Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man4) Service Manual / Other ▷ View online
SECTION 2 DISASSEMBLY PROCEDURES
<PT-DZ16K>
1. Parts Location
1. 1. Electrical Parts Location (P.C.Board)
Image processing system / Microcomputer
Relay Board (A-WF)
Control terminal / Fan,Iris,Motor Drive
Front IR receiver / Status LED
Geometric Adjustment
Rear IR receiver
Net ork (LAN)
Rela Board (Lamp case)
RW
R
BR
LR/LL
A
G
WF
WL
Board Name
Function summary
Board Name
Function summary
TL
M3
M2
M1(Int)
H
MR
K
LL
R
PC1
FG(B)
FR(R)
FG(G)
M1(Ext)
RL
BR
R3
B(Lamp1)
B(Lamp2)
S
G
WF
WL
A
RM
PC2
SL
LR
EL
ER
B(Lamp3)
B(Lamp4)
RW
DIS-2
Network (LAN)
Relay Board (Lamp case)
Control Panel
Lamp memory connection
DMD drive
Temp sensor (Intake/Exhaust)
Ballast power/control
Temp sensor (Air flow)
Power supply (DC-DC)
Luminance Sensor
AC power distribution, Fuse
Iris posistion sensor / Iris relay board
Relay Board (Lens nounter motor)
Operation panel lighting
Relay Board (Fan)
Terminal panel lighting
Rear cover connection / Interlock
1. 2. Electrical Parts Location (Fan)
RL
SL
TL
R3
LR/LL
ER/EL
M1
M2
M3
K
H/MR
PC
RM
FG/FR
B
WL
S
Ballast 2 Fan
Inrake 2 Fan
Lamp-L Fan
Exhaust 1 Fan
Exhaust 3 Fan
Exhaust 2 Fan
Power Fan
Lamp 4 Fan
Exhaust 4 Fan
Lamp 1 Fan
Lamp 2 Fan
Intake 1 Fan
Lamp-R Fan
Color prism 1 Fan
Color prism 2 Fan
Color prism 3 Fan
Ballast 1 Fan
Lamp 3 Fan
Signal block Fan
Intake 1 Fan
DIS-2
SECTION 2 DISASSEMBLY PROCEDURES
<PT-DZ16K>
1. 3. Mechanism element parts location
Analysis Block
Lamp fan block
DMD block
Power Supply
Block Cover
Block Cover
Signal Processing Block
Intake duct block
Lamp case R
Rear Cover
Ballast block
Upper Case
Lamp case L
Air filter
DIS-3
1. 4. Optical parts location
DMD block
Lens Mount
Bottom Case
Air filter
Color prism 2 Fan
Liquid cooling unit
Rod
Relay lens
Iris
Mechanical shutter
Lens mount
DMD block
Analysis mirror block
Color prism 3 Fan
Color prism 1 Fan
DIS-3
SECTION 2 DISASSEMBLY PROCEDURES
<PT-DZ16K>
2. Disassembly Instructions
2. 1. Flowchart for Disassembly
[Note]
・ Before Disassembly the projector, turn off the POWER switch and disconnect the power plug from the wall outlet.
・ Please wear protective gloves, not to be hurt with a metal part or a shield board.
・ To assemble, reverse the disassembly procedures.
・ When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
・ The illustration of the explanation is sample model. By a model, there is slightly a different case.
・ Please wear protective gloves, not to be hurt with a metal part or a shield board.
・ To assemble, reverse the disassembly procedures.
・ When tore off sticky tapes, please use a new thing without reusing it on the occasion of assembling.
・ The illustration of the explanation is sample model. By a model, there is slightly a different case.
<R3/M1/R/RM/RL/TL/SL/BR/M2 -P.C.Board>
<WF/G/WL/RW/A -P.C.Board>
<PC1/PC2 -P.C.Board>
Removal of Power supply
block
block
2. 5.
Completed Product
2. 2.
Removal of Upper case
Removal of Signal
processing block
processing block
2. 4.
Removal of Ballast block
2. 3.
DIS-4
<B-P.C.Board>
<Mechanical shutter>
2. 9.
Removal of Analysis mirror /
Lens Mount (Assy)
Lens Mount (Assy)
Removal of DMD block /
Liquid cooling unit
Liquid cooling unit
2. 8.
Removal of Iris unit (Assy)
2. 6.
2. 7.
Removal of Rod (Assy)
DIS-4
SECTION 2 DISASSEMBLY PROCEDURES
<PT-DZ16K>
2. 2. Removal of Upper case <R3/M1/R/RM/RL/TL/SL/BR/M2 -P.C.Board>
1. While grasp the right and left buttons, pull the lens cover to remove.
2. Loosen the each 1 screw until it idles, then remove the Rear cover and Filter cover.
Rear cover
Filter cover
projection lens cover
R3-P.C.Board
M1-P.C.Board
< Rear cover >
* Unscrew the 2 screws and remove the R3-P.C.Board
(XTB3+12GFJK)
* Unscrew the 1 screw and remove the M1-P.C.Board.
(XTW3+8PFJ)
DIS-5
3. Unscrew the 10 screws and remove the Upper Case.
* Unscrew the 2 screws(XYN3+F8FJ) and remove the R-P.C.Board.
* Unscrew the 2 screws(XYN3+F8FJ) and remove the RM-P.C.Board.
* Unscrew the 2 screws(XYN3+F8FJ) and remove the RL-P.C.Board.
* Unscrew the 2 screws(XTW3+8PFJ) and remove the TL-P.C.Board.
* Unscrew the 1 screw(XTW3+8PFJ) and remove the SL-P.C.Board.
* Unscrew the 2 screws(XTW3+8PFJ) and remove the BR-P.C.Board.
* Unscrew the 1 screws(XTW3+8PFJ) and remove the M2-P.C.Board.
Rear cover
XYN3+F8FJ
XTW3+8PFJ
BR-P.C.Board
TL-P.C.Board
SL-P.C.Board
R-P.C.Board
RM-P.C.Board
RL-P.C.Board
M2-P.C.Board
XSB4+10FJK
XSB4+10FJK
Upper Case
XSB4+10FJK
Upper Case
Unscrew the 1 screw and remove the M1-P.C.Board.
(XTW3+8PFJ)
DIS-5
