Panasonic PT-AX100U / PT-AX100E Service Manual ▷ View online
3. Connect the service kit (extension cables).
·
Each flexible cable of LCD Panels (R/G/B) - Connectors (A1/A2/A3) on A-P.C.Board
·
Thermosensor (Intake air) connector - Connector (A7) on A-P.C.Board
·
Intake fan connector - Connector (A15) on A-P.C.Board
·
Power fan connector - Connector (A16) on A-P.C.Board
·
Lamp fan connector - Connector (A18) on A-P.C.Board
4. Covering with an insulator (cloth or the like) to prevent a short circuit, set the A-P.C.Board block on the main unit.
Note:
·
Handle with care not to apply external force to connecting parts which connect the main unit and A-P.C.Board.
7.5.3. Adjustment Procedure
7.5.3.1. Outline
When the lighting area is off from the adjustment and color unevenness appears, adjust the lighting area into correct position.
Symptom
Measure
Magenta unevenness
G Reflector Adjustment
Cyan unevenness
R Reflector Adjustment
Yellow unevenness
B Reflector Adjustment
·
Shifting the mirror adjusting lever horizontally, adjust color unevenness on the screen upper/lower sides.
·
Twisting the mirror adjusting lever, adjust color unevenness on the screen right/left sides.
25
PT-AX100U / PT-AX100E
7.5.3.2. G Reflector Adjustment
1. Turn on the power and display 100 % white pattern on the screen.
2. Loosen the 2 screws fixing the mirror adjusting lever A just until the lever can be shifted.
3. Adjust the mirror adjusting lever A position to minimize color unevenness on the screen by shifting the lever in arrow directions.
4. Tighten the 2 screws.
7.5.3.3. R Reflector Adjustment
1. Turn on the power and display 100 % white pattern on the screen.
2. Loosen the 2 screws fixing the mirror adjusting lever B just until the lever can be shifted.
3. Adjust the mirror adjusting lever B position to minimize color unevenness on the screen by shifting the lever in arrow directions.
4. Tighten the 2 screws.
7.5.3.4. B Reflector Adjustment
1. Turn on the power and display 100 % white pattern on the screen.
2. Loosen the 2 screws fixing the mirror adjusting lever C just until the lever can be shifted.
3. Adjust the mirror adjusting lever C position to minimize color unevenness on the screen by shifting the lever in arrow directions.
4. Tighten the 2 screws.
7.6. Software for Adjustment
7.6.1. Outline
·
This projector needs computer-aided adjustments.
·
After the software adjustments, this projector must be turned off and on again to memorize the settings.
·
Connect the cable between the projector and a PC as shown below.
·
Updating the software will change the version number.
26
PT-AX100U / PT-AX100E
7.6.2. Operating Procedure
1. Run software program by the keyboard entry.
Note:
·
Use the software program as below.
Adjustment Tool [AX100]
2. The first menu is Port selection menu.
3. Adjust the projector by selecting the necessary item from the menu in each stage.
7.6.3. Port Selection Menu
Select the port name of PC which connects with the projector, then click [Data] or [Adjustment] button.
7.6.3.1. Explanation of Buttons
Data:
Displays the data transmission/reception menu.
Adjustment:
Displays the adjustment menu.
Exit:
Exits this application.
27
PT-AX100U / PT-AX100E
7.6.4. Data Transmission/Reception Menu
7.6.4.1. Explanation of Buttons
Micom Data Transmission:
Reads the microcomputer data from the file and transmits it to the projector.
Micom Data Reception:
Receives the microcomputer data from the projector and writes it in the file.
Gamma Data Transmission:
Reads the gamma data from the file and transmits it to the projector.
Gamma Data Reception:
Receives the gamma data from the projector and writes it in the file.
Uniformity Data Transmission:
Reads the color unevenness correction data from the file and transmits it to the projector.
Uniformity Data Reception:
Receives the color unevenness correction data from the projector and writes it in the file.
Color Management Data Transmission:
Reads the color management data from the file and transmits it to the projector.
Color Management Data Reception:
Receives the color management data from the projector and writes it in the file.
Exit:
Exits this application.
7.6.4.2. Receiving and transmitting of the data
Click a target button and specify a file name.
28
PT-AX100U / PT-AX100E
Click on the first or last page to see other PT-AX100U / PT-AX100E service manuals if exist.