DOWNLOAD Panasonic TX-P50S20E / TX-P50S20L / TX-PF50S20 / TX-PR50S20 Service Manual ↓ Size: 14.71 MB | Pages: 122 in PDF or view online for FREE

25

1. Remove the Side terminal cover and the Side shield

metal. (See section 9.4.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (A1, A6, A7 and A11).
4. Disconnect the flexible cables (A20, A31 and A32).
5. Remove the screws (

×2 

) and remove the Tuner unit.

1. Remove the Tuner unit. (See section 9.5.)
2. Remove the screws (

×2 

) and remove the A-Board.

1. Unlock the cable clampers to free the cable.
2. Disconnect the Speaker terminal.
3. Remove the screws (

×2 

 each) and remove the Speak-

ers (L, R).

1. Remove the flexible cables (SU1, SU2, SU3, SU4 and

SU5) connected to the SU-Board.

2. Remove the flexible cable (SU11-SD11) and the bridge

connector (SC41-SU41).

3. Remove the molding prop (

×1 ).

4. Remove the screws (

×2 , 

×2 

) and remove the SU-

Board.

26

1. Remove the flexible cables (SD1, SD2, SD3, SD4 and

SD5) connected to the SD-Board.

2. Remove the flexible cable (SU11-SD11) and the bridge

connectors (SC42-SD42 and SC46-SD46).

3. Remove the molding prop (

×1 ).

4. Remove the screws (

×2 , 

×2 

) and remove the SD-

Board.

1. Remove the SU-Board and SD-Board. (See section 9.8.

and 9.9.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (

×6 

) and remove the SC-Board.

1. Remove the Tuner unit. (See section 9.5.)
2. Disconnect the bridge connector (SS21-SS24) and dis-

connect the flexible cable (SS58).

3. Remove the screws (

×2 

) and remove the SS2-Board. 

1. Remove the Tuner unit. (See section 9.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SS11 and SS33).
4. Disconnect the flexible cables (SS53 and SS56).
5. Disconnect the bridge connector (SS21-SS24).
6. Remove the screws (

×6 

) and remove the SS-Board.

27

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Remove the Stand brackets (L, R) fastening screws (

×3

 each) and the Stand brackets (L, R).

3. Remove the Hanger metals (L, R) fastening screws (

×2

 each) and remove the Hanger metals (L, R).

1. Remove the flexible cables holder fastening screws (

×8

).

2. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
3. Disconnect the flexible cable (C10).
4. Remove the screws (

×4 

) and remove the C1-Board.

1. Remove the Hanger metal R and the Stand bracket R.

(See section 9.13.)

2. Remove the flexible cables holder fastening screws (

×8

).

3. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
4. Disconnect the flexible cables (C20, C21 and C26).
5. Remove the screws (

×4 

) and remove the C2-Board.

1. Remove the Tuner unit. (See section 9.5.)
2. Remove the Hanger metal L and the Stand bracket L.

(See section 9.13.)

3. Remove the flexible cables holder fastening screws (

×14

).

4. Disconnect the flexible cables (CB9, CB10, CB11, CB12,

CB13, CB14 and CB15).

5. Disconnect the flexible cables (C31 and C36).
6. Disconnect the connectors (C33 and C35).
7. Remove the screws (

×5 

) and remove the C3-Board.

28

1. Remove the cabinet assy and the plasma panel fastening

screws (

×3 ).

2. For leaving the plasma panel from the front frame, pull the

bottom of the cabinet assy forward, lift, and remove.

1. Remove the Cabinet assy. (See section 9.17.)
2. Remove the screws (

×7 ).

3. Remove the Glass holder bottom rear.
4. Remove the screws (

×4 ).

5. Remove the Glass holder side (L, R).
6. Remove the screws (

×7 ).

7. Remove the Glass holder top rear and the Glass holder

top front.

8. Remove the Glass holder bottom front.

1. Remove the Glass holders. (See section 9.18.)
2. Remove the screws (

×2 ).

3. Remove the claws (

×2 ).

4. Disconnect the connector (K1) and Remove the K-Board

from LED Panel.