DOWNLOAD Panasonic TX-P42G20E / TX-P42G20ES / TX-PF42G20S / TX-PR42G20 Service Manual ↓ Size: 15.85 MB | Pages: 127 in PDF or view online for FREE

25

1. Remove the Side terminal cover and the Side shield

metal. (See section 9.4.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (A1, A6, A7 and A11).
4. Disconnect the flexible cables (A20, A31 and A32).
5. Remove the screws (

×2 

) and remove the Tuner unit.

1. Remove the Tuner unit. (See section 9.5.)
2. Remove the screws (

×3 

) and remove the A-Board.

1. Unlock the cable clampers to free the cable.
2. Disconnect the Speaker terminal.
3. Remove the screws (

×2 

 each) and remove the Speak-

ers (L, R).

1. Remove the flexible cables (SM1, SM2, SM3, SM4, SM5,

SM6, SM7 and SM8) connected to the SM-Board.

2. Remove the bridge connectors (SC41-SM41, SC42-

SM42 and SC46-SM46).

3. Remove the molding props (

×4 ).

4. Remove the screws (

×3 , 

×4 

) and remove the SM-

Board.

26

1. Remove the SM-Board. (See section 9.8.)
2. Disconnect the connector (SC2).
3. Disconnect the flexible cable (SC20).
4. Remove the screws (

×7 

) and remove the SC-Board.

1. Remove the Tuner unit. (See section 9.5.)
2. Disconnect the bridge connector (SS21-SS24) and dis-

connect the flexible cable (SS58).

3. Remove the screws (

×2 

) and remove the SS2-Board. 

1. Remove the Tuner unit. (See section 9.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SS11 and SS33).
4. Disconnect the flexible cables (SS61 and SS64).
5. Disconnect the bridge connector (SS21-SS24).

6. Remove the screws (

×6 

) and remove the SS-Board.

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Remove the One leg bracket fastening screws (

×4 

each) and the One leg bracket.

3. Remove the Hanger metals (L, R) fastening screws (

×2

 each) and remove the Hanger metals (L, R).

27

1. Remove the One leg bracket. (See section 9.12.)
2. Remove the Cabinet mount metals fastening screws (

×7

, 

×14 

) and remove the cabinet mount metal top

and the Cabinet mount metal bottom.

1. Remove the Hanger metal R and the One leg bracket.

(See section 9.12.)

2. Remove the Cabinet mount metal bottom (See section

9.13.).

3. Remove the flexible cables holder fastening screws (

×12

).

4. Disconnect the flexible cables (CB1, CB2, CB3, CB4,

CB5, CB6, CB7 and CB8).

5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (

×4 

) and remove the C1-Board.

1. Remove the Tuner unit. (See section 9.5.)
2. Remove the Hanger metal L and the One leg bracket.

(See section 9.12.)

3. Remove the Cabinet mount metal bottom. (See section

9.13.)

4. Remove the flexible cables holder fastening screws (

×10

).

5. Disconnect the flexible cables (CB9, CB10, CB11, CB12,

CB13, CB14 and CB15).

6. Disconnect the flexible cables (C20 and C21).
7. Disconnect the connectors (C23 and C25).
8. Remove the screws (

×4 

) and remove the C2-Board.

1. Remove the cabinet mount metals fastening screws (

×7

).

2. Remove the cabinet assy and the plasma panel fastening

screws (

×3 , 

×8 ).

28

3. For leaving the plasma panel from the front frame, pull the

bottom of the cabinet assy forward, lift, and remove.

1. Remove the Cabinet assy. (See section 9.16.)
2. Remove the screws (

×4 ).

3. Remove the Contact metal top.
4. Remove the screws (

×3 ).

5. Remove the Contact metal bottom.
6. Remove the screws (

×4 ).

7. Remove the Contact metal side (L, R).

1. Remove the Contact metal bottom. (See section 9.17.)
2. Remove the screw (

×1 ).

3. Remove the claw (

×1 ).

4. Disconnect the connector (K1) and Remove the K-Board

from LED Panel.

1. Place a carton box packed a new plasma panel on the flat

surface of the work bench.

2. Open a box and without taking a new plasma panel;

Attach the C1-Board and the C2-Board, connect the flexi-
ble cables from the plasma panel to the C1-Board and the
C2-Board, and fit the flexible cable holders.

3. Attach the Hanger metals and the One leg bracket to the

new plasma panel.

4. Place the plasma panel on the servicing stand taking hold

of the Hanger metals.

5. Attach the cabinet assy and each P.C.Board and so on, to

the new plasma panel.