DOWNLOAD Panasonic TX-P50X60E / TX-PR50X60 Service Manual ↓ Size: 1.5 MB | Pages: 36 in PDF or view online for FREE

Model
TX-P50X60E TX-PR50X60
Pages
36
Size
1.5 MB
Type
PDF
Document
Service Manual
Brand
Device
Plasma / GPF16D-E CHASSIS
File
tx-p50x60e-tx-pr50x60.pdf
Date

Panasonic TX-P50X60E / TX-PR50X60 Service Manual ▷ View online

5
2.2.
About lead free solder (PbF)
Note: Lead is listed as (Pb) in the periodic table of elements.
In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder.
The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).
That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
This model uses Pb Free solder in it's manufacture due to environmental conservation issues. For service and repair work, we'd 
suggest the use of Pb free solder as well, although Pb solder may be used.
PCBs manufactured using lead free solder will have the PbF within a leaf Symbol PbF stamped on the back of PCB.
Caution
• Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70 
°F (30~40 °C) higher. Please 
use a high temperature soldering iron and set it to 700 ± 20 
°F (370 ± 10 °C).
• Pb free solder will tend to splash when heated too high (about 1100 
°F or 600 °C).
If you must use Pb solder, please completely remove all of the Pb free solder on the pins or solder area before applying Pb 
solder. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.
• After applying PbF solder to double layered boards, please check the component side for excess solder which may flow onto the 
opposite side. (see figure below)
Suggested Pb free solder
There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper) solder. 
However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used.
6
3 Service Navigation
3.1.
PCB Layout
Board Name
Function
PSS
Power Supply, Sustain Drive
Non serviceable.
PSS-Board should be exchanged for service.
A
Main AV input, processing
K
Remote receiver, Power LED, C.A.T.S sensor
C1
Data Driver (Lower Right)
C2
Data Driver (Lower Left)
SN
Scan Drive
7
3.2.
Applicable signals
COMPONENT (Y, P
B
, P
R
) (from AV2 terminal), HDMI
* Mark: Applicable input signal 
Signal name
COMPONENT
HDMI
525 (480) / 60i, 60p
*
*
625 (576) / 50i, 50p
*
*
750 (720) / 60p, 50p
*
*
1,125 (1,080) / 60i, 50i
*
*
1,125 (1,080) / 60p, 50p, 24p
*
8
4 Specifications
Q
 Product fiche
Q
 Other information
Energy efficiency class (E)
B
Visible screen size (diagonal)
127 cm / 50 inches
On mode average power consumption 
(E)
132 W
Annual energy consumption*
1
 (E)
183 kWh
Rated power consumption
240 W
Standby power consumption*
2
0.40 W
Off mode power consumption (E)
0.30 W
Display resolution
1,024 (W) 
× 768 (H)
*
1
: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. 
The actual energy consumption will depend on how the television is used.
*
2
: When the TV is turned off with the remote control and no function is active.
Dimensions (W 
× H × D)
1,184 mm 
× 757 mm × 266 mm (With Pedestal)
1,184 mm 
× 716 mm × 81 mm (TV only)
Mass
21.5 Net (With Pedestal)
20.5 Net (TV only)
Power source
AC 220-240 V, 50 / 60 Hz
Panel
Plasma panel
Sound
Speaker
(160 mm 
× 40 mm) × 2, 8 Ω
Audio output
20 W (10 W + 10 W)
Headphones
M3 (3.5 mm) stereo mini Jack 
× 1
Operating conditions 
Temperature:
°C- 35 °C
Humidity:
20 % - 80 % RH (non-condensing)
Connection terminals
AV1 input / output
SCART (Audio/Video in, Audio/Video out, RGB in)
AV2 input (COMPONENT / 
VIDEO)
VIDEO:
RCA PIN Type 
× 1 1.0 V [p-p] (75 Ω)
AUDIO L-R:
RCA PIN Type 
× 2 0.5 V [rms]
Y:
1.0 V [p-p] (including synchronization)
P
B
, P
R
:
±0.35 V [p-p]
HDMI1 / 2 input
TYPE A Connectors
HDMI1 :
Content Type, Deep Colour, x.v.Colour™ 
HDMI2 :
Content Type, Audio Return Channel, Deep Colour, 
x.v.Colour™
• This TV supports [ HDAVI Control 5 ] function.
Card slot 
Common Interface slot (complies with CI Plus) 
× 1 
USB
USB2.0 DC 5 V, Max. 500 mA
DIGITAL AUDIO output 
PCM / Dolby Digital / DTS, Fiber optic
Receiving systems / Band name (E)
DVB-C
Digital cable services (MPEG2 and MPEG4-AVC(H.264))
DVB-T 
Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264))
PAL B, G, H, I, SECAM B, G, SECAM L, L
'
 VHF E2 - E12 
VHF H1 - H2 (ITALY)
 VHF A - H (ITALY) 
UHF E21 - E69
 CATV (S01 - S05) 
CATV S1 - S10 (M1 - M10)
 CATV S11 - S20 (U1 - U10) 
CATV S21 - S41 (Hyperband)
PAL D, K, SECAM D, K
 VHF R1 - R2 
VHF R3 - R5
 VHF R6 - R12 
UHF E21 - E69
PAL 525/60 
Playback of NTSC tape from some PAL Video recorders (VCR)
M.NTSC 
Playback from M. NTSC Video recorders (VCR)
NTSC (AV input only) 
Playback from NTSC Video recorders (VCR)
• Check the latest information on the available services at the following website. (English only)
http://panasonic.net/viera/support
Receiving systems / Band name (R)
DVB-C
Digital cable services (MPEG2 and MPEG4-AVC(H.264))
DVB-T 
Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264))
PAL D, K, SECAM D, K
 VHF R1 - R2 
VHF R3 - R5
 VHF R6 - R12 
UHF E21 - E69
PAL 525/60 
Playback of NTSC tape from some PAL Video recorders (VCR)
Page of 36
Display

Click on the first or last page to see other TX-P50X60E / TX-PR50X60 service manuals if exist.