PT-DZ16KU, PT-DZ16KE, PT-DS16KD (serv.man14) — Panasonic Projector Other Service Manuals (repair manual). Page 38

View Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man14) Other Service Manuals online

SECTION 1  SERVICE  INFORMATION
<PT-DZ16K>
G  Replace the G-P.C.Board.
 ■ Controls of side panel does not respond
G
 
Check cable between connectors G2 and S1
 (No breaking of wire, etc.).
 Replace the cable.
G  When MAIN POWER is turned ON, the voltage of
 connector G2 pin 10 is 3.3V.
 ■ REMOTE 2 IN does not respond
 Cable is connected with JK6005(REMOTE IN2).
G
 When POWER is turned ON and OFF by remote
control,
 the signal can be detected with IC6011 pins 14 and
18.
G  Check and repair IC6011 and the peripheral circuits.
  Connect the cables properly.
G  Replace the G-P.C.Board.
OK
NG
NG
OK
OK
NG
NG
OK
INF - 38
G
S
G  Replace the G-P.C.Board.
 The voltage of connector G2 pins 6-8 is approx 3V.
 Replace the S-P.C.Board.
OK
NG
OK
INF - 38
Page of 38
Display

Download Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man14) Other Service Manuals