Panasonic KX-MB1500UCB Service Manual ▷ View online
9
KX-MB1500UCB
2.6.
Note for Repairing
Caution
Please inform users of the danger of data being lost at the time of repair.
Data will be lost in the following situations.
1. When replacing the ROM ass'y.
2. When replacing the Main board ass'y.
3. When executing service mode #550 or #710. (Memory Clear)
2. When replacing the Main board ass'y.
3. When executing service mode #550 or #710. (Memory Clear)
There is a possibility of data loss in the following situations.
1. When removing a board.
2. When writing new software to ROM.
2. When writing new software to ROM.
10
KX-MB1500UCB
3 Specifications
Note:
• Design and specifications are subject to change without notice.
• The pictures and illustrations in these instructions may vary slightly from the actual product.
• The pictures and illustrations in these instructions may vary slightly from the actual product.
Document Size:
Max. 216 mm in width, Max. 297 mm in length
Effective Scanning Width:
208 mm
Effective Printing Width:
Letter/ Legal: 208 mm
A4: 202 mm
A4: 202 mm
Scanning Density:
Scanning resolution:
Up to 600
Up to 600
× 1,200 dpi (Optical)
Up to 19,200 x 19,200 dpi (Interpolated)
Copy resolution:
Up to 600
Copy resolution:
Up to 600
× 600 dpi
Photo resolution:
64-level
Scanner Type:
Colour Contact Image Sensor
Printer Type:
Laser printer
Operating Environment:
10
°C-32.5°C, 20%-70% RH (Relative Humidity)
Dimensions:
Approx. width 380 mm x depth 360 mm x height 203 mm
Mass (Weight):
Approx. 9 kg
Power Consumption:
Standby: Approx. 4 W
Preheat: Approx. 55 W
Copy: Approx. 350 W
Maximum: Approx. 950 W (When the fuser lamp turns on)
Preheat: Approx. 55 W
Copy: Approx. 350 W
Maximum: Approx. 950 W (When the fuser lamp turns on)
Power Supply:
220-240 V AC, 50/60 Hz
Memory Capacity (for operation and
storing memory):
storing memory):
32 MB
Laser diode properties:
Laser output: Max. 10 mW
Wavelength: 760 nm-800 nm
Emission duration: Continuous
Wavelength: 760 nm-800 nm
Emission duration: Continuous
Print Speed:
A4: Approx. 18 ppm (pages per minute)
Letter: Approx. 19 ppm (pages per minute)
Letter: Approx. 19 ppm (pages per minute)
Printing Resolution:
600 x 600 dpi
Maximum Monthly Duty Cycle:
5,000 printed pages
CIS’s LED light properties:
LED radiation output: Max. 1 mW
Wavelength:
Red 630 nm typical
Green 520 nm typical
Blue 465 nm typical
Emission duration: Continuous
Wavelength:
Red 630 nm typical
Green 520 nm typical
Blue 465 nm typical
Emission duration: Continuous
Product life:
30,000(Thirty thousand) pages or 5 years whichever comes first.
11
KX-MB1500UCB
4 General/Introduction
4.1.
Optional Accessories
*1
Prints about 1,800 pages at ISO/IEC 19752 standard page.
*2
Prints about 2,500 pages at ISO/IEC 19752 standard page.
Note:
• ISO/IEC 19752 standard is as follows:
- Environment: 23 ± 2
°C / 50 ± 10% RH
- Print mode: Continuous printing
4.2.
Translation Lists
4.2.1.
Error Message (Display)
Model No.
Description
Specifications
KX-FAT400A7
Replacement toner cartridge
*1
1 toner cartridge
KX-FAT410A7
Replacement toner cartridge (high capacity)
*2
1 toner cartridge
12
KX-MB1500UCB
5 Features
5.1.
General Features
General
LCD (Liquid Crystal Display) readout
LCD (Liquid Crystal Display) readout
Flat-Bed Multifunction Printer
Resolution: Standard/Fine/Super fine/Photo (64 level).
STANDARD: For printed or typewritten originals with normal-
sized characters.
FINE: For originals with small printing.
SUPER FINE: For originals with very small printing.
PHOTO: For originals containing photographs, shaded draw-
ing, etc.
Resolution: Standard/Fine/Super fine/Photo (64 level).
STANDARD: For printed or typewritten originals with normal-
sized characters.
FINE: For originals with small printing.
SUPER FINE: For originals with very small printing.
PHOTO: For originals containing photographs, shaded draw-
ing, etc.
150-sheet paper capacity (64 g/m
2
~ 75 g/m
2
)
Approx. 150 pages of memory transmission
Approx. 110 pages of memory reception
Approx. 110 pages of memory reception
Enhanced Copier Function
Multi-copy function (up to 99 copies)
Enlargement and reduction
Multi-copy function (up to 99 copies)
Enlargement and reduction
64-Level halftone
5.2.
Hardware Requirements for Multi-Function Software
To use Multi-Function Station on your computer, the following are required:
Operating System:
Windows 2000 / Windows XP / Windows Vista / Windows 7
CPU:
Windows 2000: Pentium® or higher processor
Windows XP: Pentium or higher processor
Windows Vista / Windows 7: Pentium 4 or higher processor
Windows XP: Pentium or higher processor
Windows Vista / Windows 7: Pentium 4 or higher processor
RAM:
Windows 2000/Windows XP: 128 MB (256 MB or more recommended)
Windows Vista: 512 MB (1 GB or more recommended)
Windows 7: 1 GB (2 GB or more recommended)
Windows Vista: 512 MB (1 GB or more recommended)
Windows 7: 1 GB (2 GB or more recommended)
Other Hardware:
CD-ROM drive
Hard disk drive with at least 600 MB of available space
USB interface
Hard disk drive with at least 600 MB of available space
USB interface
Other:
Internet Explorer
®
5.0 or later
Warning:
• To assure continued emission limit compliance;
- use only shielded USB cable (Example: Hi-Speed USB 2.0 certified cable).
• To protect the unit, use only shielded USB cable in areas where thunderstorms occur.
Click on the first or last page to see other KX-MB1500UCB service manuals if exist.