DOWNLOAD Panasonic PT-DS100XE / PT-DS12KE / PT-DS20K2E / PT-DS20K2EJ / PT-DS20KE / PT-DW11KE / PT-DW17K2E / PT-DW17KE / PT-DW90XE / PT-DZ10KE / PT-DZ110XE / PT-DZ13KE / PT-DZ16K2E / PT-DZ16KE / PT-DZ21K2E / PT-DZ21KE / PT-RQ13KE / PT-RQ22KEJ / PT-RQ32KE / PT-RS11KE / PT-RS30KE / PT-RZ12KE / PT-RZ21KE / PT-RZ31KE Service Manual ↓ Size: 12.5 MB | Pages: 44 in PDF or view online for FREE

Model
PT-DS100XE PT-DS12KE PT-DS20K2E PT-DS20K2EJ PT-DS20KE PT-DW11KE PT-DW17K2E PT-DW17KE PT-DW90XE PT-DZ10KE PT-DZ110XE PT-DZ13KE PT-DZ16K2E PT-DZ16KE PT-DZ21K2E PT-DZ21KE PT-RQ13KE PT-RQ22KEJ PT-RQ32KE PT-RS11KE PT-RS30KE PT-RZ12KE PT-RZ21KE PT-RZ31KE
Pages
44
Size
12.5 MB
Type
PDF
Document
Service Manual / Other
Brand
Device
Projector / 3-CHIP DLP BASED PROJECTOR
File
pt-ds100xe-pt-ds12ke-pt-ds20k2e-pt-ds20k2ej-pt-ds2.pdf
Date

Panasonic PT-DS100XE / PT-DS12KE / PT-DS20K2E / PT-DS20K2EJ / PT-DS20KE / PT-DW11KE / PT-DW17K2E / PT-DW17KE / PT-DW90XE / PT-DZ10KE / PT-DZ110XE / PT-DZ13KE / PT-DZ16K2E / PT-DZ16KE / PT-DZ21K2E / PT-DZ21KE / PT-RQ13KE / PT-RQ22KEJ / PT-RQ32KE / PT-RS11KE / PT-RS30KE / PT-RZ12KE / PT-RZ21KE / PT-RZ31KE Service Manual / Other ▷ View online

DMD chip, FM-PCB and TIR prism Replacing Procedure
DMD chip, FM-PCB and TIR prism Replacing Procedure
9
2. Mount the FM-PCB on the DMD unit.
1. Mount the FM-PCB and insulation sheet and backer plate on the DMD unit.
2. Tighten 4 screws-B each in numerical order 1 to 4 as shown in the picture to fix them on the DMD unit.
3.  (G-DMD only) Mount the thermistor on the backer plate. Its mounting method may differ depending on the models.
3. Mount the radiator pump or heatsink on the DMD unit.
1
3
4
2
(Torque:70 N•cm)
(Torque:70 N•cm)
(Torque:70 N•cm)
(Torque:70 N•cm)
1
2
3
4
1
2
3
4
(Torque:70 N•cm)
(Torque:70 N•cm)
E.g.: PT-RZ31K series
E.g.: PT-RZ12K series
Thermistor
Thermistor
Heatsink
Radiator pump
Pump hold spring
(In case of radiator pump type)
1.  Mount the radiator pump with the pump hold spring on to 
the DMD unit.
2.  Tighten 2 screws-A to fix the pump hold spring.
(In case of heatsink type)
1.  Mount the heatsink on the DMD unit and Tighten 4 screws-
A each in numerical order 1 to 4 as shown in the picture.
Smaller dia side 
of spring comes 
to screw head 
side
A
C
C
B
B
A
DMD chip, FM-PCB and TIR prism Replacing Procedure
DMD chip, FM-PCB and TIR prism Replacing Procedure
10
[2] DMD chip replacement 
Tools:
  • Phillips screw driver, Phillips screw driver with 3.0mm diameter shaft x 2
 
• Flat screw driver
 
• Straight head hex driver [M2.0] and hex wrench [5.5mm] or special wrench (DPKW1001ZA)
Basic procedure of DMD chip replacement
1. Chose one of the R,G, B-DMD chip to be replaced.
2.  Replace with a new DMD chip according to the procedure described below.
3. Mount the DMD block back on the projector.
4. Take the convergence adjustment.
5.  Repeat step 1 to 4 for remaining DMD chips.
6.  Take the color uniformity adjustment on menu [DISPLAY OPTION - [UNIFORMITY], referring to the instruction manual of 
each model*. 
 
* Available models: PT-DZ21K, DZ21K2, RZ12K, RZ31K, RZ21K, Q13K, RQ32K, RQ22K series
DMD chip, FM-PCB and TIR prism Replacing Procedure
DMD chip, FM-PCB and TIR prism Replacing Procedure
11
DMD block
G-DMD unit
D
2. 1. DMD unit removal
1. Chose one of the DMD unit of R, G and B-DMD unit to be replaced.
2. Remove 4 screws-D and take off the DMD unit from the DMD block.
[Note]: The fixing screw type differs depending on the DMD types.
E.g.: PT-RZ12K series
[Note]: 
•  When loosing screws-D, do not use ball pointed hex driver but use 
2.0 mm straight hex driver and special wrench (DPKW1001Z) for 
the longer screws.
DMD chip, FM-PCB and TIR prism Replacing Procedure
DMD chip, FM-PCB and TIR prism Replacing Procedure
12
2. 2. DMD unit disassembling
1. Remove 4 screws/spring-A and take off the DMD heatsink.
2. Remove 4 screws-B and take off the FM-PCB.
3. Remove 2 screws-E and take off the DMD aperture unit.
4. Remove the DMD chip from the alignment plate.
DMD heatsink
B
E
A
C
Backer plate
Insulation sheet
DMD chip
Alignment plate
DMD aperture unit
Thermistor*
* only for G-DMD
Interposer
FM-PCB
Smooth sur-
face side comes 
to FM-PCB side.
Smaller dia side 
of spring comes 
to screw head 
side
E.g.: PT-RZ12K series
[Note]:
•  The mounting method of the thermistor differs depending on 
the models. For further information, refer to each model's 
service manual.
Page of 44
Display

Click on the first or last page to see other PT-DS100XE / PT-DS12KE / PT-DS20K2E / PT-DS20K2EJ / PT-DS20KE / PT-DW11KE / PT-DW17K2E / PT-DW17KE / PT-DW90XE / PT-DZ10KE / PT-DZ110XE / PT-DZ13KE / PT-DZ16K2E / PT-DZ16KE / PT-DZ21K2E / PT-DZ21KE / PT-RQ13KE / PT-RQ22KEJ / PT-RQ32KE / PT-RS11KE / PT-RS30KE / PT-RZ12KE / PT-RZ21KE / PT-RZ31KE service manuals if exist.