DOWNLOAD Panasonic DP-8020E / DP-8020P / DP-8016P (serv.man2) Service Manual ↓ Size: 15.37 MB | Pages: 127 in PDF or view online for FREE

5

6

Depending on your machine’s model, it may weight approximately 93.26 - 98.33 
lb (42.3 - 44.6 kg)  without any options. 
To prevent injuries, use the appropriate number of personnel to lift, or move
the machine as illustrated.
Do not lift the machine by the Paper Tray as it may cause damage and/or bodily 
injury.

Refer to the Installation Instructions when installing the machine.

7

Ensure that the plug connection is free of dust. In a damp environment, a contaminated
connector can draw a significant amount of current that can generate heat and eventually
cause fire if left unattended over an extended period of time.

Always use the power cord provided with your machine. When an extension power cord is
required, always use a properly rated cord.

120 V/15 A or AC 220 - 240V/10 A

If you use a cord with an unspecified current rating, it may be underrated, and the machine, 
or plug may emit smoke, orbecome hot to the touch.

Do not attempt to repair, pull, bend, chafe or otherwise damage the power cord. Do not
place a heavy object on the cord. A damaged cord can cause fire or electric shocks.

Never touch a power cord with wet hands. Danger of electric shock exists.

If the power cord is damaged, or insulated wires are exposed, contact the authorized 
Panasonic dealer for a replacement. Using a damaged cord can cause fire or electric 

Stop operation immediately if your machine emits smoke, excessive heat, unusual noise, or
abnormal smell, or if water is spilt onto the machine. These conditions can cause fire.
Immediately switch Off and unplug the machine, and contact the authorized Panasonic 

.

Do not disconnect or reconnect the machine while the power switch is in the On position.
Disconnecting a live connector can cause arcing, consequently deforming the plug and
cause fire.

When disconnecting the machine, grasp the plug instead of the cord. Pulling on a cord
forcibly can damage it, and cause fire, or an electric shock.

When the machine is not used over an extended period of time, switch it Off and unplug it.
If an unused machine is left connected to a power source for a long period, degraded insulation
can cause electric shocks, current leakage or fire.

Be sure to switch Off, and unplug the machine before accessing the interior of the machine
for cleaning, maintenance or fault clearance. Access to a live machine's   interior can cause
an electric shock.

To prevent severe injury and loss of life, read this section carefully before servicing the Panasonic
machine to ensure proper, and safe operation of your machine.

This section explains the Warnings and Cautions used in the machine and/or this manual.

Denotes a potential hazard that could result in serious injury or death.

Denotes hazards that could result in minor injury or damage to the machine.

This section also explains the Warnings and Cautions used in the machine and/or this manual.

These symbols are used to alert operators to a specific operating procedure
that must not be performed.

These symbols are used to alert operators to a specific operating procedure
that must be emphasized in order to operate the machine safely.

Please ensure that the machine is installed near a wall outlet, and is easily accessible.

shocks.

dealer.

8

Once a month, unplug the machine and check the power cord for the following. If you notice any unusual
condition, contact your authorized Panasonic dealer

.

The power cord is plugged firmly into the receptacle.
The plug is not excessively heated, rusted, or bent.
The plug and receptacle are free of dust.
The cord is not cracked or frayed.

Do not touch areas where these caution labels are attached to, the surface may be very hot and may cause
severe burns.

Do not place any liquid container such as a vase, or coffee cup on the machine. Spilt water can cause fire or
shock hazard.

Do not place any metal parts such as staples or clips on the machine. If metal and flammable parts get into the
machine, they can short-circuit internal components, and cause fire or electric shocks.

If debris (metal or liquid) gets into the machine, switch Off and unplug the machine immediately.
Operating a debris-contaminated machine can cause fire or electric shock.

Do not try to alter the machine configuration or modify any parts. An unauthorized modification can cause
smoke or fire.

Never dispose of toner, toner cartridge, or a waste toner container into an open flame. Toner remaining in the
cartridge/bottle can cause an explosion, burns and/or injuries.

Keep button batteries/stamp out of the reach of children to prevent chocking or poisoning. If a button
battery/verification stamp is swallowed accidentally, get medical treatment immediately.

Do not place the machine near heaters or volatile, flammable, or combustible materials such as curtains that
may catch fire.

Do not place the machine in a hot, humid, dusty, or poorly ventilated environment. Prolonged exposure to
these adverse conditions can cause fire or electric shocks.

Place the machine on a level and sturdy surface that can withstand the weight of the machine. 
Refer to the Specifications section for the weight of the machine.
If tilted, the machine may tip-over and cause injuries.

When moving the machine, be sure to unplug the power cord from the outlet. If the machine is moved with the
power cord attached, it can cause damage to the cord which could result in fire or electric shock.

When relocating the machine, remove the toner and/or developer, and pack the machine

e with proper

packing materials for shipping.

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.
See