DOWNLOAD Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man11) Service Manual ↓ Size: 524.13 KB | Pages: 14 in PDF or view online for FREE

Model
PT-DZ16KU PT-DZ16KE PT-DS16KD (serv.man11)
Pages
14
Size
524.13 KB
Type
PDF
Document
Service Manual / Other
Brand
Device
Projector / 3-CHIP DLP BASED PROJECTOR
File
pt-dz16ku-pt-dz16ke-pt-ds16kd-sm11.pdf
Date

Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man11) Service Manual / Other ▷ View online

SECTION 3  ADJUSTMENTS
<PT-DZ16K>
4. A result of the connection confirmation is displayed.
5. Select Microprocessor to update, and click [load] button.
6. Appoint the microcomputer software that took in a computer beforehand, and click [Open] button.
"Check: OK" ⇒ Click a [OK] button and advance next.
"Check: NG" ⇒ Come back to item 3., and please
                      confirm whether setting is right.
ADJ - 10
7. When load of the microcomputer software is completed, a checkmark and path and a version are displayed.
* When do not do update in Microprocessor Software which did load, exclude a checkmark of Microprocessor
  to fall under.
   Without a mistake, click a [Update] button.
ADJ - 10
SECTION 3  ADJUSTMENTS
<PT-DZ16K>
8. Click [OK] button and start update.
9. If completion and a message are displayed, click [OK] button.
While update it, Lamp1-4 indicator indicates as follows
*Main ⇒ Lamp indicator 1-4, flashing red in order.
*Sub ⇒ Lamp indicator 1-4  all lit red.
*Network ⇒ Lamp indicator 1-4, flashing red in orde
*Formatter ⇒ Power indicator lit green.
Lamp indicator 1-4  all lit red.
*Rewrite the same version of
software will be skipped.
ADJ - 11
10. Click [EXIT]button, and please be finished.
* Reboot Projector, and please confirm whether the version of the Microprocessor Software is updated definitely,
   with sub menu " STATUS" of the main menu " PROJECTOR SETUP" .
software will be skipped.
ADJ - 11
SECTION 3  ADJUSTMENTS
<PT-DZ16K>
  2. 2. Update by the SERIAL terminal connection
    2. 2. 1. Equipment to be used
1. Computer : Use it for the transfer of software.
2. Communication cable : D-sub 9pin (male/female RS-232C straight)
3. Service Software : [MainSubNet Update Tool.exe] Service software is downloaded from the projector service homepage.
4. Microprocessor Software: Please download the file from the projector service homepage to the PC.
    2. 2. 2. Connection Preparations
[Note]
Set up your computer not to standby or shutdown.
    2. 2. 3. Update procedure
1. Switch the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Start up service software with a computer, select Model, and then click the [OK] button.
1. Confirm the projector's ID, baudrate, prity and
     take a memo.
2. Connect the "SERIAL IN" termanal of projector
    and PC with a RS-232C cable.
ADJ - 12
3. Select "Serial" in "Connection", and input the ID, Port, Baudrate, Parity , and click [Connection Check] button.
4. A result of the connection confirmation is displayed.
"Check: NG" ⇒ Come back to item 3., and please
                      confirm whether setting is right.
"Check: OK" ⇒ Click a [OK] button and advance next.
ADJ - 12
SECTION 3  ADJUSTMENTS
<PT-DZ16K>
5. Select Microprocessor to update, and click [load] button.
6. Appoint the microcomputer software that took in a computer beforehand, and click [Open] button.
*Microcomputer software rewrite
of the network by serial terminal
connection is not possible.
ADJ - 13
7. When load of the microcomputer software is completed, a checkmark and path and a version are displayed.
* When do not do update in Microprocessor Software which did load, exclude a checkmark of Microprocessor
  to fall under.
   Without a mistake, click a [Update] button.
ADJ - 13
Page of 14
Display

Click on the first or last page to see other PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man11) service manuals if exist.