DOWNLOAD Panasonic TX-PR42V10 Service Manual ↓ Size: 17.73 MB | Pages: 127 in PDF or view online for FREE

21

1. Disconnect the connectors. (D3 and D5)
2. Disconnect the flexible cables. (D20, D31 and D32)
3. Remove the screws (

×3 ).

4. Remove the molding prop (

×1 ).

5. Remove the D-Board.

1. Unlock the cable clampers to free the cable.
2. Remove the screws (

×2 

) and remove the Speaker

metals (L, R).

3. Disconnect the Speaker terminal. 
4. Remove the screws (

×2 ).

5. Remove the screws (

×2 

) and remove the Speakers

(L, R) from the Speaker brackets (L, R).

1. Disconnect the connector (C14).
2. Remove the screws (

×2 ).

3. Remove the Control button unit.

1. Remove the Control button unit. (See section 8.9.)
2. Remove the screws (

×2 ).

3. Remove the GK-Board MTG. metal.

4. Remove the claw (

×3 ).

5. Disconnect the connector (GK1).
6. Remove the GK-Board from Control button.

22

1. Remove the flexible cables (SU1, SU2, SU3 and SU4)

connected to the SU-Board.

2. Remove the flexible cable (SU11-SD11) and the bridge

connector (SC41-SU41).

3. Remove the molding prop (

×1 ).

4. Remove the screws (

×2 , 

×2 

) and remove the SU-

Board.

1. Remove the Control button unit. (See section 8.9.)
2. Remove the flexible cables (SD1, SD2, SD3 and SD4)

connected to the SD-Board.

3. Remove the flexible cable (SU11-SD11) and the bridge

connectors (SC42-SD42 and SC46-SD46).

4. Remove the molding prop (

×1 ).

5. Remove the screws (

×2 , 

×2 

) and remove the SD-

Board.

23

1. Remove the SU-Board and SD-Board. (See section 8.11.

and 8.12.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (

×7 

) and remove the SC-Board.

1. Remove the Tuner unit. (See section 8.5.)
2. Disconnect the bridge connector (SS21-SS24) and dis-

connect the flexible cable (SS58).

3. Remove the screws (

×2 

) and remove the SS2-Board. 

1. Remove the Tuner unit. (See section 8.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SS11 and SS33).
4. Disconnect the flexible cables (SS61 and SS64).
5. Disconnect the bridge connector (SS21-SS24).
6. Remove the screws (

×7 

) and remove the SS-Board.

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Remove the Hanger metals (L, R) fastening screws (

×4

 each) and remove the Hanger metals (L, R).

3. Remove the Stand brackets (L, R) fastening screws (

×4

 each) and remove the Stand bracket metals (L, R)

and the Stand brackets (L, R).

24

1. Remove the Control button unit. (See section 8.9.)
2. Remove the Hanger metal R and the Stand bracket R.

(See section 8.16.)

3. Remove the flexible cables holder fastening screws (

×16

).

4. Disconnect the flexible cables (CB1, CB2, CB3, CB4,

CB5, CB6, CB7 and CB8).

5. Disconnect the connector (C14).
6. Disconnect the flexible cables (C10 and C11).
7. Remove the screws (

×4 

) and remove the C1-Board.

1. Remove the Tuner unit. (See section 8.5.)
2. Remove the Hanger metal L and the Stand bracket L.

(See section 8.16.)

3. Remove the flexible cables holder fastening screws (

×14

).

4. Disconnect the flexible cables (CB9, CB10, CB11, CB12,

CB13, CB14 and CB15).

5. Disconnect the flexible cables (C20 and C21).
6. Disconnect the connectors (C23 and C25).
7. Remove the screws (

×4 

) and remove the C2-Board.

1. Remove the cabinet assy and the plasma panel fastening

screws (

×2 ).

2. Remove the claw (

×2 ).

3. Remove the Rear cover hook holders (L, R).

4. For leaving the plasma panel from the front frame, pull the

bottom of the cabinet assy forward, lift, and remove.