Panasonic PT-DW7000U / PT-DW7000E Simplified Service Manual ▷ View online
1.2.2 PT-DW7000E
TOP
PREVIOUS
NEXT
TOP
PREVIOUS
NEXT
2 Convergence Adjustment
TOP
PREVIOUS
When DMD/prism block is replaced, image display position adjustment for Red/Blue is required.
Adjust it according to the following procedure.
Adjust it according to the following procedure.
1. Turn ON the projector and set it to "Serviceman Mode".
❍
Enter the serviceman mode according to the procedure of section 4.1. "Setting to
Serviceman Mode" in the original service manual for PT-D7700U/E.
Serviceman Mode" in the original service manual for PT-D7700U/E.
2. Select TEST PATTERN in MAIN MENU, then enter the sub menu and display the focus
pattern.
3. Return to the main menu, then select and enter EXTRA OPTION.
4. Select CONVERGENCE in EXTRA OPTION, then enter the sub menu and adjust V/H
position of R and B to minimize the misalignment of the Red/Blue image to Green image.
Caution:
❍
Do not adjust G.
5. Press MENU button several times and return to the main menu.
TOP
PREVIOUS
2 Convergence Adjustment
TOP
PREVIOUS
When DMD/prism block is replaced, image display position adjustment for Red/Blue is required.
Adjust it according to the following procedure.
Adjust it according to the following procedure.
1. Turn ON the projector and set it to "Serviceman Mode".
❍
Enter the serviceman mode according to the procedure of section 4.1. "Setting to
Serviceman Mode" in the original service manual for PT-D7700U/E.
Serviceman Mode" in the original service manual for PT-D7700U/E.
2. Select TEST PATTERN in MAIN MENU, then enter the sub menu and display the focus
pattern.
3. Return to the main menu, then select and enter EXTRA OPTION.
4. Select CONVERGENCE in EXTRA OPTION, then enter the sub menu and adjust V/H
position of R and B to minimize the misalignment of the Red/Blue image to Green image.
Caution:
❍
Do not adjust G.
5. Press MENU button several times and return to the main menu.
TOP
PREVIOUS
2 Convergence Adjustment
TOP
PREVIOUS
When DMD/prism block is replaced, image display position adjustment for Red/Blue is required.
Adjust it according to the following procedure.
Adjust it according to the following procedure.
1. Turn ON the projector and set it to "Serviceman Mode".
❍
Enter the serviceman mode according to the procedure of section 4.1. "Setting to
Serviceman Mode" in the original service manual for PT-D7700U/E.
Serviceman Mode" in the original service manual for PT-D7700U/E.
2. Select TEST PATTERN in MAIN MENU, then enter the sub menu and display the focus
pattern.
3. Return to the main menu, then select and enter EXTRA OPTION.
4. Select CONVERGENCE in EXTRA OPTION, then enter the sub menu and adjust V/H
position of R and B to minimize the misalignment of the Red/Blue image to Green image.
Caution:
❍
Do not adjust G.
5. Press MENU button several times and return to the main menu.
TOP
PREVIOUS