/WL/RW/A -P.C.Board>

<PC1/PC2 -P.C.Board>

 Removal of Power supply
 block

2. 5.

 Completed Product

2. 2.

 Removal of Upper case

 Removal of Signal
 processing block

2. 4.

 Removal of Ballast block

2. 3.

DIS-4

<B-P.C.Board>

<Mechanical shutter>

2. 9.

 Removal of Analysis mirror /
 Lens Mount (Assy)

 Removal of DMD block /
 Liquid cooling unit

2. 8.

 Removal of Iris unit (Assy)

2. 6.

2. 7.

 Removal of Rod (Assy)

DIS-4

SECTION 2  DISASSEMBLY  PROCEDURES

<PT-DZ16K>

1. While grasp the right and left buttons, pull the lens cover to remove.

2. Loosen the each 1 screw until it idles, then remove the Rear cover and Filter cover.

Rear cover

Filter cover

projection lens cover

R3-P.C.Board

M1-P.C.Board

< Rear cover >

* Unscrew the 2 screws and remove the R3-P.C.Board

(XTB3+12GFJK)

* Unscrew the 1 screw and remove the M1-P.C.Board.

(XTW3+8PFJ)

DIS-5

3. Unscrew the 10 screws and remove the Upper Case.

* Unscrew the 2 screws(XYN3+F8FJ) and remove the R-P.C.Board.

* Unscrew the 2 screws(XYN3+F8FJ) and remove the RM-P.C.Board.

* Unscrew the 2 screws(XYN3+F8FJ) and remove the RL-P.C.Board.

* Unscrew the 2 screws(XTW3+8PFJ) and remove the TL-P.C.Board.

* Unscrew the 1 screw(XTW3+8PFJ) and remove the SL-P.C.Board.

* Unscrew the 2 screws(XTW3+8PFJ) and remove the BR-P.C.Board.

* Unscrew the 1 screws(XTW3+8PFJ) and remove the M2-P.C.Board.

Rear cover

XYN3+F8FJ

XTW3+8PFJ

BR-P.C.Board

TL-P.C.Board

SL-P.C.Board

R-P.C.Board

RM-P.C.Board

RL-P.C.Board

M2-P.C.Board

XSB4+10FJK

XSB4+10FJK

Upper Case

XSB4+10FJK

Upper Case

 Unscrew the 1 screw and remove the M1-P.C.Board.

(XTW3+8PFJ)

DIS-5

SECTION 2  DISASSEMBLY  PROCEDURES

<PT-DZ16K>

1. Remove the Upper Case according to the section 2.2. "Removal of Upper Case".

2. Unscrew the 2 screws and remove the Signal processing cover.

3. Unscrew the 6 screws and remove the Signal processing block.

* Flexible cable connector, hold the protrusion on both ends, please unplug straight.

A locking mechanism may be broken when removed a connector diagonally.
Also, when assembling the block, straight, please insert the connector reliably.

XYN3+F8FJ

Signal processing cover

DIS-6

  

* Unscrew the 4 screws and remove the Signal processing block.

< Signal processing block >

S-P.C.Board

XTW3+8PFJ

XTB4+12G

Signal processing block

XYN3+F8F

DIS-6

SECTION 2  DISASSEMBLY  PROCEDURES

<PT-DZ16K>

4. Unscrew the 4 screws and remove the Terminal cover.

5. Unscrew the 4 screws and remove the WF-P.C.Board.

*WF-P.C.Board is connected to the RW-P.C.Board with direct connector. So carefully when removing it.

6. Unscrew the 11 screws and remove the G-P.C.Board.

* G-P.C.Board is connected to the A-P.C.Board with direct connector. So carefully when removing it.

XSB3+6FJK

Terminal cover

XYN3+F8FJ

WF-P.C.Board

B to B Connector

DIS-7

y

g

7. 1)Unscrew the 3 screws and remove the WL-P.C.Board. 

    2)Unscrew the 1 screw and remove the RW-P.C.Board. 

* RW-P.C.Board is connected to the A-P.C.Board with direct connector. So carefully when removing it.

THEC084N

Terminal Plate

XYN3+F8FJ

B to B Connector

ＷＬ-P.C.Board

XYN3+F8FJ

ＲＷ-P.C.Board

Ｇ-P.C.Board

B to B Connector

XYN3+F8FJ

DIS-7