DOWNLOAD Panasonic TX-PR50S10 Service Manual ↓ Size: 11.73 MB | Pages: 127 in PDF or view online for FREE

21

1. Remove the Control button unit. (See section 7.7.)
2. Remove the flexible cables (SD1B, SD2B, SD3B, SD4B

and SD5B) connected to the SD-Board.

3. Remove the flexible cable (SU11-SD11) and the bridge

connectors (SC42-SD42 and SC46-SD46).

4. Remove the molding prop (

×1 ).

5. Remove the screws (

×2 , 

×2 

) and remove the SD-

Board.

1. Remove the SU-Board and SD-Board. (See section 7.9.

and 7.10.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (

×6 

) and remove the SC-Board.

1. Remove the Tuner unit. (See section 7.4.)
2. Disconnect the bridge connector (SS21-SS24) and dis-

connect the flexible cable (SS58).

3. Remove the screws (

×2 

) and remove the SS2-Board. 

22

1. Remove the Tuner unit. (See section 7.4.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SS11 and SS33).
4. Disconnect the flexible cables (SS53, SS55 and SS56).
5. Disconnect the bridge connector (SS21-SS24).
6. Remove the screws (

×6 

) and remove the SS-Board.

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Remove the Hanger metals (L, R) fastening screws (

×4

 each) and remove the Hanger metals (L, R).

3. Remove the Stand brackets (L, R) fastening screws (

×4

 each) and remove the Stand bracket metals (L, R)

and the Stand brackets (L, R).

1. Remove the Control button unit. (See section 7.7.)
2. Remove the flexible cables holder fastening screws (

×8

).

3. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
4. Disconnect the flexible cable (C10).
5. Remove the screws (

×4 

) and remove the C1-Board.

1. Remove the Hanger metal R and the Stand bracket R.

(See section 7.14.)

2. Remove the flexible cables holder fastening screws (

×8

).

3. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
4. Disconnect the flexible cables (C20, C21 and C26).
5. Disconnect the connector (C24).
6. Remove the screws (

×4 

) and remove the C2-Board.

23

1. Remove the Tuner unit. (See section 7.4.)
2. Remove the Hanger metal L and the Stand bracket L.

(See section 7.14.)

3. Remove the flexible cables holder fastening screws (

×14

).

4. Disconnect the flexible cables (CB9, CB10, CB11, CB12,

CB13, CB14 and CB15).

5. Disconnect the flexible cables (C31 and C36).
6. Disconnect the connectors (C33 and C35).
7. Remove the screws (

×5 

) and remove the C3-Board.

1. Remove the cabinet assy and the plasma panel fastening

screws (

×2 ).

2. For leaving the plasma panel from the front frame, pull the

bottom of the cabinet assy forward, lift, and remove.

3. Remove the Rear cover hooks (L, R).

1. Remove the Cabinet assy. (See section 7.18.)
2. Remove the S-Board shield case.

24

3. Remove the screws (

×2 

) and remove the S-Board

unit.

4. Disconnect the connector (S1).
5. Remove the Power button.
6. Remove the screw (

×1 

) and remove the S-Board.

1. Remove the Cabinet assy. (See section 7.18.)
2. Remove the S-Board. (See section 7.19.)
3. Remove the screws (

×6 ).

4. Remove the screws (

×4 ).

5. Remove the Glass holder side (L, R).
6. Remove the screws (

×8 ).

7. Remove the Glass holder top front.
8. Remove the Glass holder bottom front.
9. Remove the Front glass.

1. Remove the Front glass. (See section 7.20.)
2. Remove the screw (

×2 ).

3. Remove the claw (

×1 ).

4. Disconnect the connector (K1) and remove the K-Board

from LED Panel.