DOWNLOAD Panasonic TX-PR65V10 Service Manual ↓ Size: 19.6 MB | Pages: 127 in PDF or view online for FREE

25

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Remove the Support metal (C). (See section 8.17.)
3. Remove the screws (

×2 , 

×2 

 each) and remove the

Vertical bar-down assy (L, R).

4. Remove the screws (

×4 

 each) and remove the V-bar

connecting metal-top (L, R).

5. Remove the screws (

×2 

) and remove the V-bar fixing

metals (L, R).

6. Remove the screws (

×2 

 each) and remove V-bar con-

necting metal-bottom (L, R) and the Bracket covers (L,
R).

1. Remove the Control button unit. (See section 8.9.)
2. Remove the Support metal (C). (See section 8.17.)
3. Remove the Support metal (R). (See section 8.18.)
4. Remove the Vertical bar-down assy. (See section 8.19.)
5. Remove the flexible cables holder fastening screws (

×10

).

6. Disconnect the flexible cables (CB1, CB2, CB3, CB4 and

CB5).

7. Disconnect the flexible cable (C10).
8. Disconnect the connector (C14).
9. Remove the screws (

×5 

) and remove the C1-Board.

1. Remove the Support metal (C). (See section 8.17.)
2. Remove the flexible cables holder fastening screws (

×10

).

3. Disconnect the flexible cables (CB6, CB7, CB8, CB9 and

CB10).

4. Disconnect the flexible cables (C20, C21 and C26).
5. Remove the screws (

×5 

) and remove the C2-Board.

26

1. Remove the Tuner unit. (See section 8.9.)
2. Remove the Support metal (C). (See section 8.17.)
3. Remove the Support metal (L). (See section 8.18.)
4. Remove the Vertical bar-down assy. (See section 8.19.)
5. Remove the flexible cables holder fastening screws (

×10

).

6. Disconnect the flexible cables (CB11, CB12, CB13, CB14

and CB15).

7. Disconnect the flexible cables (C31 and C36).
8. Disconnect the connectors (C33 and C35).
9. Remove the screws (

×5 

) and remove the C3-Board.

1. Remove the cabinet assy and the plasma panel fastening

screws (

×12 , 

×4 ).

2. For leaving the plasma panel from the front frame, pull the

bottom of the cabinet assy forward, lift, and remove.

1. Remove the Cabinet assy. (See section 8.21.)
2. Unlock the cable clampers to free the cable.
3. Remove the screws (

×4 , 

×4 ).

4. Remove the Joint metal top (

×4) and the Joint metal bot-

tom (

×4).

5. Remove the screws (

×4 ).

6. Remove the Glass holder bottom.
7. Remove the screws (

×2 ).

8. Remove the Glass holder top.
9. Remove the screws (

×8 ).

10. Remove the Glass holders (L, R).

27

1. Remove the Glass holders. (See section 8.24.)
2. Remove the screw (

×1  

each).

3. Remove the Rear cover fix holders (L, R).

1. Remove the Glass holder bottom. (See section 8.24.)
2. Remove the screws (

×2 

) and remove the S-Board

unit.

3. Disconnect the connector (S1B).
4. Remove the screw (

×1

).

5. Remove the S-Board from the Power button bracket.

6. Remove the claws (

×2 ).

7. Remove the Power button from the Power button bracket.

28

1. Remove the Glass holder bottom. (See section 8.24.)
2. Remove the screws (

×2 ).

3. Remove the claw (

×1 ).

4. Disconnect the connector (K1) and remove the K-Board

from LED Panel.

1. Remove the Glass holder bottom. (See section 8.24.)
2. Remove the screws (

×2 ).

3. Disconnect the connector (GL02) and remove the GL-

Board.

1. Place a carton box packed a new plasma panel on the flat

surface of the work bench.

2. Open a box and without taking a new plasma panel;

Attach the C1-Board, C2-Board and the C3-Board, con-
nect the flexible cables from the plasma panel to the C1-
Board, C2-Board and the C3-Board, and fit the flexible
cable holders.

3. Attach the Hanger metals and the Stand brackets to the

new plasma panel.

4. Place the plasma panel on the servicing stand taking hold

of the Hanger metals.

5. Attach the cabinet assy and each P.C.Board and so on, to

the new plasma panel.