Panasonic DP-8060 / DP-8045 / DP-8035 (serv.man2) Service Manual ▷ View online
49
DEC 2006
Ver. 1.1
DP-8060/8045/8035
(12) Remove 3 Screws (Y37).
(13) Remove the Lower Opening, and Shutting
(13) Remove the Lower Opening, and Shutting
Guide 1 (601).
(14) Remove the Separation Roller Assembly.
(15) Remove the Snap Ring (H6).
Note:
When reinstalling, make sure that the Snap Ring is
installed properly as illustrated.
installed properly as illustrated.
50
DEC 2006
Ver. 1.1
DP-8060/8045/8035
(16) Remove the Separation Roller Shaft (607).
(17) Remove the Separation Roller (610).
(17) Remove the Separation Roller (610).
Note:
When reassembling the Separation Roller, make
sure that the Yellow Tooler's Die on the side of the
roller is positioned as illustrated (facing the Front
Frame).
sure that the Yellow Tooler's Die on the side of the
roller is positioned as illustrated (facing the Front
Frame).
(18) Lift the Lower Opening, and Shutting Guide 2
Assembly.
(19) Clean the Inverting Roller (809) with a soft
cloth, saturated with isopropyl alcohol.
(20) Open the ADF Unit.
(21) Remove 2 Screws (H5).
(22) Remove the ADF Front Cover (418).
(23) Close the ADF Unit.
(21) Remove 2 Screws (H5).
(22) Remove the ADF Front Cover (418).
(23) Close the ADF Unit.
Note:
Release 3 Latch Hooks to remove the ADF Front
Cover.
Cover.
51
DEC 2006
Ver. 1.1
DP-8060/8045/8035
(24) Remove 1 Screw (J2).
(25) Loosen 3 Screws (S6).
(26) Lift up the Original Tray Assembly.
(27) Remove the ADF Rear Cover (627).
(25) Loosen 3 Screws (S6).
(26) Lift up the Original Tray Assembly.
(27) Remove the ADF Rear Cover (627).
(28) Remove 3 Screws (Y26).
(29) Remove the Jam Release Bracket (632).
(29) Remove the Jam Release Bracket (632).
(30) Remove 1 Screw (X5).
(31) Remove the Front ADF Cover Bracket (529).
(31) Remove the Front ADF Cover Bracket (529).
(32) Release the ADF Cover Arm (624).
(33) Remove the ADF Cover Assembly (502).
(33) Remove the ADF Cover Assembly (502).
52
DEC 2006
Ver. 1.1
DP-8060/8045/8035
Note:
When reinstalling the ADF Cover Assembly, make
sure that the Vibration Guide Sheet 1, and 2 are
reinstalled properly as illustrated.
sure that the Vibration Guide Sheet 1, and 2 are
reinstalled properly as illustrated.
(34) Remove 1 Screw (X5).
(35) Remove the Registration Guide 2 (721).
(35) Remove the Registration Guide 2 (721).
(36) Clean the Registration Roller 2 (818).
(37) Remove the Snap Ring (G6).
(38) Remove the D8 Bearing (822).
(38) Remove the D8 Bearing (822).
Click on the first or last page to see other DP-8060 / DP-8045 / DP-8035 (serv.man2) service manuals if exist.