DOWNLOAD Panasonic TX-PR46G10 Service Manual ↓ Size: 11.91 MB | Pages: 127 in PDF or view online for FREE

21

1. Remove the SU-Board and SD-Board. (See section 7.10.

and 7.11.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (

×8 

) and remove the SC-Board.

1. Remove the Tuner unit. (See section 7.5.)
2. Disconnect the bridge connector (SS21-SS24) and dis-

connect the flexible cable (SS58).

3. Remove the screws (

×2 

) and remove the SS2-Board. 

1. Remove the Tuner unit. (See section 7.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SS11 and SS33).
4. Disconnect the flexible cables (SS61, SS63 and SS64).
5. Disconnect the bridge connector (SS21-SS24).
6. Remove the screws (

×7 

) and remove the SS-Board.

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Remove the Hanger metals (L, R) fastening screws (

×4

 each) and remove the Hanger metals (L, R).

22

3. Remove the Stand brackets (L, R) fastening screws (

×4

 each) and remove the Stand bracket metals (L, R)

and the Stand brackets (L, R).

1. Remove the Control button unit. (See section 7.8.)
2. Remove the flexible cables holder fastening screws (

×8

).

3. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
4. Disconnect the flexible cable (C10).
5. Remove the screws (

×4 

) and remove the C1-Board.

1. Remove the Hanger metal R and the Stand bracket R.

(See section 7.15.)

2. Remove the flexible cables holder fastening screws (

×8

).

3. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
4. Disconnect the flexible cables (C20, C21 and C26).
5. Disconnect the connector (C24).
6. Remove the screws (

×4 

) and remove the C2-Board.

1. Remove the Tuner unit. (See section 7.5.)
2. Remove the Hanger metal L and the Stand bracket L.

(See section 7.15.)

3. Remove the flexible cables holder fastening screws (

×14

).

4. Disconnect the flexible cables (CB9, CB10, CB11, CB12,

CB13, CB14 and CB15).

5. Disconnect the flexible cables (C31 and C36).
6. Disconnect the connectors (C33 and C35).
7. Remove the screws (

×4 

) and remove the C3-Board.

1. Remove the cabinet assy and the plasma panel fastening

screws (

×2 ).

23

2. For leaving the plasma panel from the front frame, pull the

bottom of the cabinet assy forward, lift, and remove.

3. Remove the Rear cover hooks (L, R).

1. Remove the Cabinet assy. (See section 7.19.)
2. Remove the S-Board shield case.

3. Remove the screws (

×2 

) and remove the S-Board

unit.

4. Disconnect the connector (S1).
5. Remove the Power button.
6. Remove the screw (

×1 

) and remove the S-Board.

24

1. Remove the Cabinet assy. (See section 7.19.)
2. Remove the S-Board. (See section 7.20.)
3. Remove the screws (

×6 ).

4. Remove the screws (

×4 ).

5. Remove the Glass holder side (L, R).
6. Remove the screws (

×8 ).

7. Remove the Glass holder top front.
8. Remove the Glass holder bottom front.
9. Remove the Front glass.

1. Remove the Front glass. (See section 7.21.)
2. Remove the screw (

×2 ).

3. Remove the claw (

×1 ).

4. Disconnect the connector (K1) and remove the K-Board

from LED Panel.

1. Remove the Front glass. (See section 7.21.)
2. Remove the claws (

×3 ).

3. Disconnect the connector (GL02) and remove the GL-

Board.

1. Place a carton box packed a new plasma panel on the flat

surface of the work bench.

2. Open a box and without taking a new plasma panel;

Attach the C1-Board, C2-Board and the C3-Board, con-
nect the flexible cables from the plasma panel to the C1-
Board, C2-Board and the C3-Board, and fit the flexible
cable holders.

3. Attach the Hanger metals and the Stand brackets to the

new plasma panel.

4. Place the plasma panel on the servicing stand taking hold

of the Hanger metals.

5. Attach the cabinet assy and each P.C.Board and so on, to

the new plasma panel.