Panasonic KV-S2087 (serv.man2) Service Manual ▷ View online
8
2.3.
About Lead Free Solder (PbF: Pb free)
Note:
In the information below, Pb, the symbol for lead in the periodic table of elements, will refer to standard solder or solder that con-
tains lead.
We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver,
(Ag), and Copper, (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
tains lead.
We will use PbF when discussing the lead free solder used in our manufacturing process which is made from Tin, (Sn), Silver,
(Ag), and Copper, (Cu).
This model, and others like it, manufactured using lead free solder will have PbF stamped on the PCB. For service and repair
work we suggest using the same type of solder.
Caution
• PbF solder has a melting point that is 50° ~ 70° F, (30° ~ 40°C) higher than Pb solder. Please use a soldering iron with tempera-
ture control and adjust it to 700° ± 20° F, (370° ± 10°C).
Exercise care while using higher temperature soldering irons.
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
Exercise care while using higher temperature soldering irons.
Do not heat the PCB for too long time in order to prevent solder splash or damage to the PCB.
• PbF solder will tend to splash if it is heated much higher than its melting point, approximately 1100°F, (600°C).
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
• When applying PbF solder to double layered boards, please check the component side for excess which may flow onto the
opposite side (See figure, below).
9
2.3.1.
Suggested PbF Solder
There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper,
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
2.4.
Discarding of P. C. Board
When discarding P. C. Board, delete all personal information such as telephone directory and caller list or scrap P. C. Board.
10
3 Specifications
Scanning
*1 The scanning speed differs depending on the host computer, the operating system, the application, the measuring method,
the quantity of data in the image, and the paper type. The scanning speed depends on a measuring method of Panasonic.
*2 Scanning documents with resolution more than 600 dpi may cause memory limit for document sizes more than A5.
*3 For details, see "Compatible Paper". (See 16. Appendix ((Operating Manual P.23).)
*4 Using "Long Paper", you can scan a long document to a series of split scanned images. For details about "Long Paper",
*3 For details, see "Compatible Paper". (See 16. Appendix ((Operating Manual P.23).)
*4 Using "Long Paper", you can scan a long document to a series of split scanned images. For details about "Long Paper",
refer to the Image Capture Plus, TWAIN, or ISIS help.
*5 Portrait orientation only
*6 For details, see "Replacing the Rollers". (See 16. Appendix ((Operating Manual P.51).)
*6 For details, see "Replacing the Rollers". (See 16. Appendix ((Operating Manual P.51).)
• dpi: dots per inch
• "Weight in pounds" of paper represents the weight of 500 (432 mm × 559 mm [17 in. × 22 in.]) sheets.
• "Weight in pounds" of paper represents the weight of 500 (432 mm × 559 mm [17 in. × 22 in.]) sheets.
item
KV-S2087
Scanning face
Duplex
Scanning method
Color CIS (600 dpi)
Scanning speed
*1
•
A4 / Letter
•
Binary / color
•
200 dpi,
300 dpi
300 dpi
Simplex
85 pages/min.
Duplex
170 images/min.
Scanning resolution
100 – 600 dpi
(1 dpi step)
1,200 dpi
(Interpolated)
Optical:
300 dpi / 600 dpi (Automatic switch)
(1 dpi step)
1,200 dpi
(Interpolated)
Optical:
300 dpi / 600 dpi (Automatic switch)
Paper
*3
Width
48 mm – 216 mm (1.9 in. – 8.5 in.)
Length
*4
Automatic feeding:
70 mm – 356 mm (2.75 in. – 14 in.)
Manual feeding:
70 mm – unlimited (2.75 in. – unlimited)
70 mm – 356 mm (2.75 in. – 14 in.)
Manual feeding:
70 mm – unlimited (2.75 in. – unlimited)
Thickness
0.04 mm – 0.66 mm (1.6 mils – 25.98 mils)
Note
1 mil = 0.001 in.
Weight
U-turn path (front exit):
20 g/m² – 157 g/m² (5.2 lb. – 42 lb.)
Straight path (rear exit):
20 g/m² – 157 g/m² (5.2 lb. – 42 lb.)
Straight path (rear exit):
•
Automatic feeding:
20 g/m² – 157 g/m² (5.2 lb. – 42 lb.)
20 g/m² – 157 g/m² (5.2 lb. – 42 lb.)
•
Manual feeding:
20 g/m² – 546 g/m² (5.2 lb. – 145 lb.)
20 g/m² – 546 g/m² (5.2 lb. – 145 lb.)
Feed capacity
200 sheets (80 g/m² [21 lb.] High-quality
woodfree paper)
220 sheets (64 g/m² [17 lb.] High-quality
woodfree paper)
woodfree paper)
220 sheets (64 g/m² [17 lb.] High-quality
woodfree paper)
Card
*5
Format
ISO format
Size
85.6 mm × 54 mm (3.4 in. × 2.1 in.)
Thickness
0.76 mm (0.03 in.)
Roller replacement
*6
350,000 sheets
*2
11
General
*1 About the environmental conditions of Imprinter Unit (KV-SS020), refer to the Installation Manual of Imprinter Unit. When
printing in conditions outside of the imprinter unit’s operating environment, the printing result may be faded or printing may
not occur.
not occur.
Model Suffix and serial No.
Model
Area
Serial No.
KV-S2087-U
Europe & others
G77 xxxx 1001
KV-S2087-M
North America
G79 xxxx 1001
KV-S2087-J
North America
G80 xxxx 1001
KV-S2087-CN
China
G81 xxxx 1001
KV-S2087-B
Brazil
G82 xxxx 1001
KV-S2087-N
Japan
G78 xxxx 1001
Item
KV-S2087
External dimensions
(Width × Depth × Height)
(Width × Depth × Height)
350 × 319 × 242 mm (13.78 × 12.56 × 9.53 in.)
(Not including protruding parts)
(Not including protruding parts)
Weight
9 kg (19.84 lb.)
Power requirement
AC100 – 127 V, 50/60 Hz, 1.2 A
AC100 – 240 V, 50/60 Hz, 1.2 – 0.7 A
AC220 – 240 V, 50/60 Hz, 0.7 A
AC100 – 240 V, 50/60 Hz, 1.2 – 0.7 A
AC220 – 240 V, 50/60 Hz, 0.7 A
Power
consumption
consumption
Scanning
65 W or less
Ready
20 W or less
Sleep
3.0 W or less
Power OFF
0.5 W or less
Environment
*1
Operating environment
Temperature: 5
– 35
(41
– 95 )
Humidity: 20 % – 80 % RH
Non-operating
environment
environment
Temperature: -20
– 60
(-4
– 140 )
Humidity: 8 % – 95 % RH
Storage environment
Temperature: -10
– 50
(14
– 122 )
Humidity: 8 % – 75 % RH
Interface
USB 3.0
Click on the first or last page to see other KV-S2087 (serv.man2) service manuals if exist.